When podman generate systemd is invoked, it previously did not check if
container-prefix or pod-prefix are empty. When these are empty, the file name
starts with the separator, which is hyphen by default. This results in files
like '-containername.service'.
The code now checks if these prefixes are empty. If they are, the filename no
longer adds a separator. Instead, it uses name or ID of the container or pod.
Closes#13272
Signed-off-by: Nirmal Patel <npate012@gmail.com>
pprof tests are way too flaky, and are causing problems for
community contributors who don't have privs to press Re-run.
There has been no activity or interest in fixing the bug,
and it's not something I can fix. So, just disable the test.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Secret-verify-leak is causing flakes, when running in parallel tests.
This is because remote secrets are copied into the context directory to
send to the API server, and secret-verify-leak is doing a COPY * and
then checking if the temporary secret file ends up in the container or
not. Since all the temporary files are prefixed with
"podman-build-secret", this test checks if podman-build-secret is in the
image. However, when run in parallel with other tests, other temporary
podman-build-secrets might be in the context dir. Moving
secret-verify-leak into its own directory makes sure that the context
dir is used only by this one test.
Also renamed Dockerfile -> Containerfile and cleaned up unused
Containerfiles.
Signed-off-by: Ashley Cui <acui@redhat.com>
Error out if the kube yaml passed to play kube has more
than one container or init container with the same name.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
do not attempt to use cgroups with pods if the cgroups are disabled.
A similar check is already in place for containers.
Closes: https://github.com/containers/podman/issues/13411
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
While resolving `workdir` we mostly create a `workdir` when `stat`
fails with `ENOENT` or `ErrNotExist` however following cases are not
true when user explicitly specifies a `workdir` while `running` using
`--workdir` which tells `podman` to only use workdir if its exists on
the container. Following configuration is implicity set with other
`run` mechanism like `podman play kube`
Problem with explicit `--workdir` or similar implicit config in `podman play
kube` is that currently podman ignores the fact that workdir can also be
a `symlink` and actual `link` could be valid.
Hence following commit ensures that in such scenarios when a `workdir`
is not found and we cannot create a `workdir` podman must perform a
check to ensure that if `workdir` is a `symlink` and `link` is resolved
successfully and resolved link is present on the container then we
return as it is.
Docker performs a similar behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
The kernel never sets the inheritable capabilities for a process, they
are only set by userspace. Emulate the same behavior.
Closes: CVE-2022-27649
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
(cherry picked from commit aafa80918a)
Update the login tests to reflect the latest changes to allow http{s}
prefixes (again) to address bugzilla.redhat.com/show_bug.cgi?id=2062072.
Backport of commit 57cdc21b00.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Backports: #13421 Set default rule at the head of device configuration
by @hshiina
The default rule should be set at the head of device configuration.
Otherwise, rules for user devices are overridden by the default rule so
that any access to the user devices are denied.
This has been requested to backport and to include in RHEL 8.6 and 9.0.
The exception process is underway.
Addresses these BZs for the backport:
https://bugzilla.redhat.com/show_bug.cgi?id=2059296https://bugzilla.redhat.com/show_bug.cgi?id=2062835
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
We could remove the container running the volume plugins, before
the containers using the volume plugins; this could cause
unmounting the volumes to fail because the plugin could not be
contacted.
Signed-off-by: Matthew Heon <mheon@redhat.com>
`podman play kube` tries to build images even if `--build` is set to
false so lets honor that and make `--build` , `true` by default so it
matches the original behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
Checkpoint/restore pod tests are not running with an older runc and now
that runc 1.1.0 appears in the repositories it was detected that the
tests were failing. This was not detected in CI as CI was not using runc
1.1.0 yet.
Signed-off-by: Adrian Reber <areber@redhat.com>
For the since and after imagve filter tests, instead of using the
read-only cache of images, we just use the empty r/w store. We then
build three images that are strictly predictable.
Signed-off-by: Brent Baude <bbaude@redhat.com>
The `podman network connect` and `podman network disconnect`
commands give containers access to different networks than the
ones they were created with; these networks can also have DNS
servers associated with them. Until now, however, we did not
modify resolv.conf as network membership changed.
With this PR, `podman network connect` will add any new
nameservers supported by the new network to the container's
/etc/resolv.conf, and `podman network disconnect` command will do
the opposite, removing the network's nameservers from
`/etc/resolv.conf`.
Fixes#9603
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
It seems we are ignoring output from healthcheck session.
Open a valid pipe to healthcheck session in order read its output.
Use common pipe for both `stdout/stderr` since that was the previous
behviour as well.
Signed-off-by: Aditya R <arajan@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
podman system prune should also remove all networks. When we want to
users to migrate to the new network stack we recommend to run podman
system reset. However this did not remove networks and if there were
still networks around we would continue to use cni since this was
considered an old system.
