Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the
infra container's conmon process ID to a specified path. Several
container sub-commands already support `--conmon-pidfile` which is
especially helpful to allow for systemd to access and track the conmon
processes. This allows for easily tracking the conmon process of a
pod's infra container.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Allow containers to join an existing pod via the `--pod-id-file` which
is already supported by a number of `podman-pod` subcommands. Also add
tests to make sure it's working and to prevent future regressions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support the `--pod-id-file` flag in the rm, start and stop pod commands.
This completes the already support flag in pod-create and is another
prerequisite for generating generic systemd unit files for pods.
Also add completions, docs and tests.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Two areas needed tweaking to accomplish this: port parsing and
binding ports on the host.
Parsing is an obvious problem - we have to accomodate an IPv6
address enclosed by [] as well as a normal IPv4 address. It was
slightly complicated by the fact that we previously just counted
the number of colons in the whole port definition (a thousand
curses on whoever in the IPv6 standard body decided to reuse
colons for address separators), but did not end up being that
bad.
Libpod also (optionally) binds ports on the host to prevent their
reuse by host processes. This code was IPv4 only for TCP, and
bound to both for UDP (which I'm fairly certain is not correct,
and has been adjusted). This just needed protocols adjusted to
read "tcp4"/"tcp6" and "udp4"/"udp6" based on what we wanted to
bind to.
Fixes#5715
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Unless `--since` or `--until` is specified, `podman events` will stream
new events. Clarify this behavior in the `--help` message and man page
to avoid confusion.
Fixes: #6536
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This is the other command that benefits greatly from being run in
parallel, due to the potential 15-second timeout for containers
that ignore SIGTERM.
While we're at it, also clean up how stop timeout is set. This
needs to be an optional parameter, so that the value set when the
container is created with `--stop-timeout` will be respected.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Systemd enablement has to happen on the server side, since we need
check if the image is running systemd.
Also need to make sure user setting the StopSignal is not overriden on the
server side. But if not set and using systemd, we set it correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This code will run container operations in parallel, up to a
given maximum number of threads. Currently, it has only been
enabled for local `podman rm` as a proof of concept.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We were picking up defaults from the client's containers.conf,
which broke pod namespaces. The server-side code already checks
containers.conf when not explicitly overridden by the user, or by
the container being part of a pod (the last bit being our bug).
This only manifested on systems with a containers.conf installed,
so RHEL 8 and Fedora 32 (which means our F32 CI VMs likely should
have caught it, but didn't, which is concerning).
This prevents defaults for these flags being shown, but they were
incorrect anyways for `podman-remote`, so I'm not terribly
concerned.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Namespace fields were being set with their option names
unless overriden by the user. This was causing issues
with podman-remote on userns.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We need to default to building podman. If you specify no build
tags you will not build podman, not podman-remote.
Just using remote flag to indicate podman-remote and !remote for
podman.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We are currently able to inspect images with
`podman container inspect` and containers with
`podman image inspect` and neither of those seem correct. This
ensures that the appropriate flags, and only the appropriate
flags, are available for each specialized exec, and they can only
inspect the specific type they were intended to.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* podman --remote ssh://<user>:<password>@<host>:<port><path>
* podman --remote ssh://<user>:<password>@<host>:<port><path> \
--identity <path> --passphrase <phrase>
* ssh-add <key>
podman --remote ssh://<user>@<host><path>
* Fix `podman help` to run even if podman missing components
* Prompt for passphrase on stdin IFF key is protected and passphrase
not given via any other configuration
* cobra flags do not support optional value flags therefore refactored
--remote to be a boolean and --url will now contain the URI to Podman
service
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This adds bindings for starting exec sessions, and then uses them
to wire up detached exec. Code is heavily based on Attach code
for containers, slightly modified to handle exec sessions.
Bindings are presently attached-only, detached is pending on a
Conmon update landing in CI. I'll probably get to that next.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
the pod ps man page says .Label is valid go template format. i dont think the function was actually ever implemented.
Fixes#6448
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fix a race in `podman container stats` by waiting for the client to
consume the data in the channel. This requires a `sync.WaitGroup` (or
semaphore) in the client and to also close the channel the backend.
Fixes: #6405
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This is just an alias to the `ro` option, but it's already in the
manpages (and Docker) so we might as well add support for it.
Fixes#6379
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
--container-prefix <string> - default 'container'
Systemd unit name prefix for containers
--pod-prefix <string> - default 'pod'
Systemd unit name prefix for pods
--separator <string> - default '-'
Systemd unit name seperator between name/id and prefix
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* wire up bindings and handler for obtaining logs remotely
* enable debug logging from podman in e2e test using DEBUG and
DEBUG_SERVICE env variables
* Fix error in streaming log frames
* enable remote logs test
Signed-off-by: Jhon Honce <jhonce@redhat.com>
