When creating a container in a pod the podname was always set as
the dns entry. This is incorrect when the container is not part
of the pods network namespace. This happend both rootful and
rootless. To fix this check if we are part of the pods network
namespace and if not use the container name as dns entry.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
If the image name not a manifest list type, enable manifest inspect to return manifest of single image manifest type vnd.docker.distribution.manifest.v2+json.
Signed-off-by: Qi Wang <qiwan@redhat.com>
Remove the search limit check since the c/image v5.6.0 supports pagination and can give result over 100 entries.
Signed-off-by: Qi Wang <qiwan@redhat.com>
Containers that share IPC Namespaces share each others
/dev/shm, which means a private /dev/shm needs to be setup
for the infra container.
Added a system test and an e2e test to make sure the
/dev/shm is shared.
Fixes: https://github.com/containers/podman/issues/8181
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Followon to #7965 (mirror registry). mirror.gcr.io doesn't
cache all the images we need, and I can't find a way to
add to its cache, so let's just use quay.io for those
images that it can't serve.
Tools used:
skopeo copy --all docker://docker.io/library/alpine:3.10.2 \
docker://quay.io/libpod/alpine:3.10.2
...and also:
docker.io/library/alpine:3.2
docker.io/library/busybox:latest
docker.io/library/busybox:glibc
docker.io/library/busybox:1.30.1
docker.io/library/redis:alpine
docker.io/libpod/alpine-with-bogus-seccomp:label
docker.io/libpod/alpine-with-seccomp:label
docker.io/libpod/alpine_healthcheck:latest
docker.io/libpod/badhealthcheck:latest
Since most of those were new quay.io/libpod images, they required
going in through the quay.io GUI, image, settings, Make Public.
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman inspect only had the capabilities to inspect containers and images. if a user wanted to inspect a pod, volume, or network, they would have to use `podman network inspect`, `podman pod inspect` etc. Docker's cli allowed users to inspect both volumes and networks using regular inspect, so this commit gives the user the functionality
If the inspect type is not specified using --type, the order of inspection is:
containers
images
volumes
networks
pods
meaning if container that has the same name as an image, podman inspect would return the container inspect.
To avoid duplicate code, podman network inspect and podman volume inspect now use the inspect package as well. Podman pod inspect does not because podman pod inspect returns a single json object while podman inspect can return multiple)
Signed-off-by: Ashley Cui <acui@redhat.com>
Detached containers and detach keys are only created with the podman run, i
exec, and start commands. We do not store the detach key sequence or the
detach flags in the database, nor does Docker. The current code was ignoreing
these fields but documenting that they can be used.
Fix podman create man page and --help output to no longer indicate that
--detach and --detach-keys works.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This does not match Docker, which does not add hostname in this
case, but it seems harmless enough.
Fixes#8095
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Make a distinction between pods that are completely running (all
containers running) and those that have some containers going,
but not all, by introducing an intermediate state between Stopped
and Running called Degraded. A Degraded pod has at least one, but
not all, containers running; a Running pod has all containers
running.
First step to a solution for #7213.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
In older versions of podman, we supported decimal numbers defaulting
to microseconds. This PR fixes to allow users to continue to specify
only digits.
Also cleaned up documentation to fully describe what input for --interval flag.
Finally improved testing on podman wait to actually make sure the command succeeded.
Fixed tests to work on podman-remote.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- apiv2 - the 'ten /info requests' test is flaking often,
taking ~8 seconds (our limit is 7, up from 5 a few weeks
ago). Brent suggested that the first /info call might be
expensive, because it needs to access storage. So, let's
prime it by running one /info outside the timing loop.
And, because even that continues to fail, bump it up
to 10 seconds and file #8076 to track the slowdown.
- toolbox test - WaitForReady() has timed out, even on one
occasion causing a run failure because it failed 3 times.
Solution: bump up timeout from 2s to 5s. Not really great,
but CI systems are underpowered, and it's not unreasonable
that 2s might be too low.
- sdnotify test - add a 'podman wait' between stop & rm.
This may prevent a "cannot rm container as it is running"
race condition.
While working on this, Brent and I noticed a few ways that
test-apiv2 logging can be improved:
- test name: when request is POST, display the jsonified
parameters, not the original input ones. This should
make it much easier to reproduce failures.
- use curl's "--write-out" option to capture http code,
content type, and request time. We were getting the
first two via grep from logged headers; this is cleaner.
And there was no other way to get timing. We now include
the timing as X-Response-Time in the log file.
- abort on *any* curl error, not just 7 (cannot connect).
Any error at all from curl is bad news.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When a container either joins a pod that shares the network
namespace or uses `--net=container:` to share the network
namespace of another container, it does not have its own copy of
the CNI results used to generate `podman inspect` output. As
such, to inspect these containers, we should be going to the
container we share the namespace with for network info.
Fixes#8073
Signed-off-by: Matthew Heon <mheon@redhat.com>
When defining multiple ports (same src/dst) like `-p 80:80 -p 443:443`
then podman will not show the complete output on `podman ps` (only
`0.0.0.0:80->80/tcp` in the example). This also applies to port ranges.
This patch refactors the port loop by pre-checking for ranges and
displaying them correctly to the end user.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
When a container uses --net=host the default hostname is set to
the host's hostname. However, we were not creating any entries
in `/etc/hosts` despite having a hostname, which is incorrect.
This hostname, for Docker compat, will always be the hostname of
the host system, not the container, and will be assigned to IP
127.0.1.1 (not the standard localhost address).
Also, when `--hostname` and `--net=host` are both passed, still
use the hostname from `--hostname`, not the host's hostname (we
still use the host's hostname by default in this case if the
`--hostname` flag is not passed).
Fixes#8054
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Previously, using an invalid image name would produce an error like
this:
Error: error encountered while bringing up pod test-pod-0: invalid reference format
This message didn't specify that there was an problem with an image
name, and it didn't specify which image name had a problem if there were
multiple. Now the error reads:
Error: error encountered while bringing up pod test-pod-0: Failed to parse image "./myimage": invalid reference format
Signed-off-by: Jordan Christiansen <xordspar0@gmail.com>
These options are now fully supported in the remote API and should no
longer be hidden and/or documented as non supported.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently the HOME environment is set to /root if
the user does not override it.
Also walk the parent directories of users homedir
to see if it is volume mounted into the container,
if yes, then set it correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* system df
* events
* fix error handling from go routine
* update tests to use gomega matchers for better error messages
* system info
* version
* volume inspect
Signed-off-by: Jhon Honce <jhonce@redhat.com>
We were only including the CNI Network fields in the output of
`podman inspect` when the container was not running. It's simple
enough to fix (populate with empty structs, since we can't fill
anything without a CNI response to get IP address assigned, etc).
This is necessary for Docker compatibility.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
