When a user specifies a invalid connection in CONTAINER_CONNECTION then
podman should return a proper error saying so. Currently it ignored the
error and in rootFlags() just exited early with defining any flags. This
caused a panic then when trying to use the flags later.
In order to address this first store the connection error in the
PodmanConfig struct and not abort right away during flag setup. This is
important as the user might have specified a flag with a valid remote
connection. As such we check all flags and only when none were given we
return the connection error.
Also while at it I noticed that the default connection reported via
podman --help was wrong as it only used the old containers.conf field
for it and did not consider the podman-connections.json default.
New regression tests have been added to make sure it behaves correctly.
This fixes the problem reported in the PR #22997.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
add a new flag that allows to override the pull options configured in
the storage.conf file.
e.g.: --pull-option="enable_partial_images=false" can be specified to
Podman to disable partial pulls even if enabled.
Leave it as a hidden configuration flag for now since the API itself
is marked as experimental in c/storage.
Currently c/storage doesn't honor the overrides, being fixed with
https://github.com/containers/storage/pull/1966
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Add a `podman system check` that performs consistency checks on local
storage, optionally removing damaged items so that they can be
recreated.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
The expectation with --cgroups=disabled is that the current cgroup is
used by the container.
Currently the --cgroups=disabled is passed directly to the OCI
runtime, but it doesn't stop Podman from creating a new cgroup when it
doesn't own the current one.
Closes: https://github.com/containers/podman/issues/20910
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
wait for the healthy status on the thread where the container lock is
held. Otherwise, if it is performed from a go routine, a different
thread is used (since the runtime.LockOSThread() call doesn't have any
effect), causing pthread_mutex_unlock() to fail with EPERM.
Closes: https://github.com/containers/podman/issues/22651
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Some programs have their configuration files relative to the user's
home. It would be convenient being able to mount these into the container, but
that requires expansion of `~` or `$HOME` in a label. This commit adds support
for that for the `runlabel` command.
Signed-off-by: Dan Čermák <dcermak@suse.com>
Effectively, this is an ability to take an image already pulled
to the system, and automatically mount it into one or more
containers defined in Kubernetes YAML accepted by `podman play`.
Requirements:
- The image must already exist in storage.
- The image must have at least 1 volume directive.
- The path given by the volume directive will be mounted from the
image into the container. For example, an image with a volume
at `/test/test_dir` will have `/test/test_dir` in the image
mounted to `/test/test_dir` in the container.
- Multiple images can be specified. If multiple images have a
volume at a specific path, the last image specified trumps.
- The images are always mounted read-only.
- Images to mount are defined in the annotation
"io.podman.annotations.kube.image.automount/$ctrname" as a
semicolon-separated list. They are mounted into a single
container in the pod, not the whole pod.
As we're using a nonstandard annotation, this is Podman only, any
Kubernetes install will just ignore this.
Underneath, this compiles down to an image volume
(`podman run --mount type=image,...`) with subpaths to specify
what bits we want to mount into the container.
Signed-off-by: Matt Heon <mheon@redhat.com>
This is something Docker does, and we did not do until now. Most
difficult/annoying part was the REST API, where I did not really
want to modify the struct being sent, so I made the new restart
policy parameters query parameters instead.
Testing was also a bit annoying, because testing restart policy
always is.
Signed-off-by: Matt Heon <mheon@redhat.com>
Commit 668d517af9 moved a lot of type definitions and by that also
copied a bucnh of swagger:model comments, this caused swagger to create
a incorrect yaml that can no longer be parsed by redoc due
"Self-referencing circular pointer".
The yaml basically defined the type with a name and the pointed to the
same name definition again so it caused a infinitive recursion where
redoc just throws an error but the swagger style ignored the case so it
seemed like it worked but obviously the type information was not
working.
Fixes#22351
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
when listing images through the restful service, consumers want to know
if the image they are listing is a manifest or not because the libpod
endpoint returns both images and manifest lists.
in addition, we now add `arch` and `os` as fields in the libpod endpoint
for image listing as well.
Fixes: #22184Fixes: #22185
Signed-off-by: Brent Baude <bbaude@redhat.com>
Docker shows exposed ports as just PORT/PROTO so match that behavior. It
is not clear to me why someone needs that information in ps as "expose"
doesn't effect anything networking related.
Fixes https://issues.redhat.com/browse/RHEL-32154
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This was added ages ago in commit c65b3599cc, however in the meantime
both podman and conmon can support longer socket paths as they use a
workaround to open the path via /proc/self/fd, see openUnixSocket() in
libpod/oci_conmon_attach_linux.go
Thus this restriction is not needed anymore and we can drop a workaround
in the tests.
Fixes#22272
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we remove with --force we do not return a error if the input does
not exists, however if we get more than on input we must try to remove
all and not just NOP out and not remove anything just because one arg
did not exists.
Also make the code simpler for commands that do have the --ignore option
and just make --force imply --ignore which reduces the ugly error
handling.
