If user sets namespace to host, then default sysctls need to be ignored
that are specific to that namespace.
--net=host ignore sysctls that begin with net.
--ipc=host ignore fs.mqueue
--uts=host ignore kernel.domainname and kernel.hostname
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a bunch of tests to ensure that --volumes-from
works as expected.
Also align the podman create and run man page.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Currently infr-command and --infra-image commands are ignored
from the user. This PR instruments them and adds tests for
each combination.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Record the user-specified "raw" image name in the SpecGenerator, so we
can pass it along to the config when creating a container. We need a
separate field as the image name in the generator may be set to the
ID of the previously pulled image - ultimately the cause of #7404.
Reverting the image name from the ID to the user input would not work
since "alpine" for pulling iterates over the search registries in the
registries.conf but looking up "alpine" normalizes to
"localhost/alpine".
Recording the raw-image name directly in the generator was the best of
the options I considered as no hidden magic from search registries or
normalizations (that may or may not change in the future) can interfere.
The auto-update backend enforces that the raw-image name is a
fully-qualified reference, so we need to worry about that in the front
end.
Fixes: #7407
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
During the redesign of podman 2.0, we dropped the support for --oom-score-adj.
Test for this flag was bogus and thus passing when it was broken.
Basically just need to set the value in the spec.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1877187
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If we select "unconfined" as AppArmor profile, then we should not error
even if the host does not support it at all. This behavior has been
fixed and a corresponding e2e test has been added as well.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
podman needs to use the environment settings in containers.conf
when setting up the containers.
Also host environment variables should be relative to server side
not the client.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The seccomp/containers-golang library is not maintained any more and we
should stick to containers/common.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
We have a lot of 'cannot stat %s' errors in our codebase. These
are terrible and confusing and utterly useless without context.
Add some context to a few of them so we actually know what part
of the code is failing.
Signed-off-by: Matthew Heon <mheon@redhat.com>
it allows to manually tweak the configuration for cgroup v2.
we will expose some of the options in future as single
options (e.g. the new memory knobs), but for now add the more generic
--cgroup-conf mechanism for maximum control on the cgroup
configuration.
OCI specs change: https://github.com/opencontainers/runtime-spec/pull/1040
Requires: https://github.com/containers/crun/pull/459
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In podman 1.0 if you executed a command like:
podman run --user dwalsh --cap-add net_bind_service alpine nc -l 80
It would work, and the user dwalsh would get the capability, in
podman 2.0, only root and the binding set gets the capability.
This change restores us back to the way podman 1.0 worked.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
because a pod's network information is dictated by the infra container at creation, a container cannot be created with network attributes. this has been difficult for users to understand. we now return an error when a container is being created inside a pod and passes any of the following attributes:
* static IP (v4 and v6)
* static mac
* ports -p (i.e. -p 8080:80)
* exposed ports (i.e. 222-225)
* publish ports from image -P
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add better error message when using `--pod` and `--hostname`.
Improve the docs to better explain the uts hostname relation.
Add more valid options for the `--uts` flag.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Most Libpod containers are made via `pkg/specgen/generate` which
includes code to generate an appropriate exit command which will
handle unmounting the container's storage, cleaning up the
container's network, etc. There is one notable exception: pod
infra containers, which are made entirely within Libpod and do
not touch pkg/specgen. As such, no cleanup process, network never
cleaned up, bad things can happen.
There is good news, though - it's not that difficult to add this,
and it's done in this PR. Generally speaking, we don't allow
passing options directly to the infra container at create time,
but we do (optionally) proxy a pre-approved set of options into
it when we create it. Add ExitCommand to these options, and set
it at time of pod creation using the same code we use to generate
exit commands for normal containers.
Fixes#7103
Signed-off-by: Matthew Heon <mheon@redhat.com>
it allows to customize the options passed down to the OCI runtime for
setting up the /proc mount.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Podman 1.6.2 changed systemd mode auto-detection from commands ending in
``init`` to hard-coded paths ``/sbin/init`` and ``/usr/sbin/init``. This
broke FreeIPA container. ``podman run`` and ``podman create`` now
activate systemd mode when the command is ``/usr/local/sbin/init``.
