Update to the latest golangci-lint version. v1.46 added new linters.
I disabled nonamedreturns and exhaustruct since they enforce a certain
code style and using them would require big changes to the code base.
The nosprintfhostport is new and I fixed one problem in the tests. While
the test itself is fine because it uses ipv4 only the linter still looks
good because the sprintf use will fail for ipv6 addresses.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Commit 5fa6f686db added a regression which was fixed in eb71712626.
Apply the same fix again to prevent a panic and return a proper error
instead.
To not regress again I added a e2e test which makes sure we do not panic.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The nolintlint linter does not deny the use of `//nolint`
Instead it allows us to enforce a common nolint style:
- force that a linter name must be specified
- do not add a space between `//` and `nolint`
- make sure nolint is only used when there is actually a problem
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
if /run is on a volume do not create the file /run/.containerenv as it
would leak outside of the container.
Closes: https://github.com/containers/podman/issues/14577
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is an enhancement for the podman system prune feature.
In this issue, it is mentioned that 'network prune' should be
wired into 'podman system prune'
https://github.com/containers/podman/issues/8673
Therefore, I add the function to remove unused networks.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
command
Previously, if a container was not running, and the user ran the `podman
stats` command, an error would be reported: `Error: container state
improper`.
Podman now reports stats as the fields' default values for their
respective type if the container is not running:
```
$ podman stats --no-stream demo
ID NAME CPU % MEM USAGE / LIMIT MEM % NET IO BLOCK IO PIDS CPU TIME AVG CPU %
4b4bf8ce84ed demo 0.00% 0B / 0B 0.00% 0B / 0B 0B / 0B 0 0s 0.00%
```
Closes: #14498
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
implement podman pod clone, a command to create an exact copy of a pod while changing
certain config elements
current supported flags are:
--name change the pod name
--destroy remove the original pod
--start run the new pod on creation
and all infra-container related flags from podman pod create (namespaces etc)
resolves#12843
Signed-off-by: cdoern <cdoern@redhat.com>
I don't see a reason why we don't support --remove-signatures
from remote push, so adding support.
Fixes: https://github.com/containers/podman/issues/14558
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
this patch included additonal host namespace checks when creating a ctr as well
as fixing of the tests to check /proc/self/ns/net
see #14461
Signed-off-by: cdoern <cdoern@redhat.com>
infra was overriding options that it should be appending rather than resetting.
fix this by appending the given container's spec to the compatible options before marshaling/unmarshaling
resolves#14454
Signed-off-by: cdoern <cdoern@redhat.com>
Using `To(BeTrue()/BeFalse())` provides very bas error messages. It is not
clear to a log reader what went wrong. Using ContainsSubstring() make
the error message much more useful.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
If a privileged container is running, stops, and the devices on the host
change, such as a USB device is unplugged, then a container would no
longer start. Previously, the devices from the host were only being
added to the container once: when the container was created. Now, this
happens every time the container starts.
I did this by adding a boolean to the container config that indicates
whether to mount all of the devices or not, which can be set via an option.
During spec generation, if the `MountAllDevices` option is set in the
container config, all host devices are added to the container.
Additionally, a couple of functions from `pkg/specgen/generate/config_linux.go`
were moved into `pkg/util/utils_linux.go` as they were needed in
multiple packages.
Closes#13899
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Similar feature was added for named overlay volumes here: https://github.com/containers/podman/pull/12712
Following PR just mimics similar feature for anonymous volumes.
Often users want their anonymous overlayed volumes to be `non-volatile` in nature
that means that same `upper` dir can be re-used by one or more
containers but overall of nature of volumes still have to be overlay
so work done is still on a overlay not on the actual volume.
Following PR adds support for more advanced options i.e custom `workdir`
and `upperdir` for overlayed volumes. So that users can re-use `workdir`
and `upperdir` across new containers as well.
