Also create one constant for ErrDuplicateDest, rather then have the same
value set three times.
Fixes: https://github.com/containers/podman/issues/4217
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Basically, in the timeout loop where we checked for new CID
on the restarted container, we were running 'podman inspect'
(not 'inspect --format ID'), and comparing full hundred-line
output against single-line CID string.
While I'm in here, add 'c_' prefix to container to make it
easier for my old eyes to recognize "oh, that's a container name"
vs "is that a name? a SHA? a woozle?"
Signed-off-by: Ed Santiago <santiago@redhat.com>
Fix the "stop" on-failure action by not removing the transient systemd
timer and service during container stop. Removing the service will
in turn cause systemd to terminate the Podman process attempting to
stop the container and hence leave it in the "stopping" state.
Instead move the removal into the restart sequence.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the on-failure actions only kick in once the health check
has passed its retries. Also fix race conditions on reading/writing the
log.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Include the digest of the image in `podman container inspect`. The image
digest is a key information for auditing as it defines the identify of
an image. This way, it can be determined whether a container used an
image with a given CVE etc.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
I see no reason to block --network host with kube play and force users
to have to set it in the yaml file.
This is just confusing when compared to the other podman create/run
--network options, see discussion in #15945.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I was testing --log-level by --storage-opt=mount_program=/bin/false
Stop doing that. It's just constantly breaking everything (#15698
and #15977).
I am violently of the opinion that a command-line option must
not destroy a user's system (except for --set-something, --config,
something that makes it very very clear that it is a lasting
change). I seem to be in the minority on this opinion. So, I
give up.
Signed-off-by: Ed Santiago <santiago@redhat.com>
If user does not specify hostPort in a kube.yml file but does specify
a containerPort, then the hostPort should default to the containerPort.
Fixes: https://github.com/containers/podman/issues/15942
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Followup to #15895:
- add a normal-case test, to ensure that --privileged without
systemd continues to pass through /dev/ttyN devices
- explain why we die() if host has no ttyN devices
- I find grep -vx slightly easier to read than sed backslash-slash
- run cleanup with '-t 0', to shave ten seconds from CI run
Signed-off-by: Ed Santiago <santiago@redhat.com>
Auto updates using the "registry" policy require container to be created
with a fully-qualified image reference. Short names are not supported
due the ambiguity of their source registry. Initially, container
creation errored out for non FQN images but it seems that Podman has
regressed.
Fixes: #15879
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Changes since 2022-09-09:
- man page: add --skip-unused-stages (buildah 4249)
- man page: bring in new Note for --cache-ttl (4248)
- system tests: de-stutter (4205)
- (internal): in skip() applier: escape asterisk, otherwise
the "bud with --dns* flags" sed expression never applies.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
According to https://systemd.io/CONTAINER_INTERFACE/, systemd will try take
control over /dev/ttyN if exported, which can cause conflicts with the host's tty
in privileged containers. Thus we will not expose these to privileged containers
in systemd mode, as this is a bad idea according to systemd's maintainers.
Additionally, this commit adds a bats regression test to check that no /dev/ttyN
are present in a privileged container in systemd mode
This fixes https://github.com/containers/podman/issues/15878
Signed-off-by: Dan Čermák <dcermak@suse.com>
Background: in order to add aarch64 tests, we had to add
emergency skips to a lot of failing tests. No attempt was
ever made to understand why they were failing.
Fast forward to today, I filed #15888 just to see if tests
are still failing. Looks like a number of them are fixed.
(Yes, magically). Remove those skips.
See: #15074, #15277
Signed-off-by: Ed Santiago <santiago@redhat.com>
Followup to #15616, which is not usable as it is (way, way, way
too much noise) but actually found a few real nits that should
be fixed.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Alias
podman --context -> podman --connection
podman context use -> podman system connection default
podman context rm -> podman system connection rm
podman context create -> podman system connection add
podman context ls ->podman system connection ls
podman context inspect ->podman system connection ls --json (For
specified connections)
Podman context is a hidden command, but can be used for existing scripts
that assume Docker under the covers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Followup to #15673 (--format with newlines). I cobbled up a test
for it, but I was sloppy, so the test had issues that I kept
having to band-aid. This is a cleaner way to handle podman-machine.
