In the unlock/timeout test, on slow systems, 'podman ps' could
catch the container before the just-backgrounded 'podman stop'
sends the signal. Wait for signal ack from container before
we inspect it.
Also: If I understand the test correctly, it wasn't actually
checking that 'ps' could grab the lock while the container
was exiting. Add a check.
Signed-off-by: Ed Santiago <santiago@redhat.com>
New functionality -- mostly in the diffs we apply to
buildah's helpers.bash -- to enable running buildah-bud
tests under podman-remote. The gist of it is, we start
a 'podman system service' before each test, and clean
it up on test exit.
Design decision: the diff file for helpers.bash is no
longer trailing-whitespace-clean: that ended up producing
diffs that git wouldn't apply, because in some cases
the whitespace is actually important. In order to pass CI,
we need to exclude this file from some checks.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Compat healthcheck tests are of the format []string but podman's were of
the format string. Converted podman's to []string at the specgen level since it has the same effect
and removed the incorrect parsing of compat healthchecks.
fixes#10617
Signed-off-by: cdoern <cdoern@redhat.com>
Address a number of issues in the streaming logic in remote build, most
importantly an error in using buffered channels on the server side.
The pattern below does not guarantee that the channel is entirely read
before the context fires.
for {
select {
case <- bufferedChannel:
...
case <- ctx.Done():
...
}
}
Fixes: #10154
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The upcoming commit to support checkpointing out of Pods requires CRIU
3.16. This changes the CRIU version check to support checking for
different versions.
Signed-off-by: Adrian Reber <areber@redhat.com>
Reduce the amount of `podman exec`s in the cp system tests.
Exec is expensive and a number of them could easily be combined
into the container command.
This cuts down the costs of running the tests by around 25 percent
on my local machine.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement container to container copy. Previously data could only be
copied from/to the host.
Fixes: #7370
Co-authored-by: Mehul Arora <aroram18@mcmaster.ca>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Compat healthcheck tests are of the format []string but podman's were of
the format string. Converted podman's to []string at the specgen level since it has the same effect
and removed the incorrect parsing of compat healthchecks.
fixes#10617
Signed-off-by: cdoern <cdoern@redhat.com>
This commit follows work started in #10756. Changes made in #11015
enabled cli support for volume prune --filter until. Adding e2e test
closes#10579.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
Make sure podman network create reads all subnets from existing cni configs
and not only the first one.
Fixes#11032
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Pull policies in K8s yaml may be capitalized, so lower them before
parsing.
Fixes: bugzilla.redhat.com/show_bug.cgi?id=1985905
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
By proxy by vendoring containers/common. Previously, a "dangling" image
was an untagged image; just a described in the Docker docs. The
definition of dangling has now been refined to an untagged image without
children to be compatible with Docker.
Further update a redundant image-prune test.
Fixes: #10998Fixes: #10832
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
If importing an archive via stdin write it to a temporary file such that
the temporary file can be opened multiple times later on. Otherwise, we
may end up with an empty image.
Also fix a bug in the URL parsing code; we need to check whether there's
actually a scheme.
Add system tests for `podman import` exercising the basics.
Fixes: #10994
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Wow did I screw up. #10982 introduced (at my suggestion) a
new wait_for_port() helper, with the goal of eliminating a
race condition. It didn't work.
First: wait_for_port() tests by connecting to the port, which
is a Bad Idea when you have a one-shot server that exits upon
the first connection closing. We should've caught that, but:
Second: I wrote wait_for_port() for a non-BATS test framework,
and used the conventional file descriptor 3. BATS uses fd3
for internal control. Overriding that made the test silently
just disappear, no "not ok" message, no warnings, nothing
except vanishing into the ether.
Third: this was caught by my log-colorizer script, which
loudly yelled "WARNING: expected 234" (tests) at the
bottom of the log. Unfortunately, since this wasn't
my PR, I didn't actually look at the test logs.
Solution: we can't use wait_for_port() in the network port
test. Use wait_for_output() instead, triggering on the
'listening' message emitted by netcat in the container.