Usage
```console
podman run -it -v /some/path:/data:O,upperdir=/path/persistant/upper,workdir=/path/persistant/work alpine sh
```
Signed-off-by: Aditya R <arajan@redhat.com>
Setting the build context to a dedicated subdir makes sure that the test does not
flake when running in parallel, as the test is isolated from other tests
that may dump secrets in a higher level context dir.
This should have been done in
https://github.com/containers/podman/pull/13457, as this makes that PR
actually work.
Signed-off-by: Ashley Cui <acui@redhat.com>
The backend should not convert partial lines to full log lines. While
this works for most cases it cannot work when the last line is partial
since it will just be lost. The frontend logic can already display
partial lines correctly. The journald driver also works correctly since
it does not such conversion.
Fixes#14458
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Save at most three images and sort them by size. The test started to
flake as _all_ local images were saved which is not neccessary.
Fixes: #14468
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
the function `GetDefaultNamespaceMode` for pods checks if we are sharing each namespace
and if not, returns the default which in the case of a network is slirp.
add a switch case for explicitly checking if the pod's network mode is host
and if so, return specgen.Host for the container
resolves#13763
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
The test calls podman run -d followed by podman logs. There is no
guarantee the the container or conmon has written all its output.
Adding an extra podman wait should fix this.
Do not remove the -d to not print 1000 unnecessary lines in the logs.
Fixes#14362
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a container does not use the default podman netns, for example
--network none or --network ns:/path a restore would fail because the
specgen check validates that c.config.StaticMAC is nil but the
unmarshaller sets it to an empty slice.
While we could make the check use len() > 0 I feel like it is more
common to check with != nil for ip and mac addresses.
Adding omitempty tag makes the json marshal/unmarshal work correctly.
This should not cause any issues.
Fixes#14389
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Hardcoding the interface name is a bad idea. We have no control over the
actual interface name since the user can change it.
The correct thing is to read them from the network status. Since the
contianer can have more than one interface we have to add the RX/TX
values. The other values are currently not used.
For podman 5.0 we should change it so that the API can return the
statistics per interface and the client should sum the TX/RX for the
command output. This is what docker is doing.
Fixes#13824
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When the volume does not exist we should output an error stating so and
not some generic one.
Fixes#14411
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Buildah already supports using `--layers` with `--squash` after https://github.com/containers/buildah/pull/3674
if user wants to do so hence podman must honor similar configuration
in `--squash-all` behaviour if user wants to using cache.
PS: We cannot alter behaviour of `podman build --squash` for
docker-compat reasons hence this feature can be easily supported by
`--squash-all`.
Closes: https://github.com/containers/buildah/issues/4011
Signed-off-by: Aditya R <arajan@redhat.com>
Most of these are no longer relevant, just drop the comments.
Most notable change: allow `podman kill` on paused containers.
Works just fine when I test it.
Signed-off-by: Matthew Heon <mheon@redhat.com>
I am not 100% sure if this is actually causing the problem but I was
able to reproduce locally and this change fixed it there. Without the `-n`
option iptables tries to reverse lookup the ips to domain names. This is
extremely slow for unknown reasons. Given the large amount of iptables
entries due parallel test runs it will not succeed in the default 90 sec
timeout.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The init binary until now has been bind-mounted to /dev/init which
breaks when bind-mounting to /dev. Instead mount the init to
/run/podman-init. The reasoning for using /run is that it is already
used for other runtime data such as secrets.
Fixes: #14251
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
e2e tests tends to fail when running with multiple nodes because
the same device folder name is used accross all nodes
Signed-off-by: Cosmin Tupangiu <cosmin@redhat.com>
- add test
- fix bug when a character device set in a volume as a block device
is seen as block device in _pkg/specgen/generate/kube/volume.go_.
At this stage the type does not matter much because the devices are
recreated at lower layer but the bug allowed a CharDevice volume to be
passed to lower layer as a BlockDevice.
Signed-off-by: Cosmin Tupangiu <cosmin@redhat.com>
