We need this release out by end of day, so we don't have time to
do this right. Disable the vendor task and manually add c/storage
PR #698 to the vendored copy of c/storage to make the tests pass.
Once #698 merges into c/storage, we need to remove this commit
and backport it to the v1.20 stable branch, then cut a release
there.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This should help alleviate races where the pod is not fully
cleaned up before subsequent API calls happen.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Most Libpod containers are made via `pkg/specgen/generate` which
includes code to generate an appropriate exit command which will
handle unmounting the container's storage, cleaning up the
container's network, etc. There is one notable exception: pod
infra containers, which are made entirely within Libpod and do
not touch pkg/specgen. As such, no cleanup process, network never
cleaned up, bad things can happen.
There is good news, though - it's not that difficult to add this,
and it's done in this PR. Generally speaking, we don't allow
passing options directly to the infra container at create time,
but we do (optionally) proxy a pre-approved set of options into
it when we create it. Add ExitCommand to these options, and set
it at time of pod creation using the same code we use to generate
exit commands for normal containers.
Fixes#7103
Signed-off-by: Matthew Heon <mheon@redhat.com>
<MH: Fixed cherry-pick conflicts>
Signed-off-by: Matthew Heon <mheon@redhat.com>
because a pod's network information is dictated by the infra container at creation, a container cannot be created with network attributes. this has been difficult for users to understand. we now return an error when a container is being created inside a pod and passes any of the following attributes:
* static IP (v4 and v6)
* static mac
* ports -p (i.e. -p 8080:80)
* exposed ports (i.e. 222-225)
* publish ports from image -P
Signed-off-by: Brent Baude <bbaude@redhat.com>
<MH: Fixed cherry pick conflicts and compile>
Signed-off-by: Matthew Heon <mheon@redhat.com>
In podman 1.0 if you executed a command like:
podman run --user dwalsh --cap-add net_bind_service alpine nc -l 80
It would work, and the user dwalsh would get the capability, in
podman 2.0, only root and the binding set gets the capability.
This change restores us back to the way podman 1.0 worked.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fixes: 4c75fe3f70 ("fix pod creation with "new:" syntax")
Commit 4c75fe3f70 passes all net options to the pod but forgot
to unset the options for the container creation. This leads to
erros when using flags like `--ip` since we tried setting
the ip on the pod and container which obviously fails.
I didn't notice the bug because we don't throw an error when
specifing port bindings on a container which joins the pods
network namespace. (#7373)
Also allow the use of `--hostname` and pass that option to the
pod and unset it for the container. The container has to use
the pods hostname anyway. This would error otherwise.
Added tests to prevent regression.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We should default to the user name unmount rather then the internal
name of umount.
Also User namespace was not being handled correctly. We want to inform
the user that if they do a mount when in rootless mode that they have
to be first in the podman unshare state.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* override --url and/or --identity fields from containers.conf
* --connection flag has higher precedence than ActiveService from
containers.conf. Which is set via podman system connection default
* Add newline to error message printed on stderr
* Added --connection to bash completion and documentation
* Updated bindings to query server in case of no path or /
Closes #jira-991
Fixes#7276
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Squashed commits to work around CI issue
<MH: Fixed rebase conflicts on v2.0>
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
instead of hiding the latest options for podman-remote or catching an error if podman --remote <cmd> -l is used, we no longer add the latest option to any remote command. podman will error with a "unknown flag" option.
Fixes: #7127
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add better error message when using `--pod` and `--hostname`.
Improve the docs to better explain the uts hostname relation.
Add more valid options for the `--uts` flag.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
create a scope everytime we don't own the current cgroup and we are
running on systemd.
Closes: https://github.com/containers/podman/issues/6734
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Make sure that arguments with whitespace are properly quoted so they are
interpreted as one (and not multiple ones) by systemd.
Now `-e tz="america/new york"` will be generated as `-e "tz=america/new york"`.
The quotes are moving but the argument is still correct.
Fixes: #7285
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When `podman rmi --force` is run, it will remove any containers
that depend on the image. This includes Podman containers, but
also any other c/storage users who may be using it. With Podman
containers, we use the standard Podman removal function for
containers, which handles all edge cases nicely, shutting down
running containers, ensuring they're unmounted, etc.
