Add --creds flag to podman create and podman run commands to support
registry authentication during image pulling.
Without this flag, users must perform a separate `podman pull
--creds/--cert-dir` first and then remember to specify `--pull=never`.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Allow users to target the most recently created container with
`podman update --latest` (short `-l`). The same option already exists
on many other commands, so this brings update in line with the rest of
the CLI and saves users from typing or looking up the newest container.
Fixes: #26380
Signed-off-by: Hayato Kihara <kai.21banana@gmail.com>
If the --health-cmd flag is not specified, other flags such as --health-interval, --health-timeout, --health-retries, and --health-start-period are ignored if the image contains a Healthcheck. This makes it impossible to modify these Healthcheck configuration when a container is created.
Fixes: https://github.com/containers/podman/issues/20212
Fixes: https://issues.redhat.com/browse/RUN-2629
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
This was added by commit 84e42877a ("make lint: re-enable revive"),
making nolintlint became almost useless.
Remove the ungodly amount of unused nolint annotations.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
this is just a few bytes of escape codes, there is no need to depend on
a library for it. While it is not a big one it still seems better to
just write it ourselves.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Do not use the interspersed option for logs, it is not needed and just
restricts valid use cases.
Fixes#25653
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The --env is used to add new environment variable to container or
override the existing one. The --unsetenv is used to remove
the environment variable.
It is done by sharing "env" and "unsetenv" flags between both
"update" and "create" commands and later handling these flags
in the "update" command handler.
The list of environment variables to add/remove is stored
in newly added variables in the ContainerUpdateOptions.
The Container.Update API call is refactored to take
the ContainerUpdateOptions as an input to limit the number of its
arguments.
The Env and UnsetEnv lists are later handled using the envLib
package and the Container is updated.
The remote API is also extended to handle Env and EnvUnset.
Fixes: #24875
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Since commit c25cc7230 ("Allow a value of -1 to set unlimited pids
limit") podman converts the pids-limit value of -1 to 0 for OCI spec.
Unfortunately, different runtimes (crun and runc) treat pids.limit=0
differently, and the runtime-spec definition is somewhat vague
(see [1]).
Long term fix belongs to runtime-spec and then runtimes should follow
it.
Short term fix is do not convert -1 to 0 (as all runtimes treat -1 as
unlimited).
[NO NEW TESTS NEEDED] -- this is covered by test added in commit 553e53d44.
Fixes: https://issues.redhat.com/browse/RHEL-80973
[1]: https://github.com/opencontainers/runc/issues/4014#issuecomment-1888185352
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The PodmanOptionsKey is never used anywhere so it is pointless to add
this. Second having several functions to return the same context makes
no sense so fold them all into one. Lastly create the context once and
always return the same one instead of having to nil check each time.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This should be set only by podman as it is used for the podman generate
systemd --new command. For the api it was set to the system service
command which is simply pointless. It must be empty in these cases.
Fixes#25026
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Add --hosts-file flag to container create, container run and pod create
* Add HostsFile field to pod inspect and container inspect results
* Test BaseHostsFile config in containers.conf
Signed-off-by: Gavin Lam <gavin.oss@tutamail.com>
New flags in a `podman update` can change the configuration of HealthCheck when the container is started, without having to restart or recreate the container.
This can help determine why a given container suddenly started failing HealthCheck without interfering with the services it provides. For example, reconfigure HealthCheck to keep logs longer than the usual last X results, store logs to other destinations, etc.
Fixes: https://issues.redhat.com/browse/RHEL-60561
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Clarifies the behavior of --interactive in both attached and unattached
scenarios.
Adds a caveat and explanation for --interactive being hungry as
described in https://github.com/containers/podman/issues/24370.
Signed-off-by: Alicia Boya García <aboya@igalia.com>
This fixes two problems, first if a port is published and exposed it
should not be shown twice. It is enough to show the published one.
Second, if there is a huge range the ports were no grouped causing the
output to be unreadable basically. Now we group exposed ports like we do
with the normal published ports.
Fixes#23317
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This can never included a comma in the protocol so it just complicated
things for no reason, we never needed this and commit edc3dc5e11 already
ensures this cannot happen.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The podman container cleanup process runs asynchronous and by the time
it gets the lock it is possible another podman process already did the
cleanup and then did a new init() to start it again. If the cleanup
process gets the lock there it will cause very weird things.
This can be observed in the remote start API as CI flakes.
Fixes#23754
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we use passthrough logging and the --rmi option should not try to
delete the image right away. Simply speak passthough only means do not
print the cotnainer id but we should never try to delete the image here
as this will be done in the cleanup process.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Since commit 458ba5a8af the cleanup process now removes the image as
well, thus the removal is racy and it will cause an error here.
The code tried to ignore the error with errors.Is() but this never works
across the remote API. However the API already has a ignore option so
juts use that and fix the error message so that we can easily find the
root cause and I do not have to guess where the log was written.
Fixes#23719
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This started off as an attempt to make `podman stop` on a
container started with `--rm` actually remove the container,
instead of just cleaning it up and waiting for the cleanup
process to finish the removal.
In the process, I realized that `podman run --rmi` was rather
broken. It was only done as part of the Podman CLI, not the
cleanup process (meaning it only worked with attached containers)
and the way it was wired meant that I was fairly confident that
it wouldn't work if I did a `podman stop` on an attached
container run with `--rmi`. I rewired it to use the same
mechanism that `podman run --rm` uses, so it should be a lot more
durable now, and I also wired it into `podman inspect` so you can
tell that a container will remove its image.
Tests have been added for the changes to `podman run --rmi`. No
tests for `stop` on a `run --rm` container as that would be racy.
Fixes#22852
Fixes RHEL-39513
Signed-off-by: Matt Heon <mheon@redhat.com>
The new golangci-lint version 1.60.1 has problems with typecheck when
linting remote files. We have certain pakcages that should never be
inlcuded in remote but the typecheck tries to compile all of them but
this never works and it seems to ignore the exclude files we gave it.
To fix this the proper way is to mark all packages we only use locally
with !remote tags. This is a bit ugly but more correct. I also moved the
DecodeChanges() code around as it is called from the client so the
handles package which should only be remote doesn't really fit anyway.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is something Docker does, and we did not do until now. Most
difficult/annoying part was the REST API, where I did not really
want to modify the struct being sent, so I made the new restart
policy parameters query parameters instead.
Testing was also a bit annoying, because testing restart policy
always is.
Signed-off-by: Matt Heon <mheon@redhat.com>
Docker shows exposed ports as just PORT/PROTO so match that behavior. It
is not clear to me why someone needs that information in ps as "expose"
doesn't effect anything networking related.
Fixes https://issues.redhat.com/browse/RHEL-32154
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we remove with --force we do not return a error if the input does
not exists, however if we get more than on input we must try to remove
all and not just NOP out and not remove anything just because one arg
did not exists.
Also make the code simpler for commands that do have the --ignore option
and just make --force imply --ignore which reduces the ugly error
handling.
Fixes#21529
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
