The pod was set after we checked the namespace and the namespace code
only checked the --pod flag but didn't consider --pod-id-file option.
As such fix the check to first set the pod option on the spec then use
that for the namespace. Also make sure we always use an empty default
otherwise it would be impossible in the backend to know if a user
requested a specific userns or not, i.e. even in case of a set
PODMAN_USERNS env a container should still get the userns from the pod
and not use the var in this case. Therefore unset it from the default
cli value.
There are more issues here around --pod-id-file and cli validation that
does not consider the option as conflicting with --userns like --pod
does but I decided to fix the bug at hand and don't try to fix the
entire mess which most likely would take days.
Fixes#22931
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Do not return 200 status code before we know if there will be an error.
Delay writing the status code until we send the first response. That way
we can set an error code inside the loop when we get a error on the
first try, i.e. because an invalid descriptor was used.
Fixes#22986
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we failed to do anything we should return 500, the 409 code has a
special meaing to the client as it uses a different error format. As
such the remote client was not able to unmarshal the error correctly and
just returned an empty string.
Fixes#22989
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Stop copying the pre-pulled uncompressed machine disk into the individual test dir. The machine pull code already makes a copy of the disk into the test's HOMEDIR/.local/share/containers/podman/machine, and works off that copy.
Before the change: TESTDIR/<image> is copied to TESTDIR/podman_test/<image> by the test, and then podman machine copies the image to TESTDIR/podman_test/.local/share/containers/podman/machine/provider/<image>
After the change: TESTDIR/<image> is copied to TESTDIR/podman_test/.local/share/containers/podman/machine/provider/<image> by podman machine
The image that is actually run is at TESTDIR/podman_test/.local/share/containers/podman/machine/provider/<image> in both instances.
Signed-off-by: Ashley Cui <acui@redhat.com>
When a user specifies a invalid connection in CONTAINER_CONNECTION then
podman should return a proper error saying so. Currently it ignored the
error and in rootFlags() just exited early with defining any flags. This
caused a panic then when trying to use the flags later.
In order to address this first store the connection error in the
PodmanConfig struct and not abort right away during flag setup. This is
important as the user might have specified a flag with a valid remote
connection. As such we check all flags and only when none were given we
return the connection error.
Also while at it I noticed that the default connection reported via
podman --help was wrong as it only used the old containers.conf field
for it and did not consider the podman-connections.json default.
New regression tests have been added to make sure it behaves correctly.
This fixes the problem reported in the PR #22997.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently, when Podman restores a container into a Pod, it always fails
with the following error:
Error: cannot add container f96670b26e53e70f7f451191ea39a093c940c6c48b47218aeeef1396cb860042 to pod h2-pod: no such pod
This error occurs because r.state.Pod() is called in setupContainer()
with the Pod name instead of ID. This patch fixes this problem by
setting ctrConfig.Pod to pod.ID().
Reported-by: Stanislav Kosorin <stanokosorin4@gmail.com>
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
We do a soft stop via systemd to allow graceful shutdown behavior.
Hoewever for unknown reason we are hitting such a case in CI right now.
Regardless of the CI issue we should always to the hard terminate in
such case so only log the timeout as warning.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
First of some commands ignored cmd.Wait() error which means it was
impossible to notice any command errors. And others only returned
the wait error as it which when a command fails is just
`exit status <code>` which is not helpful at all.
This commit should add proper error wrapping with stderr to get useful
strings back hopefully.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
add a new flag that allows to override the pull options configured in
the storage.conf file.
e.g.: --pull-option="enable_partial_images=false" can be specified to
Podman to disable partial pulls even if enabled.
Leave it as a hidden configuration flag for now since the API itself
is marked as experimental in c/storage.
Currently c/storage doesn't honor the overrides, being fixed with
https://github.com/containers/storage/pull/1966
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Switch to using virtiofs by default, and delete the 9p code.
This is structured as a separate patch to make it easier
to revert if need be.
Signed-off-by: Colin Walters <walters@verbum.org>
I'm hitting a bug with 9p when trying to transfer large files.
In RHEL at least 9p isn't supported because it's known to have a
lot of design flaws; virtiofsd is the supported and recommended
way to share files between a host and guest.
Add a new hidden `PODMAN_MACHINE_VIRTFS` environment
variable that can be set to `virtiofs` to switch to virtiofsd.
Signed-off-by: Colin Walters <walters@verbum.org>
When running with "log-level=debug" and libkrun as machine provider,
spawn a Terminal to execute "krunkit" to enable users to have full
access to the VMs console for debugging purposes.