There is one exception for the default network. It should not be removed
since this could cause other issues when it no longer exists. The
network backend detection logic ignores the default network so this is
fine.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
these mount flags are already used for the /dev/shm mount on the host,
but they are not set for the bind mount itself.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
by default slirp4netns uses the tap0 device. When slirp4netns is
used, use that device by default instead of eth0.
Closes: https://github.com/containers/podman/issues/11695
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Often users want their overlayed volumes to be `non-volatile` in nature
that means that same `upper` dir can be re-used by one or more
containers but overall of nature of volumes still have to be `overlay`
so work done is still on a overlay not on the actual volume.
Following PR adds support for more advanced options i.e custom `workdir`
and `upperdir` for overlayed volumes. So that users can re-use `workdir`
and `upperdir` across new containers as well.
Usage
```console
$ podman run -it -v myvol:/data:O,upperdir=/path/persistant/upper,workdir=/path/persistant/work alpine sh
```
Signed-off-by: Aditya R <arajan@redhat.com>
podman network create --subnet, --gateway and --ip-range can now be
specified multiple times to join the network to more than one subnet.
This is very useful if you want to use a dual stack network and assign a
fixed ipv4 and ipv6 subnet. The order of the options is important here,
the first --gateway/--ip-range will be assigned to the first subnet and
so on.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Bumps Buildah to v1.24.0 and adopts the new values for pull:
true, false, never, and always. The pull-never and pull-always options
for the build command are still usable, but they have been removed from
the man page documentation with this change.
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
Before this PR, the podman --help command shows the defaults
as runc and overlay even if the storage.conf and containers.conf
files do not match. This PR changes them to show the actual defaults
and in the case of storage driver, does not show the default at all.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We should not check if the network supports dns when we create a
container with network aliases. This could be the case for containers
created by docker-compose for example if the dnsname plugin is not
installed or the user uses a macvlan config where we do not support dns.
Fixes#12972
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This PR fixes nil pointer dereference for configmap optional parameter.
When optional parameter is not passed, the code tried to acces the
parameter which caused nil pointer dereference.
Signed-off-by: Ondra Machacek <omachace@redhat.com>
Heuristic to initialize TunnelMode/remote podman:
- Podman built with remote tag
- Podman running on darwin or windows GOOS
- CONTAINER_HOST or CONTAINER_CONNECTION set in environment
- --remote flag given on command line
- From containers.conf, Engine.Remote == true and GOOS == linux
Otherwise, podman will run in ABIMode/linked against libpod library.
Fixes#12866
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This commit includes:
* Handlers for generate systemd unit
with manually defined dependencies such as:
Wants=, After= and Requires=
* The new unit and e2e tests for checking generated systemd units
for container and pod with custom dependencies
* Documented descriptions for custom dependencies options
Signed-off-by: Eugene (Evgenii) Shubin <esendjer@gmail.com>
Since this option will also be used for netavark we should rename it to
something more generic. It is important that --cni-config-dir still
works otherwise we could break existing container cleanup commands.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Improve our compatibility with Docker by better handling the
state strings that we print in `podman ps`. Docker capitalizes
all states in `ps` (we do not) - fix this in our PS code. Also,
stop normalizing ContainerStateConfigured to the "Created" state,
and instead make it always be Created, with the existing Created
state becoming Initialized.
I didn't rename the actual states because I'm somewhat reticent
to make such a large change a day before we leave for break. It's
somewhat confusing that ContainerStateConfigured now returns
Created, but internally and externally we're still consistent.
[NO NEW TESTS NEEDED] existing tests should catch anything that
broke.
I also consider this a breaking change. I will flag appropriately
on Github.
Fixes RHBZ#2010432 and RHBZ#2032561
Signed-off-by: Matthew Heon <mheon@redhat.com>
* Update method/function signatures use the manifest list name and
images associated with the operation explicitly, in general
func f(ctx context.Context, manifestListName string,
ImageNames []string, options *fOptions)
* Leverage gorilla/mux Subrouters to support API v3.x and v4.x for
manifests
* Make manifest API endpoints more RESTful
* Add PUT /manifest/{id} to update existing manifests
* Add manifests.Annotate to go bindings, uncommented unit test
* Add DELETE /manifest/{Id} to remove existing manifest list, use
PUT /manifest/{id} to remove images from a list
* Deprecated POST /manifest/{id}/add and /manifest/{id}/remove, use
PUT /manifest/{id} instead
* Corrected swagger godoc and updated to cover API changes
* Update podman manifest commands to use registry.Context()
* Expose utils.GetVar() to obtain query parameters by name
* Unexpose server.registerSwaggerHandlers, not sure why this was ever
exposed.
* Refactored code to use http.Header instead of map[string]string when
operating on HTTP headers.
* Add API-Version header support in bindings to allow calling explicate
versions of the API. Header is _NOT_ forwarded to the API service.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