Fixes#21529
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Healthchecks, defined in a .yaml file as livenessProbe did not had any
effect. They were executing as intended, containers were marked as
unhealthy, yet no action was taken. This was never the intended
behaviour, as observed by the comment:
> if restart policy is in place, ensure the health check enforces it
A minimal example is tracked in containers/podman#20903 [1] with the
following YAML:
```yaml
apiVersion: v1
kind: Pod
metadata:
name: ubi-httpd-24
spec:
restartPolicy: Always
containers:
- name: ubi8-httpd
image: registry.access.redhat.com/rhscl/httpd-24-rhel7:2.4-217
livenessProbe:
httpGet:
path: "/"
port: 8081
```
By passing down the restart policy (and using constants instead of
actually wrong hard-coded ones), Podman actually restarts the container
now.
[1]: https://github.com/containers/podman/issues/20903Closes#20903.
Signed-off-by: Jasmin Oster <nachtjasmin@posteo.de>
Commit 03f6589f3 added basic support for pull-error event from libimage
but it contains several problems:
1. storing the error as error type prevents it from being unmarshalled,
thus change it to a string
2. the error was never propagated from the libimage event to the podman
event struct
3. the error message was not wired into the cli and API
This commit fixes these problems.
Fixes#21458
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a --artifact flag to `podman manifest add` which can be used to
create an artifact manifest for one or more files and attach it to a
manifest list. Corresponding --artifact-type, --artifact-config-type,
--artifact-config, --artifact-layer-type, --artifact-subject, and
--artifact-exclude-titles options can be used to fine-tune the fields in
the artifact manifest that don't refer to the files themselves.
Add a --index option to `podman manifest annotate` that will cause
values passed to the --annotation flag to be applied to the manifest
list as a whole instead of to an entry in the list.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Like docker podman network inspect should output the information of
running container with their ip/mac address on this network.
However the output format is not docker compatible as this cannot
include all the info we have and the previous output was already not
compatible so this is not new.
New example output:
```
[
{
...
"containers": {
"7c0d295779cee4a6db7adc07a99e635909413a390eeab9f951edbc4aac406bf1": {
"name": "c2",
"interfaces": {
"eth0": {
"subnets": [
{
"ipnet": "10.89.0.4/24",
"gateway": "10.89.0.1"
},
{
"ipnet": "fda3:b4da:da1e:7e9d::4/64",
"gateway": "fda3:b4da:da1e:7e9d::1"
}
],
"mac_address": "1a:bd:ca:ea:4b:3a"
}
}
},
"b17c6651ae6d9cc7d5825968e01d6b1e67f44460bb0c140bcc32bd9d436ac11d": {
"name": "c1",
"interfaces": {
"eth0": {
"subnets": [
{
"ipnet": "10.89.0.3/24",
"gateway": "10.89.0.1"
},
{
"ipnet": "fda3:b4da:da1e:7e9d::3/64",
"gateway": "fda3:b4da:da1e:7e9d::1"
}
],
"mac_address": "f6:50:e6:22:d9:55"
}
}
}
}
}
]
```
Fixes#14126
Fixes https://issues.redhat.com/browse/RHEL-3153
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The reserved annotation io.podman.annotations.volumes-from is made public to let user define volumes-from to have one container mount volumes of other containers.
The annotation format is: io.podman.annotations.volumes-from/tgtCtr: "srcCtr1:mntOpts1;srcCtr2:mntOpts;..."
Fixes: containers#16819
Signed-off-by: Vikas Goel <vikas.goel@gmail.com>
The default location for temporary files created by mktemp may not
have enough space for an image. Use the new SSH functions which
support an input reader to make the code simpler, more reliable,
and more efficient.
[NO NEW TESTS NEEDED]
Signed-off-by: Gordon Messmer <gordon.messmer@gmail.com>
Align the behaviour of `podman kube play file.yaml` to Kubernetes' by forcing
an image pull when `imagePullPolicy` is omitted and the container image does
not specify a tag.
Signed-off-by: Maurizio Porrato <mporrato@redhat.com>
SSH uses 22 as default so it is really not necessary to require the
port. The backend code already does this but the parsing in the
frontend always tried to parse the port.
[NO NEW TESTS NEEDED] This would require actual remote host ssh setup in
CI so it is not possible to be check but I verified it locally.
Fixes https://issues.redhat.com/browse/RHEL-17776
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
This mirrors how the Docker API handles things, allowing us to be
more compatible with Docker and more verbose on the Libpod API.
Stats are given as per network interface in the container, but
still aggregated for `podman stats` and `podman pod stats`
display (so the CLI does not change, only the Libpod and Compat
APIs).
Signed-off-by: Matt Heon <mheon@redhat.com>
The pasta network mode has been added in podman v4.4 and this causes a
conflict with named networks that could also be called "pasta". To not
break anything we had special logic to prefer the named network over the
network mode. Now with 5.0 we can break this and remove this awkward
special handling from the code.
Containers created with 4.X that use a named network pasta will also
continue to work fine, this chnage will only effect the creation of new
containers with a named network pasta and instead always used the
network mode pasta. We now also block the creation of networks with the
name "pasta".
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
