Using golang.org/x/tools/gopls/internal/analysis/modernize/cmd/modernize
+ some manual cleanup in libpod/lock/shm/shm_lock_test.go as it
generated an unused variable
+ restored one removed comment
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There are three copies of them, and already a shared utility, so
also define the options in a single place.
This will make it easier to add more options, and it reduces the risk
of incorrectly ordering the parameters to PrepareSigning.
Should not change behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Add --creds flag to podman create and podman run commands to support
registry authentication during image pulling.
Without this flag, users must perform a separate `podman pull
--creds/--cert-dir` first and then remember to specify `--pull=never`.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The "compat-volumes" setting shouldn't be provided by the compat build
endpoint, the docker daemon's isn't expected to recognize it.
It is also a conditional boolean flag, so if it isn't specified by the
caller, don't send a value from a client to the server, so that the
server will be able to apply its own default.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Wire up the source-date-epoch, rewrite-timestamp, and created-annotation
flags so that a client can correctly ask a server to honor them.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
podman's logic to parse excludes from `--ignorefile` is not consistent
with buildah, use code directly from imagebuilder.
Closes: https://github.com/containers/podman/issues/25746
Signed-off-by: flouthoc <flouthoc.git@gmail.com>
Previously, the HealthCheck exec session would not terminate on timeout, allowing the healthcheck to run indefinitely.
Fixes: https://issues.redhat.com/browse/RHEL-86096
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add the inherit-labels option to the build API and tweak the go.mod
after some unhappiness in my sandbox.
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
If the --health-cmd flag is not specified, other flags such as --health-interval, --health-timeout, --health-retries, and --health-start-period are ignored if the image contains a Healthcheck. This makes it impossible to modify these Healthcheck configuration when a container is created.
Fixes: https://github.com/containers/podman/issues/20212
Fixes: https://issues.redhat.com/browse/RUN-2629
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
this is just a few bytes of escape codes, there is no need to depend on
a library for it. While it is not a big one it still seems better to
just write it ourselves.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The --env is used to add new environment variable to container or
override the existing one. The --unsetenv is used to remove
the environment variable.
It is done by sharing "env" and "unsetenv" flags between both
"update" and "create" commands and later handling these flags
in the "update" command handler.
The list of environment variables to add/remove is stored
in newly added variables in the ContainerUpdateOptions.
The Container.Update API call is refactored to take
the ContainerUpdateOptions as an input to limit the number of its
arguments.
The Env and UnsetEnv lists are later handled using the envLib
package and the Container is updated.
The remote API is also extended to handle Env and EnvUnset.
Fixes: #24875
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This commit adds the "secret" Event type and emits
"create" and "remove" events for this Event type
when Secret is created or removed.
This can be used for example by podman interfaces to
view and manage secrets.
Fixes: #24030
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
The PodmanOptionsKey is never used anywhere so it is pointless to add
this. Second having several functions to return the same context makes
no sense so fold them all into one. Lastly create the context once and
always return the same one instead of having to nil check each time.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
the podman artifact verb is used to manage OCI artifacts. the following
verbs were added to `podman artifact`:
* add
* inspect
* ls
* pull
* push
* rm
Notable items with this PR:
* all artifact commands and their output are subject to change. i.e.
consider all of this tech preview
* there is no way to add a file to an artifact that already exists in
the store. you would need to delete and recreate the artifact.
* all references to artifacts names should be fully qualified names in
the form of repo/name:tag (i.e. quay.io/artifact/foobar:latest)
* i understand that we will likely want to be able to attribute things
like arch, etc to artifact files. this function is not available yet.
Many thanks to Paul Holzinger for autocompletion PRs and review PRs that
fixed issues early on.
Also fix up some Args function to specify the correct number of args.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Signed-off-by: Brent Baude <bbaude@redhat.com>
Fixes: https://github.com/containers/podman/issues/25002
Also add the ability to inspect containers for
UseImageHosts and UseImageHostname.
Finally fixed some bugs in handling of --no-hosts for Pods,
which I descovered.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Found in debian testing where by default there are no unqualified search
registries installed. As such the test failed as the FIXME said. Now
there is no need for the test to assume anything.
Instead set our own config via CONTAINERS_REGISTRIES_CONF then we can
do exact matches, except that env was not read in the shell completion
code so move some code around to make it read the var in the same way as
podman login/logout.
Signed-off-by: Paul Holzinger <git@holzinger.dev>
* Add --hosts-file flag to container create, container run and pod create
* Add HostsFile field to pod inspect and container inspect results
* Test BaseHostsFile config in containers.conf
Signed-off-by: Gavin Lam <gavin.oss@tutamail.com>
New flags in a `podman update` can change the configuration of HealthCheck when the container is started, without having to restart or recreate the container.
This can help determine why a given container suddenly started failing HealthCheck without interfering with the services it provides. For example, reconfigure HealthCheck to keep logs longer than the usual last X results, store logs to other destinations, etc.
