* Add second go routine for when a Timer is not needed.
* goimports updated some project files
Fixes#5531
Signed-off-by: Jhon Honce <jhonce@redhat.com>
when building images, we can now add the os and arch of the image using overrides from the commandline. the commandline options set sane defaults so we use those as well.
Fixes: #5503
Signed-off-by: Brent Baude <bbaude@redhat.com>
the podman generated systemd service file has `Type=forking` service,
so the command after `ExecStart=` should not run in front.
if someone created a container and has the detach(`-d`) param missing
like this
```
podman create --name ngxdemo -P nginxdemos/hello
```
and generate the file with `--new` param:
```
podman generate systemd --name --new ngxdemo
```
because `podman run xxx` has no `-d` param,
so the container is not run in background and nerver exit.
and systemd will fail to start the service:
```
sudo systemctl start container-ngxdemo.service
Job for container-ngxdemo.service failed because a timeout was exceeded.
See "systemctl status container-ngxdemo.service" and "journalctl -xe" for details.
```
Signed-off-by: 荒野無燈 <ttys3@outlook.com>
Remove leading slashes from the run-dir paths. It was meant to make it
explicit that we're dealing with an absolute path but user feedback has
shown that most are aware. It also cleans up the path in the systemctl
status output.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This introduces a new cirrus helper script, logformatter.
Usage is:
[commands...] | logformatter TEST-NAME
It reformats its input into a readable, highlighed, linkable
form. Some features:
- boring stuff (timestamps, standard podman options) is
deemphasized
- important stuff (warnings, errors) is emphasized
- in-page links to the actual failures
- active links to source files
- jumps to bottom of page on load, because that's where
the errors are. (All errors are linked)
Add it to select test commands (integration, system) and
add a new artifacts_html, run in the 'always' block, which
uploads generated *.log.html into Cirrus; from there we
generate a live URL that can be viewed in browser.
Unfortunately, due to security concerns in Cirrus, it is
not currently possible to make the link a live one.
Kludge: add a line of dashes after Restoring images; without this,
the first test ("systemd PID 1") has no dashes before it, so
logformatter doesn't see it.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This patch allows users to specify the list of capabilities required
to run their container image.
Setting a image/container label "io.containers.capabilities=setuid,setgid"
tells podman that the contained image should work fine with just these two
capabilties, instead of running with the default capabilities, podman will
launch the container with just these capabilties.
If the user or image specified capabilities that are not in the default set,
the container will print an error message and will continue to run with the
default capabilities.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This corrects a regression from Podman 1.4.x where container exec
sessions inherited supplemental groups from the container, iff
the exec session did not specify a user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
instead of searching the fedora registry which is error prone, we instead search a local registry for the empty set search.
when running two containers with the same IP, i suspect the first container has not fully gotten its ip information back from cni when the second container fires. rework this test such that we use nginx to make sure the container is up and running before continues which should pace the subsequent test.
Signed-off-by: Brent Baude <bbaude@redhat.com>
When inspecting containers, info on CNI networks added to the
container by name (e.g. --net=name1) should be displayed
separately from the configuration of the default network, in a
separate map called Networks.
This patch adds this separation, improving our Docker
compatibility and also adding the ability to see if a container
has more than one IPv4 and IPv6 address and more than one MAC
address.
Fixes#4907
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Sometime between 10th and 23rd of Feb. 2020, the behavior of crun
changed. Upon consulting with Giuseppe, the podman run tests for
`device-read-*` and `device-write-*` do not depend on the container
output for success, only the exit code. Add a comment and conditional
regarding this in case of cgroupsv2. Also noted that these tests
will likely require future refactoring/simplification.
Signed-off-by: Chris Evich <cevich@redhat.com>
Now support --no-healthcheck option to disable defined healthchecks in a container image. --health-cmd=none remains supported as well.
Fixes: #5299
Signed-off-by: Brent Baude <bbaude@redhat.com>
The "create two containers with the same IP" test failed:
https://api.cirrus-ci.com/v1/task/5992323062431744/logs/integration_test.log#t--Podman-create-two-containers-with-the-same-IP
...