Fixes: https://github.com/containers/podman/issues/7287
Signed-off-by: Christian Heimes <cheimes@redhat.com>
To sync the behavior between AppArmor and seccomp it is now possible to
also specify seccomp profiles for privileged containers.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Buildah and podman build can create images without a working dir.
FROM fedora
WORKDIR /test
If you build this image with caching twice, the second time the image
will not have a working dir.
Similarly if you execute
podman run --workdir /foobar fedora
It blows up since the workingdir is not created automatically.
Finally there was duplicated code for getting the workingdir
out of an image, that this PR removes.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This matches Docker behavior, and seems to make sense - the CMD
may have been specific to the original entrypoint and probably
does not make sense if it was changed.
While we're in here, greatly simplify the logic for populating
the SpecGen's Command. We create the full command when making the
OCI spec, so the client should not be doing any more than setting
it to the Command the user passed in, and completely ignoring
ENTRYPOINT.
Fixes#7115
Signed-off-by: Matthew Heon <mheon@redhat.com>
A recent crun change stopped the creation of the container's
working directory if it does not exist. This is arguably correct
for user-specified directories, to protect against typos; it is
definitely not correct for image WORKDIR, where the image author
definitely intended for the directory to be used.
This makes Podman create the working directory and chown it to
container root, if it does not already exist, and only if it was
specified by an image, not the user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When you execute podman create/run with the --pod new:<name> syntax
the pod was created but the namespaces where not shared and
therefore containers could not communicate over localhost.
Add the default namespaces and pass the network options to the
pod create options.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The initial version of the new port code mistakenly restricted
this, so un-restrict it. We still need to maintain the map of
container ports, unfortunately (need to verify if the port in
question is a duplicate, for example).
Fixes#7062
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently you can not apply an ApparmorProfile if you specify
--privileged. This patch will allow both to be specified
simultaniosly.
By default Apparmor should be disabled if the user
specifies --privileged, but if the user specifies --security apparmor:PROFILE,
with --privileged, we should do both.
Added e2e run_apparmor_test.go
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
When creating a pod or container where a static MAC or IP address is provided, we should return a proper error and exit as 125.
Fixes: #6972
Signed-off-by: Brent Baude <bbaude@redhat.com>
As of podman 1.8.0, because of commit da7595a, the default approach of providing
port-forwarding in rootless mode has switched (and been hard-coded) to rootlessport,
for the purpose of providing super performance. The side-effect of this switch is
source within the container to the port-forwarded service always appears to originate
from 127.0.0.1 (see issue #5138).
This commit allows a user to specify if they want to revert to the previous approach
of leveraging slirp4netns add_hostfwd() api which, although not as stellar performance,
restores usefulness of seeing incoming traffic origin IP addresses.
The change should be transparent; when not specified, rootlessport will continue to be
used, however if specifying --net slirp4netns:slirplisten the old approach will be used.
Note: the above may imply the restored port-forwarding via slirp4netns is not as
performant as the new rootlessport approach, however the figures shared in the original
commit that introduced rootlessport are as follows:
slirp4netns: 8.3 Gbps,
RootlessKit: 27.3 Gbps,
which are more than sufficient for many use cases where the origin of traffic is more
important than limits that cannot be reached due to bottlenecks elsewhere.
Signed-off-by: Aleks Mariusz <m.k@alek.cx>
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We were only using the Command field in specgen when determining
whether to enable systemd if systemd=true (the default) was used.
This does not include the entrypoint, and does not include any
entrypoint/command sourced from the image - so an image could be
running systemd and we'd not correctly detect this. Using the
full, final command resolves this and matches Podman v1.9.x
behavior.
Fixes#6920
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently we are sending over pids-limits from the user even if they
never modified the defaults. The pids limit should be set at the server
side unless modified by the user.
This issue has led to failures on systems that were running with cgroups V1.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
