For systems that have extreme robustness requirements (edge devices,
particularly those in difficult to access environments), it is important
that applications continue running in all circumstances. When the
application fails, Podman must restart it automatically to provide this
robustness. Otherwise, these devices may require customer IT to
physically gain access to restart, which can be prohibitively difficult.
Add a new `--on-failure` flag that supports four actions:
- **none**: Take no action.
- **kill**: Kill the container.
- **restart**: Restart the container. Do not combine the `restart`
action with the `--restart` flag. When running inside of
a systemd unit, consider using the `kill` or `stop`
action instead to make use of systemd's restart policy.
- **stop**: Stop the container.
To remain backwards compatible, **none** is the default action.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Just like the other inspect commands `podman pod inspect p1 p2` should
return the json for both.
To correctly implement this we follow the container inspect logic, this
allows use to reuse the global inspect command.
Note: To not break the existing single pod output format for podman pod
inspect I added a pod-legacy inspect type. This is only used to make
sure we will print the pod as single json and not an array like for the
other commands. We cannot use the pod type since podman inspect --type
pod did return an array and we should not break that as well.
Fixes#15674
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman update allows users to change the cgroup configuration of an existing container using the already defined resource limits flags
from podman create/run. The supported flags in crun are:
this command is also now supported in the libpod api via the /libpod/containers/<CID>/update endpoint where
the resource limits are passed inthe request body and follow the OCI resource spec format
–memory
–cpus
–cpuset-cpus
–cpuset-mems
–memory-swap
–memory-reservation
–cpu-shares
–cpu-quota
–cpu-period
–blkio-weight
–cpu-rt-period
–cpu-rt-runtime
-device-read-bps
-device-write-bps
-device-read-iops
-device-write-iops
-memory-swappiness
-blkio-weight-device
resolves#15067
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Allow end users to preprocess default environment variables before
injecting them into container using `--env-merge`
Usage
```
podman run -it --rm --env-merge some=${some}-edit --env-merge
some2=${some2}-edit2 myimage sh
```
Closes: https://github.com/containers/podman/issues/15288
Signed-off-by: Aditya R <arajan@redhat.com>
Accept a --amend flag in `podman manifest create`, and treat
`--insecure` as we would `--tls-verify=false` in `podman manifest`'s
"add", "create", and "push" subcommands.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
--cidfile : Read container ID from the specified file and restart the container.
--filter : restart the filtered container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
"podman kube generate" creates Kubernetes YAML from Podman containers,
pods or volumes. Users will still be able to use "podman generate
kube" as an alias of "kube generate".
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
`podman-remote manifest push` has shown absolutely no progress at all.
Fix that by doing the same as the remote-push code does.
Like remote-push, `quiet` parameter is true by default for backwards
compatibility.
Signed-off-by: Naoto Kobayashi <naoto.kobayashi4c@gmail.com>
implement new ssh interface into podman
this completely redesigns the entire functionality of podman image scp,
podman system connection add, and podman --remote. All references to golang.org/x/crypto/ssh
have been moved to common as have native ssh/scp execs and the new usage of the sftp package.
this PR adds a global flag, --ssh to podman which has two valid inputs `golang` and `native` where golang is the default.
Users should not notice any difference in their everyday workflows if they continue using the golang option. UNLESS they have been using an improperly verified ssh key, this will now fail. This is because podman was incorrectly using the
ssh callback method to IGNORE the ssh known hosts file which is very insecure and golang tells you not yo use this in production.
The native paths allows for immense flexibility, with a new containers.conf field `SSH_CONFIG` that specifies a specific ssh config file to be used in all operations. Else the users ~/.ssh/config file will be used.
podman --remote currently only uses the golang path, given its deep interconnection with dialing multiple clients and urls.
My goal after this PR is to go back and abstract the idea of podman --remote from golang's dialed clients, as it should not be so intrinsically connected. Overall, this is a v1 of a long process of offering native ssh, and one that covers some good ground with podman system connection add and podman image scp.
Signed-off-by: Charlie Doern <cdoern@redhat.com>
implement a new command `podman generate spec` which can formulate a json specgen to be consumed by both the pod
and container creation API.
supported flags are
--verbose (default true) print output to the terminal
--compact print the json output in a single line format to be piped to the API
--filename put the output in a file
--clone rename the pod/ctr in the spec so it won't conflict w/ an existing entity
Signed-off-by: Charlie Doern <cdoern@redhat.com>
- Allow creating sigstore signatures via --sign-by-sigstore-private-key .
Like existing --sign-by, it does not work remote (in this case
because we would have to copy the private key to the server).
- Allow passing a passphrase (which is mandatory for sigstore private keys)
via --sign-passphrase-file; if it is not provided, prompt interactively.
- Also, use that passphrase for --sign-by as well, allowing non-interactive
GPG use. (But --sign-passphrase-file can only be used with _one of_
--sign-by and --sign-by-sigstore-private-key.)
Note that unlike the existing code, (podman build) does not yet
implement sigstore (I'm not sure why it needs to, it seems not to
push images?) because Buildah does not expose the feature yet.
Also, (podman image sign) was not extended to support sigstore.
The test for this follows existing (podman image sign) tests
and doesn't work rootless; that could be improved by exposing
a registries.d override option.
The test for push is getting large; I didn't want to
start yet another registry container, but that would be an
alternative. In the future, Ginkgo's Ordered/BeforeAll
would allow starting a registry once and using it for two
tests.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
The same problem again as 4374038cc6.
Also fix the incorrect --format autocompletion struct.
