Allows users to set `--os` , `--arch` and `--variant` of the image
created from the custom import.
Following is useful when user is already aware of the values which are
correct for their generated rootfs
Signed-off-by: Aditya R <arajan@redhat.com>
Make sure we're waiting for the ls container to finish to prevent
potential flakes or future regressions.
Spotted while enabling a linter.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Containers started with `--no-healthcheck` are configured to contain no
healthcheck and test configured as `NONE`. Podman shows wrong status as
such use cases.
Following commit fixes the faulty behavior of stauts field for
containers started with `--no-healthcheck`
Signed-off-by: Aditya R <arajan@redhat.com>
The calculate the percentage we need floating point numbers. The current
code however casted the result of reclaimable/size to an int first.
Casting to an int in go will just discard the decimal points, thus the
result was either 0 or 1 so if multiplied by 100 it would show up as 0%
or 100%.
To fix this we have to multiply by 100 first before casting the result
to an int. Also add a check for div by zero which results in NaN and use
math.Round() to correctly round a number.
Ref #13516
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Update the login tests to reflect the latest changes to allow http{s}
prefixes (again) to address bugzilla.redhat.com/show_bug.cgi?id=2062072.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When podman generate systemd is invoked, it previously did not check if
container-prefix or pod-prefix are empty. When these are empty, the file name
starts with the separator, which is hyphen by default. This results in files
like '-containername.service'.
The code now checks if these prefixes are empty. If they are, the filename no
longer adds a separator. Instead, it uses name or ID of the container or pod.
Closes#13272
Signed-off-by: Nirmal Patel <npate012@gmail.com>
There is a lot of unneeded code, k8s is the by far the biggest
dependency in podman. We should remove as much as possible so that we
only have the stuff left that we use.
This is just a quick skim over the code which removes a lot of the
generated code and many packages that are now unused.
I know that this will be impossible to properly review. I will try to
make smaller changes in follow up work.
Right now this reduces about 8 MB in binary size!!!
[NO NEW TESTS NEEDED] Hopefully existing tests will catch any problems.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We only need a small part of the k8s dependencies but they are the
biggest dependencies in podman by far. Moving them into podman allows us
to remove the unnecessary parts.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
pprof tests are way too flaky, and are causing problems for
community contributors who don't have privs to press Re-run.
There has been no activity or interest in fixing the bug,
and it's not something I can fix. So, just disable the test.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Secret-verify-leak is causing flakes, when running in parallel tests.
This is because remote secrets are copied into the context directory to
send to the API server, and secret-verify-leak is doing a COPY * and
then checking if the temporary secret file ends up in the container or
not. Since all the temporary files are prefixed with
"podman-build-secret", this test checks if podman-build-secret is in the
image. However, when run in parallel with other tests, other temporary
podman-build-secrets might be in the context dir. Moving
secret-verify-leak into its own directory makes sure that the context
dir is used only by this one test.
Also renamed Dockerfile -> Containerfile and cleaned up unused
Containerfiles.
Signed-off-by: Ashley Cui <acui@redhat.com>
The default rule should be set at the head of device configuration.
Otherwise, rules for user devices are overridden by the default rule so
that any access to the user devices are denied.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Error out if the kube yaml passed to play kube has more
than one container or init container with the same name.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
do not attempt to use cgroups with pods if the cgroups are disabled.
A similar check is already in place for containers.
Closes: https://github.com/containers/podman/issues/13411
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
While resolving `workdir` we mostly create a `workdir` when `stat`
fails with `ENOENT` or `ErrNotExist` however following cases are not
true when user explicitly specifies a `workdir` while `running` using
`--workdir` which tells `podman` to only use workdir if its exists on
the container. Following configuration is implicity set with other
`run` mechanism like `podman play kube`
Problem with explicit `--workdir` or similar implicit config in `podman play
kube` is that currently podman ignores the fact that workdir can also be
a `symlink` and actual `link` could be valid.
Hence following commit ensures that in such scenarios when a `workdir`
is not found and we cannot create a `workdir` podman must perform a
check to ensure that if `workdir` is a `symlink` and `link` is resolved
successfully and resolved link is present on the container then we
return as it is.
Docker performs a similar behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
Allow users to commit containers into a single layer.
Usage
```bash
podman container commit --squash <name>
```
Signed-off-by: Aditya R <arajan@redhat.com>
`podman play kube` tries to build images even if `--build` is set to
false so lets honor that and make `--build` , `true` by default so it
matches the original behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
We could remove the container running the volume plugins, before
the containers using the volume plugins; this could cause
unmounting the volumes to fail because the plugin could not be
contacted.
Signed-off-by: Matthew Heon <mheon@redhat.com>
For the since and after imagve filter tests, instead of using the
read-only cache of images, we just use the empty r/w store. We then
build three images that are strictly predictable.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Checkpoint/restore pod tests are not running with an older runc and now
that runc 1.1.0 appears in the repositories it was detected that the
tests were failing. This was not detected in CI as CI was not using runc
1.1.0 yet.
Signed-off-by: Adrian Reber <areber@redhat.com>
The `podman network connect` and `podman network disconnect`
commands give containers access to different networks than the
ones they were created with; these networks can also have DNS
servers associated with them. Until now, however, we did not
modify resolv.conf as network membership changed.
With this PR, `podman network connect` will add any new
nameservers supported by the new network to the container's
/etc/resolv.conf, and `podman network disconnect` command will do
the opposite, removing the network's nameservers from
`/etc/resolv.conf`.
Fixes#9603
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
It seems we are ignoring output from healthcheck session.
Open a valid pipe to healthcheck session in order read its output.
Use common pipe for both `stdout/stderr` since that was the previous
behviour as well.
Signed-off-by: Aditya R <arajan@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
podman system prune should also remove all networks. When we want to
users to migrate to the new network stack we recommend to run podman
system reset. However this did not remove networks and if there were
still networks around we would continue to use cni since this was
considered an old system.
There is one exception for the default network. It should not be removed
since this could cause other issues when it no longer exists. The
network backend detection logic ignores the default network so this is
fine.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
