Use libimage for removing the manifest instead of going directly
through the store.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
First, make podman diff accept optionally a second argument. This allows
the user to specify a second image/container to compare the first with.
If it is not set the parent layer will be used as before.
Second, podman container diff should only use containers and podman
image diff should only use images. Previously, podman container diff
would use the image when both an image and container with this name
exists.
To make this work two new parameters have been added to the api. If they
are not used the previous behaviour is used. The same applies to the
bindings.
Fixes#10649
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
feat: read secret config from config file if the user hasn't entered
explicit config values
feat: allow to specify `--driver-opts opt1=val1,opt2=val2` in the secret
create command to allow overriding the default values
fix: show driver options in `podman secret inspect`
Signed-off-by: Tino Rusch <tino.rusch@gmail.com>
When starting a process with `podman exec -it` the terminal is resized
after the process is started. To fix this allow exec start to accept the
terminal height and width as parameter and let it resize right before
the process is started.
Fixes#10560
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
added handling in entities and compat to support passing a specified OS/Arch while importing from SRC.
fixes#10566
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
* Add podman-restart systemd unit file and add it to podman RPM package
* Fix podman start to filter all containers + unit test
Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
Podman uses the volume option map to check if it has to mount the volume
or not when the container is started. Commit 28138dafcc added to uid
and gid options to this map, however when only uid/gid is set we cannot
mount this volume because there is no filesystem or device specified.
Make sure we do not try to mount the volume when only the uid/gid option
is set since this is a simple chown operation.
Also when a uid/gid is explicity set, do not chown the volume based on
the container user when the volume is used for the first time.
Fixes#10620
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We were previously only doing this for detached exec. I don't
know why we did that, but I don't see any reason not to extend it
to all exec sessions - it guarantees that we will always clean up
exec sessions, even if the original `podman exec` process died.
[NO TESTS NEEDED] because I don't really know how to test this
one.
Signed-off-by: Matthew Heon <mheon@redhat.com>
The checkpoint archive compression was hardcoded to `archive.Gzip`.
There have been requests to make the used compression algorithm
selectable. There was especially the request to not compress the
checkpoint archive to be able to create faster checkpoints when not
compressing it.
This also changes the default from `gzip` to `zstd`. This change should
not break anything as the restore code path automatically handles
whatever compression the user provides during restore.
Signed-off-by: Adrian Reber <areber@redhat.com>
We have race conditions where a container can be removed
by two different processes when running podman --remove rm.
It can be cleaned up in the API or by the conmon executing
podman container cleanup.
When we fail to remove a container that does not exists we should
not be printing errors or warnings, we should just debug the fact.
[NO TESTS NEEDED] Since this is a race condition it is difficult to
test.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Update containers common to the latest HEAD. Some bug fixes in libimage
forced us to have a clearer separation between ordinary images and
manifest lists. Hence, when looking up manifest lists without recursing
into any of their instances, we need to use `LookupManifestList()`.
Also account for some other changes in c/common (e.g., the changed order
in the security labels).
Further vendor the latest HEAD from Buildah which is required to get the
bud tests to pass.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
Fix a regression in `podman image prune` where unused images were
accidentally removed even when `--all=false`. Extend and partially
rewrite the e2e tests to make sure we're not regressing again in the
future.
Fixing the aforementioned issue revealed another issue in the default
prune filter. While prune should remove all "dangling" images (i.e.,
those without tag), it removed only "intermediate" ones; dangling images
without children. Remove the mistaken comment from the libimage
migration.
Also clarify the help message and man page.
Fixes: #10350
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Allow podman network reload to be run as rootless user. While it is
unlikely that the iptable rules are flushed inside the rootless cni
namespace, it could still happen. Also fix podman network reload --all
to ignore errors when a container does not have the bridge network mode,
e.g. slirp4netns.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
In the case of generate kube the auto-update labels will be converted into kube annotations and for play kube they will be converted back to labels since that's what podman understands
Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a new --mac-address flag to podman play kube. This is used to specify
a static MAC address which should be used for the pod. This option can be
specified several times because play kube can create more than one pod.
Fixes#9731
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
when deciding to create a user namespace, check for CAP_SYS_ADMIN
instead of looking at the euid.
[NO TESTS NEEDED] Needs nested Podman
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In libpod/image.Image.Remove(), if the attempt to find the image's
parent fails for any reason, log a warning and proceed as though it
didn't have one instead of failing, which would leave us unable to
remove the image without resetting everything.
In libpod/Runtime.RemoveImage(), if we can't determine if an image has
children, log a warning, and assume that it doesn't have any instead of
failing, which would leave us unable to remove the image without
resetting everything.
In pkg/domain/infra/abi.ImageEngine.Remove(), when attempting to remove
all images, if we encounter an error checking if a given image has
children, log a warning, and assume that it doesn't have any instead of
failing, which would leave us unable to remove the image without
resetting everything.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Add a new --ip flag to podman play kube. This is used to specify a
static IP address which should be used for the pod. This option can be
specified several times because play kube can create more than one pod.
Fixes#8442
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The --log-driver flag was silently ignored by podman play kube. This
regression got introduced during the play kube rework.
Unfortunately the test for this was skipped for no good reason.
Fixes#10015
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Add a new --rootless-cni option to podman unshare to also join the
rootless-cni network namespace. This is useful if you want to connect
to a rootless container via IP address. This is only possible from the
rootless-cni namespace and not from the host namespace. This option also
helps to debug problems in the rootless-cni namespace.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Podman has, for a long time, had an internal concept of
dependency management, used mainly to ensure that pod infra
containers are started before any other container in the pod. We
also have the ability to recursively start these dependencies,
which we use to ensure that `podman start` on a container in a
pod will not fail because the infra container is stopped. We have
not, however, exposed these via the command line until now.
Add a `--requires` flag to `podman run` and `podman create` to
allow users to manually specify dependency containers. These
containers must be running before the container will start. Also,
make recursive starting with `podman start` default so we can
start these containers and their dependencies easily.
Fixes#9250
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
