When defining multiple ports (same src/dst) like `-p 80:80 -p 443:443`
then podman will not show the complete output on `podman ps` (only
`0.0.0.0:80->80/tcp` in the example). This also applies to port ranges.
This patch refactors the port loop by pre-checking for ranges and
displaying them correctly to the end user.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
These options are now fully supported in the remote API and should no
longer be hidden and/or documented as non supported.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
External containers are containers created outside of Podman.
For example Buildah and CRI-O Containers.
$ buildah from alpine
alpine-working-container
$ buildah run alpine-working-container touch /test
$ podman container exists --external alpine-working-container
$ podman container diff alpine-working-container
C /etc
A /test
Added --external flag to refer to external containers, rather then --storage.
Added --external for podman container exists and modified podman ps to use
--external rather then --storage. It was felt that --storage would confuse
the user into thinking about changing the storage driver or options.
--storage is still supported through the use of aliases.
Finally podman contianer diff, does not require the --external flag, since it
there is little change of users making the mistake, and would just be a pain
for the user to remember the flag.
podman container exists --external is required because it could fool scripts
that rely on the existance of a Podman container, and there is a potential
for a partial deletion of a container, which could mess up existing users.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* system df
* events
* fix error handling from go routine
* update tests to use gomega matchers for better error messages
* system info
* version
* volume inspect
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Currenly if a user specifies the name or ID of an external storage
container, we report an error to them.
buildah from scratch
working-container-2
podman rm working-container-2
Error: no container with name or ID working-container-2 found: no such container
Since the user specified the correct name and the container is in storage we
force them to specify --storage to remove it. This is a bad experience for the
user.
This change will just remove the container from storage. If the container
is known by libpod, it will remove the container from libpod as well.
The podman rm --storage option has been deprecated, and removed from docs.
Also cleaned documented options that are not available to podman-remote.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* --format "table {{.field..." will print fields out in a table with
headings. Table keyword is removed, spaces between fields are
converted to tabs
* Update parse.MatchesJSONFormat()'s regex to be more inclusive
* Add report.Headers(), obtain all the field names to be used as
column headers, a map of field name to column headers may be provided
to override the field names
* Update several commands to use new functions
Signed-off-by: Jhon Honce <jhonce@redhat.com>
In podman containers rm and podman images rm, the commands
exit with error code 1 if the object does not exists.
This PR implements similar functionality to volumes, networks, and Pods.
Similarly if volumes or Networks are in use by other containers, and return
exit code 2.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently the --pull missing|always|never is ignored
This PR implements this for local API. For remote we
need to default to pullpolicy specified in the containers.conf
file.
Also fixed an issue when images were matching other images names
based on prefix, causing images to always be pulled.
I had named an image myfedora and when ever I pulled fedora, the system
thought that it there were two images named fedora since it was checking
for the name fedora as well as the prefix fedora. I changed it to check
for fedora and the prefix /fedora, to prefent failures like I had.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Have a clear separation of concerns for the CLI-only options (and their
logic) from the backend. The backend logic is now easier to understand
(e.g., `stream` instead of `noStream`).
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Refactor the entities' stats API to simplify using it and reduce the
risk of running into concurrency issues at the call sites. Further
simplify the stats code by de-spaghetti-ing the logic and reducing
duplicate code.
`ContainerStats` now returns a data channel and an error. If the error
is nil, callers can read from the channel.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Enables podman create, pull, run, import to use --signature-policy option. Set it as hidden flag to be consistent with other commands.
Signed-off-by: Qi Wang <qiwan@redhat.com>
PR #7633 disallowed "-l" (--latest) with container args.
PR #7630 made changes to the "podman wait" command. The error
message it issues is inconsistent (and incompatible) with
the one required by the new BATS --help test. Fix that.
This is entirely my fault. I was aware of #7630, and I was
careful to check the output message format, but I was not
careful enough (I trusted my eyes, not my code).
Signed-off-by: Ed Santiago <santiago@redhat.com>
Record the user-specified "raw" image name in the SpecGenerator, so we
can pass it along to the config when creating a container. We need a
separate field as the image name in the generator may be set to the
ID of the previously pulled image - ultimately the cause of #7404.
Reverting the image name from the ID to the user input would not work
since "alpine" for pulling iterates over the search registries in the
registries.conf but looking up "alpine" normalizes to
"localhost/alpine".
Recording the raw-image name directly in the generator was the best of
the options I considered as no hidden magic from search registries or
normalizations (that may or may not change in the future) can interfere.
The auto-update backend enforces that the raw-image name is a
fully-qualified reference, so we need to worry about that in the front
end.
Fixes: #7407
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add new system check confirming that "podman foo -l arg"
throws an error; and fix lots of instances where code
was not doing this check.
I'll probably need to add something similar for --all but
that can wait.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Since --pull is deprecated, remove it from help and hide if from --help
Also set it to true by default.
Share image pull code betweern podman image pull and podman container runlabel.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877181
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The `podman ps --all` command will now show containers that
are under the control of other c/storage container systems and
the new `ps --storage` option will show only containers that are
in c/storage but are not controlled by libpod.
In the below examples, the '*working-container' entries were created
by Buildah.
```
podman ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9257ef8c786c docker.io/library/busybox:latest ls /etc 8 hours ago Exited (0) 8 hours ago gifted_jang
d302c81856da docker.io/library/busybox:latest buildah 30 hours ago storage busybox-working-container
7a5a7b099d33 localhost/tom:latest ls -alF 30 hours ago Exited (0) 30 hours ago hopeful_hellman
01d601fca090 localhost/tom:latest ls -alf 30 hours ago Exited (1) 30 hours ago determined_panini
ee58f429ff26 localhost/tom:latest buildah 33 hours ago storage alpine-working-container
podman ps --external
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
d302c81856da docker.io/library/busybox:latest buildah 30 hours ago external busybox-working-container
ee58f429ff26 localhost/tom:latest buildah 33 hours ago external alpine-working-container
```
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fixes: 4c75fe3f70 ("fix pod creation with "new:" syntax")
Commit 4c75fe3f70 passes all net options to the pod but forgot
to unset the options for the container creation. This leads to
erros when using flags like `--ip` since we tried setting
the ip on the pod and container which obviously fails.
I didn't notice the bug because we don't throw an error when
specifing port bindings on a container which joins the pods
network namespace. (#7373)
Also allow the use of `--hostname` and pass that option to the
pod and unset it for the container. The container has to use
the pods hostname anyway. This would error otherwise.
Added tests to prevent regression.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When you execute podman create/run with the --pod new:<name> syntax
the pod was created but the namespaces where not shared and
therefore containers could not communicate over localhost.
Add the default namespaces and pass the network options to the
pod create options.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
For some reason we were overwriting memory when handling both
--pid=host and --ipc=host. Simplified the code to handle this
correctly, and add test to make sure it does not happen again.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We should default to the user name unmount rather then the internal
name of umount.
Also User namespace was not being handled correctly. We want to inform
the user that if they do a mount when in rootless mode that they have
to be first in the podman unshare state.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Somewhere in the Podman v2 rewrite, we allowed
`podman start --attach` to print the container ID of the started
container after exiting from the attach session (via detach key
or the container exiting naturally). We should never print the ID
when `--attach` is given, which makes the fix simple - make the
print statement conditional on `--attach` not being present.
Wierdly, this only happened with `--interactive` was given to
`podman start`. I don't know why that is, but this resolves the
issue without having to dig any deeper, so I'm content.
Fixes#7055
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