Fixes: https://issues.redhat.com/browse/RHEL-60561
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
- fix issues found by recvcheck
- skip k8s files from recvcheck
- remove two removed linters gomnd and execinquery
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Clarifies the behavior of --interactive in both attached and unattached
scenarios.
Adds a caveat and explanation for --interactive being hungry as
described in https://github.com/containers/podman/issues/24370.
Signed-off-by: Alicia Boya García <aboya@igalia.com>
This commit was automatically cherry-picked
by buildah-vendor-treadmill v0.3
from the buildah vendor treadmill PR, #13808
* Fix conflict caused by Ed's local-registry PR in buildah
* Wire in "new" --retry and --retry-delay, these existed for longer
but where non functional.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
These flags can affect the output of the HealtCheck log. Currently, when a container is configured with HealthCheck, the output from the HealthCheck command is only logged to the container status file, which is accessible via `podman inspect`.
It is also limited to the last five executions and the first 500 characters per execution.
This makes debugging past problems very difficult, since the only information available about the failure of the HealthCheck command is the generic `healthcheck service failed` record.
- The `--health-log-destination` flag sets the destination of the HealthCheck log.
- `none`: (default behavior) `HealthCheckResults` are stored in overlay containers. (For example: `$runroot/healthcheck.log`)
- `directory`: creates a log file named `<container-ID>-healthcheck.log` with JSON `HealthCheckResults` in the specified directory.
- `events_logger`: The log will be written with logging mechanism set by events_loggeri. It also saves the log to a default directory, for performance on a system with a large number of logs.
- The `--health-max-log-count` flag sets the maximum number of attempts in the HealthCheck log file.
- A value of `0` indicates an infinite number of attempts in the log file.
- The default value is `5` attempts in the log file.
- The `--health-max-log-size` flag sets the maximum length of the log stored.
- A value of `0` indicates an infinite log length.
- The default value is `500` log characters.
Add --health-max-log-count flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-max-log-size flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-log-destination flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
* podman manifest remove doesn't accept references as descriptions of
what to remove from a list or index; only use digests in the man page
* podman manifest remove only removes one thing at a time; correct the
man page examples
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
When the user specifies a Containerfile or Dockfile with the -f flag in podman build, if the file does not exist, the error should be intuitive to the user.
Fixed: #22940
Signed-off-by: Kevin Cui <bh@bugs.cc>
The pod was set after we checked the namespace and the namespace code
only checked the --pod flag but didn't consider --pod-id-file option.
As such fix the check to first set the pod option on the spec then use
that for the namespace. Also make sure we always use an empty default
otherwise it would be impossible in the backend to know if a user
requested a specific userns or not, i.e. even in case of a set
PODMAN_USERNS env a container should still get the userns from the pod
and not use the var in this case. Therefore unset it from the default
cli value.
There are more issues here around --pod-id-file and cli validation that
does not consider the option as conflicting with --userns like --pod
does but I decided to fix the bug at hand and don't try to fix the
entire mess which most likely would take days.
Fixes#22931
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is the same as what --squash-all is doing, and we already support
--squash with --layers=true since this is the default.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The expectation with --cgroups=disabled is that the current cgroup is
used by the container.
Currently the --cgroups=disabled is passed directly to the OCI
runtime, but it doesn't stop Podman from creating a new cgroup when it
doesn't own the current one.
Closes: https://github.com/containers/podman/issues/20910
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is something Docker does, and we did not do until now. Most
difficult/annoying part was the REST API, where I did not really
want to modify the struct being sent, so I made the new restart
policy parameters query parameters instead.
Testing was also a bit annoying, because testing restart policy
always is.
Signed-off-by: Matt Heon <mheon@redhat.com>
The logic here is more complex than I would like, largely due to
the behavior of `podman inspect` for running containers. When a
container is running, `podman inspect` will source as much as
possible from the OCI spec used to run that container, to grab
up-to-date information on things like devices. We don't want to
change this, it's definitely the right behavior, but it does make
updating a running container inconvenient: we have to rewrite the
OCI spec as part of the update to make sure that `podman inspect`
will read the correct resource limits.
Also, make update emit events. Docker does it, we should as well.
Signed-off-by: Matt Heon <mheon@redhat.com>
Follow up to 493179be45 which only fixed the issue on the server despite
me trying to fix it on the client as well, with this change here we
always correctly unset the default on the remote client as the
root/rootless status will be wrong.
This means it is enough for users to either have a new server or client
with the bug fix which should make the update process easier.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I am really not sure why the caller even should have the option to set
this. We should always use the correct isolation type based on the
privileges the server runs under never the client. podman-remote build
seems to send the default based on its local privs which was wrong as
well. To fix this I also changed the client to send the default if the
isolation flag is not set.
Fixes#22109
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Commit 03f6589f3 added basic support for pull-error event from libimage
but it contains several problems:
1. storing the error as error type prevents it from being unmarshalled,
thus change it to a string
2. the error was never propagated from the libimage event to the podman
event struct
3. the error message was not wired into the cli and API
This commit fixes these problems.
Fixes#21458
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
