[NO TESTS NEEDED] This PR is mainly documentation and some code cleanup.
Also cleanup and consolidate handling of other hanlding of podman-remote
hidden options.
Fixes: https://github.com/containers/podman/issues/9874
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For commands that use the golang template library directly add the
compatible template functions
[NO TESTS NEEDED]
Fixes#8773
Signed-off-by: Jhon Honce <jhonce@redhat.com>
If we're logging at trace level, use %+v instead of %v when printing an
error at exit. If the error included stack information, this will cause
the backtrace to be printed, which is very handy for debugging.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
"trace" is a valid logrus debugging level, so we should be able to tell
the library to display messages logged at that level.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Currently podman only works with --isolation chroot. This PR
fixes this by allowing the isolation mode to default to OCI and to
also allow users to pass the isolation mode into the containers.
The current tests for --isolation should cause this code to be tested.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If you are attempting to run a container in interactive mode, and want
a --tty, then there must be a terminal in use.
Docker exits right away when a user specifies to use a --interactive and
--TTY but the stdin is not a tty.
Currently podman will pull the image and then fail much later.
Podman will continue to run but will print an warning message.
Discussion in : https://github.com/containers/podman/issues/8916
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently pull policy is set incorrectly when users set --pull-never.
Also pull-policy is not being translated correctly when using
podman-remote.
Fixes: #9573
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
<MH: Fixed cherry-pick conflict>
Signed-off-by: Matthew Heon <mheon@redhat.com>
User message was the same as in the case of no flag provided.
This commit aligns message with the one used in docker.
[NO TESTS NEEDED]
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
Some packages used by the remote client imported the libpod package.
This is not wanted because it adds unnecessary bloat to the client and
also causes problems with platform specific code(linux only), see #9710.
The solution is to move the used functions/variables into extra packages
which do not import libpod.
This change shrinks the remote client size more than 6MB compared to the
current master.
[NO TESTS NEEDED]
I have no idea how to test this properly but with #9710 the cross
compile should fail.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The `libpod/network` package should only be used on the backend and not the
client. The client used this package only for two functions so move them
into a new `pkg/network` package.
This is needed so we can put linux only code into `libpod/network`, see #9710.
[NO TESTS NEEDED]
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Copy is full of perils. Some of them are the nuances when copying
directories. Who would have thought that
* cp dir foo
* cp dir/ foo
* cp dir/. foo
are all supposed to yield the same result when foo does not exist.
`podman cp` now supports all three notations, which required to massage
the front-end code in `cmd/podman` a bit. The tests have been extended
and partially rewritten to test container->host and host->container
copy operations.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Remove --volume option from podman-remote since it is
not supported, also add information to podman-build man page
indicating options not supported over remote connections.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The --trace has helped in early stages analyze Podman code. However,
it's contributing to dependency and binary bloat. The standard go
tooling can also help in profiling, so let's turn `--trace` into a NOP.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The NanoCpus field in HostConfig was not wired up. It conflicts
with CPU period and quota (it hard-codes period to a specific
value and then sets the user-specified value as Quota).
Fixes#9523
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Traditionally, the path resolution for containers has been resolved on
the *host*; relative to the container's mount point or relative to
specified bind mounts or volumes.
While this works nicely for non-running containers, it poses a problem
for running ones. In that case, certain kinds of mounts (e.g., tmpfs)
will not resolve correctly. A tmpfs is held in memory and hence cannot
be resolved relatively to the container's mount point. A copy operation
will succeed but the data will not show up inside the container.
To support these kinds of mounts, we need to join the *running*
container's mount namespace (and PID namespace) when copying.
Note that this change implies moving the copy and stat logic into
`libpod` since we need to keep the container locked to avoid race
conditions. The immediate benefit is that all logic is now inside
`libpod`; the code isn't scattered anymore.
Further note that Docker does not support copying to tmpfs mounts.
Tests have been extended to cover *both* path resolutions for running
and created containers. New tests have been added to exercise the
tmpfs-mount case.
For the record: Some tests could be improved by using `start -a` instead
of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI
which forced me to use the more expensive start-exec option.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
It took a lot to figure out exactly how this should work, but I
think I finally have it. My initial versions of this created the
directory with the same owner as the user the container was run
with, which was rather complicated - but after review against
Docker, I have determined that is incorrect, and it's always made
as root:root 0755 (Ubuntu's Docker, which I was using to try and
test, is a snap - and as such it was sandboxed, and not actually
placing directories it made in a place I could find?). This makes
things much easier, since I just need to parse out source
directories for binds and ensure they exist.
Fixes#9510
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently podman is ignoreing the build --timestamp flag.
This PR fixes this for local and remote clients.
Fixes: https://github.com/containers/podman/issues/9569
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Since we have no good way to enable this on the server side, we will
just allow it to be set on the client side. This should solve almost all
cases.
Partially fixes: https://github.com/containers/podman/issues/9500
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Create is not formatted as `key=value` but rather `key:value`
(technically `path:option1,option2`). As such we can't use the
stringMapToArray function, and instead need to generate it
manually.
Fixes#9511
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Added ID to default
removed outdated imports
slight refactor
Test Network Headers added to network_test.go
Signed-off-by: Parker Van Roy <pvanroy@redhat.com>
/dev/stdin should not be treated as "-" to remain compatible with Docker
and to have a more consistent and idiomatic interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
/dev/stdout should not be treated as "-" to remain compatible with
Docker and to have a more consistent and idiomatic interface.
Fixes: #9362
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure to treat "." and "/." correctly. Both cases imply to copy the
contents of a directory in contrast to the directory. This implies to
unset the KeepDirectoryNames options of the copiah package.
Previously, the code was performing a simple string suffix check which
is not enough since it would match files and directories ending with
".".
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman -s crashes when the user specifies the '{{ .Size }}` format
on the podman ps command, without specifying the --size option.
This PR will stop the crash and print out a logrus.Error stating that
the caller should add the --size option.
Fixes: https://github.com/containers/podman/issues/9408
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