It should be avoided to import cmd/podman/... packages from outside of
cmd/podman. This can lead in weird hard to debug import paths but also
can have negative consequences when imported in unit tests. In this case
it will set XDG_CONFIG_HOME and thus the machine tests this dir over the
tmp HOME env variable which is set at a later point. This caused machine
files to be leaked into the actual users home dir.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman-remote push` has shown absolutely no progress at all. Fix that
by doing essentially the same as the remote-pull code does.
The get-free-out-of-jail-card for backwards compatibility is to let the
`quiet` parameter default to true. Since the --quioet flag wasn't
working before either, older Podman clients do not set it.
Also add regression tests to make sure we won't regress again.
Fixes: #11554Fixes: #14971
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
add support for both creating a secret using yaml and mounting a secret as a volume given a yaml file.
Kubernetes secrets have a different structure than podman and therefore have to be handeled differently.
In this PR, I have introduced the basic usecases of kube secrets with more implementations like env secrets
to come!
resolves#12396
Signed-off-by: Charlie Doern <cdoern@redhat.com>
--latest : pause/unpause the latest container.
--filter : pause/unpause the filtered container.
--cidfile : Read container ID from the specified file and pause/unpause the container.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Filter flag is added for podman stop and podman --remote stop. Filtering logic is implemented in
getContainersAndInputByContext(). Start filtering can be manipulated to use this logic as well to limit redundancy.
Signed-off-by: Karthik Elango <kelango@redhat.com>
The "podman kube play" command is designed to be a replacement for the
"podman play kube" command.
It performs the same function as "play kube" while also still working with the same flags and options.
The "podman play kube" command is still functional as an alias of "kube play".
Closes#12475
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
Refactored the networkPrune function to improve readability.
This commit changes the `networkPrune` function to
use the `PrintNetworkPruneResults` function.
[NO NEW TESTS NEEDED]
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
It should be avoided to import cmd/podman/... packages from outside of
cmd/podman. This can lead in weird hard to debug import paths but also
can have negative consequences when imported in unit tests. In this case
it will set XDG_CONFIG_HOME and thus the machine tests this dir over the
tmp HOME env variable which is set at a later point. This caused machine
files to be leaked into the actual users home dir.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Bindings already support `Remove` which removes a manifest from the list
following function adds support for removing entire manifest for local
storage.
Similar functionality can be also used indirectly by using `Remove` defined in
image bindings
Signed-off-by: Aditya R <arajan@redhat.com>
add support for podman-remote image scp as well as direct access via the API. This entailed
a full rework of the layering of image scp functions as well as the usual API plugging and type creation
also, implemented podman image scp tagging. which makes the syntax much more readable and allows users t tag the new image
they are loading to the local/remote machine:
allow users to pass a "new name" for the image they are transferring
`podman tag` as implemented creates a new image im `image list` when tagging, so this does the same
meaning that when transferring images with tags, podman on the remote machine/user will load two images
ex: `podman image scp computer1::alpine computer2::foobar` creates alpine:latest and localhost/foobar on the remote host
implementing tags means removal of the flexible syntax. In the currently released podman image scp, the user can either specify
`podman image scp source::img dest::` or `podman image scp dest:: source::img`. However, with tags this task becomes really hard to check
which is the image (src) and which is the new tag (dst). Removal of that streamlines the arg parsing process
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Previously, health status events were not being generated at all. Both
the API and `podman events` will generate health_status events.
```
{"status":"health_status","id":"ae498ac3aa6c63db8b69a37583a6eae1a9cefbdbdbeeadcf8e1d66d745f0df63","from":"localhost/healthcheck-demo:latest","Type":"container","Action":"health_status","Actor":{"ID":"ae498ac3aa6c63db8b69a37583a6eae1a9cefbdbdbeeadcf8e1d66d745f0df63","Attributes":{"containerExitCode":"0","image":"localhost/healthcheck-demo:latest","io.buildah.version":"1.26.1","maintainer":"NGINX Docker Maintainers \u003cdocker-maint@nginx.com\u003e","name":"healthcheck-demo"}},"scope":"local","time":1656082205,"timeNano":1656082205882271276,"HealthStatus":"healthy"}
```
```
2022-06-24 11:06:04.886238493 -0400 EDT container health_status ae498ac3aa6c63db8b69a37583a6eae1a9cefbdbdbeeadcf8e1d66d745f0df63 (image=localhost/healthcheck-demo:latest, name=healthcheck-demo, health_status=healthy, io.buildah.version=1.26.1, maintainer=NGINX Docker Maintainers <docker-maint@nginx.com>)
```
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Libpod requires that all volumes are stored in the libpod db. Because
volume plugins can be created outside of podman, it will not show all
available plugins. This podman volume reload command allows users to
sync the libpod db with their external volume plugins. All new volumes
from the plugin are also created in the libpod db and when a volume from
the db no longer exists it will be removed if possible.
There are some problems:
- naming conflicts, in this case we only use the first volume we found.
This is not deterministic.
- race conditions, we have no control over the volume plugins. It is
possible that the volumes changed while we run this command.
Fixes#14207
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
[NO NEW TESTS NEEDED] podman pod clone somehow snuck by the new linter code that went in while it was in flight
fix that here
Signed-off-by: cdoern <cdoern@redhat.com>
The nolintlint linter does not deny the use of `//nolint`
Instead it allows us to enforce a common nolint style:
- force that a linter name must be specified
- do not add a space between `//` and `nolint`
- make sure nolint is only used when there is actually a problem
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