Unfortunately, no such convient function exists (or can exist)
for all c/storage containers. Identifying the PID of a Buildah,
CRI-O, or Podman container is extremely different, and those are
just the implementations under the containers org. We can't
reasonably be able to know if a c/storage container is *in use*
and safe for removal if it's not a Podman container.
At the very least, though, we can attempt to unmount a storage
container before removing it. If it is in use, this will fail
(probably with a not-particularly-helpful error message), but if
it is not in use but not fully cleaned up, this should make our
removing it much more robust than it normally is.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When we rewrote Podman's pkg/spec, one of the things that was
lost was our use of a set of default environment variables, that
ensure all containers have at least $PATH and $TERM set.
While we're in the process of re-adding it, change it from a
variable to a function, so we can ensure the Join function does
not overwrite it and corrupt the defaults.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Refactor the processing of Repository and Tag fields to default to <none>
when printing via --format flag. Previously, the default format would
print <none> but --format {{.Tag}} would not in some cases.
Fixes#7123
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Buildah and podman build can create images without a working dir.
FROM fedora
WORKDIR /test
If you build this image with caching twice, the second time the image
will not have a working dir.
Similarly if you execute
podman run --workdir /foobar fedora
It blows up since the workingdir is not created automatically.
Finally there was duplicated code for getting the workingdir
out of an image, that this PR removes.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This matches Docker behavior, and seems to make sense - the CMD
may have been specific to the original entrypoint and probably
does not make sense if it was changed.
While we're in here, greatly simplify the logic for populating
the SpecGen's Command. We create the full command when making the
OCI spec, so the client should not be doing any more than setting
it to the Command the user passed in, and completely ignoring
ENTRYPOINT.
Fixes#7115
Signed-off-by: Matthew Heon <mheon@redhat.com>
A recent crun change stopped the creation of the container's
working directory if it does not exist. This is arguably correct
for user-specified directories, to protect against typos; it is
definitely not correct for image WORKDIR, where the image author
definitely intended for the directory to be used.
This makes Podman create the working directory and chown it to
container root, if it does not already exist, and only if it was
specified by an image, not the user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
To sync the behavior between AppArmor and seccomp it is now possible to
also specify seccomp profiles for privileged containers.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Podman 1.6.2 changed systemd mode auto-detection from commands ending in
``init`` to hard-coded paths ``/sbin/init`` and ``/usr/sbin/init``. This
broke FreeIPA container. ``podman run`` and ``podman create`` now
activate systemd mode when the command is ``/usr/local/sbin/init``.
Fixes: https://github.com/containers/podman/issues/7287
Signed-off-by: Christian Heimes <cheimes@redhat.com>
the deepcopy in the remote history code path was throwing an uncaught error on a type mismatch. we now manually do the conversion and fix the type mismatch on the fly.
Fixes: #7122
Signed-off-by: Brent Baude <bbaude@redhat.com>
upon image build completion, a new image type event is written for "build". more intricate details, like pulling an image, that might be done by build must be implemented in different vendored packages only after libpod is split from podman.
Fixes: #7022
Signed-off-by: Brent Baude <bbaude@redhat.com>
<MH: Fixed imports during cherry-pick>
Signed-off-by: Matt Heon <matthew.heon@pm.me>
I used the wrong propagation first time around because I forgot
that rprivate is the default propagation. Oops. Switch to
rprivate so we're using the default.
Signed-off-by: Matthew Heon <mheon@redhat.com>
podman save uses named pipe as output path, not directly using /dev/stdout.
fix#7017
Signed-off-by: Qi Wang <qiwan@redhat.com>
<MH: Corrected imports during cherry-pick>
Signed-off-by: Matt Heon <matthew.heon@pm.me>
I'm not sure if this is an OS-specific issue, but on CentOS 8, if `path`
doesn't exist, this hangs while waiting to read from this socket, even
though the socket is closed by the `reexec_in_user_namespace`. Switching
to a pipe fixes the problem, and pipes shouldn't be an issue since this is
Linux-specific code.
Signed-off-by: Jonathan Dieter <jonathan.dieter@spearline.com>