Users obtain an interactive, text console with scrollback. It's possible
to interact with both the kernel and GRUB2. To obtain even additional
debugging information, users can add "console=hvc0" to the linux kernel
command line through GRUB2 (it may be worth considering extending the
initial configuration of the VM to add that argument by default).
Signed-off-by: Sergio Lopez <slp@redhat.com>
This is a bit weird and I admit I don't understand exactly how the init
value is used but this seems wrong. When podman reexec itself it then
gets the wrong init value and because rootless_uid() will be 0 the
init() function in rootless_linux.go will not set it either because of
that. Thus the first reexec has the wrong env.
Now that I make use of it in c/common[1] this turns out top be a real
issue and is failing all first podman commands. To reproduce make sure
to kill the pause process then just run any podman command with the new
c/common vendor and without this patch.
[1] https://github.com/containers/common/pull/2020
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add a `podman system check` that performs consistency checks on local
storage, optionally removing damaged items so that they can be
recreated.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
The expectation with --cgroups=disabled is that the current cgroup is
used by the container.
Currently the --cgroups=disabled is passed directly to the OCI
runtime, but it doesn't stop Podman from creating a new cgroup when it
doesn't own the current one.
Closes: https://github.com/containers/podman/issues/20910
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
.build files allow to build an image via Quadlet. The keys from a .build
file are translated to arguments of a `podman build` command by Quadlet.
Minimal keys for .build files are `ImageTag=` and a context directory,
see `SetWorkingDirectory=`, or a `File=` pointing to a Containerfile.
After sorting .build files into the Quadlet dependency order, there
remains a possible dependency cycle issue between .volume and .build
files: A .volume can have `Image=some.build`, and a .build can have
`Volume=some.volume:/some/volume`.
We solve this dependency cycle by prefilling resourceNames with all
image names from .build files before converting all the unit files.
This results in an issue for the test suite though: For .volume's
depending on *.image or *.build, we need to copy these additional
dependencies to the test's quadletDir, otherwise the test will fail.
This is necessary, because `handleImageSource()` actually needs to know
the image name defined in the referenced *.{build,image} file. It cannot
fall back on the default names, as it is done for networks or volumes,
for example.
Signed-off-by: Johannes Maibaum <jmaibaum@gmail.com>
Remove deactivated linters from the config as they will be removed in
the future and thorw warnings, all of them were disabled already anyway
so this is no functional change.
Second, fix one new lint warning for fmt.Scanln() error checking.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Previously, the mac podman-machine tests installed rosetta before
executing any tests. As a best-practice (and because the Macs in CI are
shared) tests should never permanently modify the system. As of this
commit, the system setup script used for the CI Macs does the rosetta
installation. Remove the test setup code that installed rosetta and
add a CI-level confirmation that it's been pre-installed.
Signed-off-by: Chris Evich <cevich@redhat.com>
If a container unit starts on boot with a dependency on `default.target`
the image unit may start too soon, before network is ready. This cause
the unit to fail to pull the image.
- Add a dependency on `network-online.target` to make sure image pulls
don't fail.
See https://github.com/containers/podman/issues/21873
- Document the hardcoded dependency on `network-online.target` for images unit
and explain how it can be overriden if necessary.
- tests/e2e/quadlet: Add `assert-last-key-regex`
Required to test the `After=` override in [Unit] section
See https://github.com/containers/podman/pull/22057#issuecomment-2008959993
- quadlet/unitfile: add a prepenUnitLine method
Requirements on networks should be inserted at the top of the
section so the user can override them.
Signed-off-by: jbtrystram <jbtrystram@redhat.com>
In GetDefaultDevices(), make sure MachineConfig has an AppleHypervisor
instance before attempting to access it. This fixes a SIGSEGV when
running with libkrun as machine provider.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Use specV1.AnnotationTitle instead of hard-coding its value when we go
looking for podman-machine images.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
wait for the healthy status on the thread where the container lock is
held. Otherwise, if it is performed from a go routine, a different
thread is used (since the runtime.LockOSThread() call doesn't have any
effect), causing pthread_mutex_unlock() to fail with EPERM.
Closes: https://github.com/containers/podman/issues/22651
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The function that's handing us events will return an error after closing
the channel over which it's sending events, and its caller (in its own
goroutine) will then send that error over another channel.
The logic that started the goroutine is likely to notice that the events
channel is closed before noticing that the error channel has a result
for it to read, so any error that would have been communicated would be
lost.
When we finish reading events, check if the reader returned an error
before telling our caller that there was no error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