...and, another unexpected surprise with podman stats. It
fails under rootless cgroupsv1. We can't sweep it under the
rug via skip_if_ubuntu because tests will then fail on RHEL8.
So, add a similar mechanism for testing podman stats.
...plus a non-surprise, the 'search' test flakes. Try minimizing
that by searching only $IMAGE. If quay.io is down, other tests
will certainly fail.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Three tests were running 'container rm' on 'start'ed containers
that might not yet have exited. Fix. Also, tighten up the
tests themselves, to make even more sure that they test
what they're supposed to test.
Discovered, in CI, that 'podman-remote logs --timestamps'
was unimplemented. Thanks to @Luap99 for the fix to that.
Fixes: #15783Fixes: #15795
Signed-off-by: Ed Santiago <santiago@redhat.com>
This version does a much better job of error reporting and also catches
more commands.
Changes from edsantiago.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Emit a warning to the user when generating a unit with --new on a
container that was created with a custom --restart policy. As shown
in #15284, a custom --restart policy in that case can lead to issues
on system shutdown where systemd attempts to nuke the unit but Podman
keeps on restarting the container.
Fixes: #15284
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Restart the health-check timers instead of starting them. This will
surpress annoying errors stating that an already running timer cannot be
started anymore.
Also make sure that the transient units/timers are stopped and removed
when stopping a container.
Fixes: #15691
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Now that commit d10e77e1bc is merged, it will reuse the same template
logic as inspect and therefore should just work.
Also remove the FIXME from eds test.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The field was already exposed already in the `system df` output
so this just required a bit of plumbing and testing.
As part of this, fix `podman systemd df` volume in-use logic.
Previously, volumes were only considered to be in use if the
container using them was running. This does not match Docker's
behavior, where a volume is considered in use as long as a
container exists that uses the volume, even if said container is
not running.
Fixes#15720
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
- basic : add actual log-level tests
- events : clean up, add --format tests
- systemd : reorder proxy args for legibility
- auto-update : fix missing timeout that could lead to hang
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman --events-backend none events should return with an error since it
will never be able to actually list events.
Fixes part three of #15688
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman --events-backend file events --stream=false should never hang. The
problem is that our tail library will wait for the file to be created
which makes sense when we do not run with --stream=false. To fix this we
can just always create the file when the logger is initialized. This
would also help to report errors early on in case the file is not
accessible.
Fixes part one from #15688
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman adds an Error: to every error message. So starting an error
message with "error" ends up being reported to the user as
Error: error ...
This patch removes the stutter.
Also ioutil.ReadFile errors report the Path, so wrapping the err message
with the path causes a stutter.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Trying to catch the wiley metacopy flake: add a debug
condition to run_podman, in system tests, to log all
instances in which output includes the metacopy warning.
The idea is to detect the very first time it happens,
and see what is triggering it.
Signed-off-by: Ed Santiago <santiago@redhat.com>
For systems that have extreme robustness requirements (edge devices,
particularly those in difficult to access environments), it is important
that applications continue running in all circumstances. When the
application fails, Podman must restart it automatically to provide this
robustness. Otherwise, these devices may require customer IT to
physically gain access to restart, which can be prohibitively difficult.
Add a new `--on-failure` flag that supports four actions:
- **none**: Take no action.
- **kill**: Kill the container.
- **restart**: Restart the container. Do not combine the `restart`
action with the `--restart` flag. When running inside of
a systemd unit, consider using the `kill` or `stop`
action instead to make use of systemd's restart policy.
- **stop**: Stop the container.
To remain backwards compatible, **none** is the default action.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