(basically, expected error exit code, got 0)
Analysis: the sequence is 'start test1, start test2'. Perhaps it's
possible that 'podman start' exits before the test1 container has
an IP address assigned? There are no checks in the test, so it's
impossible to know what happened.
Solution: add a wait-loop invoking 'podman inspect', waiting
for a nonempty IP address on test 1; then assert that it's
what we expect it to be.
Signed-off-by: Ed Santiago <santiago@redhat.com>
...to try to compensate for flaky host.
registry.fedoraproject.org is just not reliable. It's flaking
with 503 errors, causing massive amounts of wasted CI time
and developer effort.
There is exactly one instance of that registry in these tests.
We can't replace it with quay.io, because "search quay.io/"
(trailing slash) fails with some sort of authentication error.
So let's just try a sleep/retry cycle instead.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Enables most of the network-related functionality from
`podman run` in `podman pod create`. Custom CNI networks can be
specified, host networking is supported, DNS options can be
configured.
Also enables host networking in `podman play kube`.
Fixes#2808Fixes#3837Fixes#4432Fixes#4718Fixes#4770
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
fix#5146
Insted of using a registry as mandatory parameter, this path allows podman to use the first registry from registries.conf.
Signed-off-by: Qi Wang <qiwan@redhat.com>
We use filepath.Clean() to remove trailing slashes to ensure that
when we supercede image mounts with mounts from --volume and
--mount, paths are consistent when we compare. Unfortunately,
while we used the cleaned path for the destination in the mount,
it was accidentally not used to index the maps that we use to
identify what to supercede, so our comparisons might be thrown
off by trailing slashes and similar.
Fixes#5219
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We attempted to share all logic for parsing labels and
environment variables, which on the surface makes lots of sense
(both are formatted key=value so parsing logic should be
identical) but has begun to fall apart now that we have added
additional logic to environment variable handling. Environment
variables that are unset, for example, are looked up against
environment variables set for the process. We don't want this for
labels, so we have to split parsing logic.
Fixes#3854
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The changes in #5075 turn out to be too aggressive; we should
only be setting --all if a status= filter is given. Otherwise
only running containers are filtered.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
fix#4876
Add `--device-cgroup-rule` to podman create and run. This enables to add device rules after the container has been created.
Signed-off-by: Qi Wang <qiwan@redhat.com>
When Docker performs a copy up, it first verifies that the volume
being copied into is empty; thus, for volumes that have been
modified elsewhere (e.g. manually copying into then), the copy up
will not be performed at all. Duplicate this behavior in Podman
by checking if the volume is empty before copying.
Furthermore, move setting copyup to false further up. This will
prevent a potential race where copy up could happen more than
once if Podman was killed after some files had been copied but
before the DB was updated.
This resolves CVE-2020-1726.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The validation logic was failing on properly-formatted changes.
There's already validation in Commit itself, so no need to
duplicate.
Fixes#5148
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This patch lets valid values of --format be compatible with docker. Replace CreatedTime with CreatedAt, Created with CreatedSince.
Keep CreatedTime and Created are valid as hidden options.
Signed-off-by: Qi Wang <qiwan@redhat.com>
When we filter, it should be out of all containers, not just
running ones, by default - this is necessary to ensure Docker
compatability.
Fixes#5050
Signed-off-by: Matthew Heon <mheon@redhat.com>
On F31 CI tests, we have uncovered several failing tests as rootless that need to be fixed. For the interim, we are going to disable those tests. Issue #5006 has been created to track and complete this.
Signed-off-by: Brent Baude <bbaude@redhat.com>
When a container specification has a pull policy, we should honor it when recreating the pods/containers from yaml. furthermore, ini kube, if a tag is :latest, then the always pull policy is automatically instituted.
Fixes: #4880
Signed-off-by: Brent Baude <bbaude@redhat.com>
when a docker image has a defined healthcheck, it should be displayed with inspect. this is only valid for docker images as oci images are not aware of healthchecks.
Fixes: #4799
Signed-off-by: Brent Baude <bbaude@redhat.com>
Move the seccomp profile from a manifest annotation to a config label.
This way, we can support it for Docker images as well and provide an
easy way to add that data via Dockerfiles.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