Also: fix wait_for_port() to use fd5 instead of 3. Although
no code currently uses wait_for_port() as of this PR, it's
a useful helper that we may want to keep.
Signed-off-by: Ed Santiago <santiago@redhat.com>
compat containers/logs was missing actual usage of until query param.
This led me to implement the until param for libpod's container logs as well. Added e2e tests.
Signed-off-by: cdoern <cdoern@redhat.com>
As a conclusion of a discussion in #10861, until filter is added
by this commit to volume ls filters.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
We don't support the journald events backend on RHEL8, for
example. So we can't unconditionally run these tests.
Partial fix for RHBZ1955166
Signed-off-by: Matthew Heon <mheon@redhat.com>
Followup to #10932: add a validation check to prevent introduction
of new 'Expect(foo.ExitCode()).To(...)' patterns. If such use is
absolutely necessary -- there is one such instance in the code
already -- require that the assertion include a description.
Also: clean up instances that were introduced since the merging
of #10932.
Also: fix one remaining instance in run_exit_test.go: it had
a FIXME comment mentioning a race condition, but unfortunately
there was no issue or bug ID, hence no way to know if the race
is fixed or not. We will assume it is.
Signed-off-by: Ed Santiago <santiago@redhat.com>
First and foremost: use ephemeral (/run, $XDG) directories
for systemd unit files, so as not to vandalize a working system.
Second, refactor common systemd-related functionality into
a new helper file, loaded by the systemd-related tests.
Shared functionality includes:
* setting $XDG_RUNTIME_DIR if unset and rootless
* setting $UNIT_DIR for use by tests
* new systemctl() and journalctl() functions, which
include "--user" when rootless (why can't systemd
figure this out on its own?)
Signed-off-by: Ed Santiago <santiago@redhat.com>
auto-update test is failing on non-x86_64 arch:
https://gitlab.com/cki-project/kernel-tests/-/issues/614#note_630010734
Reason: test was relying on alpine_nginx image; this is
a custom libpod image that only has a x86_64 version.
Solution: use busybox instead. Busybox was copied from
docker.io using skopeo copy --all, so it has all arches.
Signed-off-by: Ed Santiago <santiago@redhat.com>
They were being skipped for no clear reason.
Also: use --files and --name option in generate-systemd. Before,
output went to stdout, resulting in completely unreadable logs
on test failure.
Also: use volatile systemd directories (/run, $XDG_RUNTIME_DIR)
instead of permanent ones. Thanks to @Luap99 for the reference.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Handle the platform parameter correctly. The parameter was only parsed
in presence of credentials and the code was a bit complex. Also add a
regression test.
Fixes: #10977
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
It was observed during periodic testing, this test can fail due to the
container process being not fully running and listening on the expected
port:
```
[+1069s] not ok 220 podman networking: port with --userns=keep-id
[+1069s] # (in test file test/system/500-networking.bats, line 144)
[+1069s] # `echo "$teststring" | nc 127.0.0.1 $myport' failed
[+1069s] # # /var/tmp/go/src/github.com/containers/podman/bin/podman rm
--all --force
[+1069s] # # /var/tmp/go/src/github.com/containers/podman/bin/podman ps
--all --external --format {{.ID}} {{.Names}}
[+1069s] # # /var/tmp/go/src/github.com/containers/podman/bin/podman
images --all --format {{.Repository}}:{{.Tag}} {{.ID}}
[+1069s] # quay.io/libpod/testimage:20210610 9f9ec7f2fdef
[+1069s] # # /var/tmp/go/src/github.com/containers/podman/bin/podman run
-d --userns=keep-id -p 127.0.0.1:54322:54322
quay.io/libpod/testimage:20210610 nc -l -n -v -p 54322
[+1069s] #
252c562c9a3c96892d867d1d72fb52b2efdfe62855ebedbccd2d281c472c2988
[+1069s] # Ncat: No route to host.
```
Fix this by using a new `wait_for_port()` function (thanks @edsantiago)
before attempting to communicate with the service.
Signed-off-by: Chris Evich <cevich@redhat.com>
