The format used for setting the bind-mount-options annotations
in the kube yaml was incorrect and caused k8s to throw an error
when trying to play the generated kube yaml.
Fix the annotation format to match the rules of k8s.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Change only the compat API, so we don't force a breaking change
on Libpod API users.
Partial fix for #15485
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add three new capabilities that would otherwise be reported as unknown.
Also add an e2e test making sure that `podman top` knows all
capabilities of the current kernel. I refrained from adding a system
test since this may blow up in gating tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
<MH: Fixed cherry-pick conflicts>
Signed-off-by: Matthew Heon <mheon@redhat.com>
the env vars are held in the spec rather than the config, so they need to be mapped manually. They are also of a different format so special handling needed to be added. All env from the parent container will now be passed to the clone.
resolves#15242
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Compat: Treat already attached networks as a no-op
Applies only to containers in created state. Maintain error in running state.
Co-authored-by: Alessandro Rossi <al.rossi87@gmail.com>
Co-authored-by: Brent Baude <bbaude@redhat.com>
Co-authored-by: Jason T. Greene <jason.greene@redhat.com>
Signed-off-by: Alessandro Rossi <al.rossi87@gmail.com>
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Two fixes done in #14972 (the "oops test under runc again" PR
which was not backported into 4.2):
- "survive service stop" - skip. Test is only applicable
under crun.
- "volume exec/noexec" - update the expected error message
One hail-mary fix for a test failure seen in RHEL87 gating:
- "nonexistent labels" - slight tweak to expected error message
None of these fixes will actually be tested in CI, because v4.2
does not run any runc tests. We'll have to wait and see what
happens on the next RHEL build.
Signed-off-by: Ed Santiago <santiago@redhat.com>
if an explicit mapping is specified, do not accept `--userns` since it
overriden to "private".
Closes: https://github.com/containers/podman/issues/15233
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Tying filtering logic for podman stop and start to same place in getContainersAndInputByContext() to reduce code redundancy
Signed-off-by: Karthik Elango <kelango@redhat.com>
This bug is reproduced when we execute the following command:
1. podman manifest add <manifest list> <images exist on local storage>
2. podman manifest push --rm <manifest list> dir:<directory>
If pushing succeeds, it is expected to remove only a manifest list.
However, manifest list remains on local storage and images are removed.
This commit fixes `podman manifest push --rm` to remove only a manifest list.
And, supports `manifest push --rm option` in remote environment,
like host environment.
Fixes: https://github.com/containers/podman/issues/15033
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
This Patch will cause podman COMMAND rm --force bogus not fail
This is how Docker works, so Podman should follow this to allow existing
scripts to convert from Docker to Podman.
Fixes: #14612
Oprignal version of this patch came from wufan 1991849113@qq.com
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Skip some newly added test for remote and modify error output of a test
case which is reporter early in case of podman.
[NO NEW TESTS NEEDED]
[NO TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
- Allow creating sigstore signatures via --sign-by-sigstore-private-key .
Like existing --sign-by, it does not work remote (in this case
because we would have to copy the private key to the server).
- Allow passing a passphrase (which is mandatory for sigstore private keys)
via --sign-passphrase-file; if it is not provided, prompt interactively.
- Also, use that passphrase for --sign-by as well, allowing non-interactive
GPG use. (But --sign-passphrase-file can only be used with _one of_
--sign-by and --sign-by-sigstore-private-key.)
Note that unlike the existing code, (podman build) does not yet
implement sigstore (I'm not sure why it needs to, it seems not to
push images?) because Buildah does not expose the feature yet.
Also, (podman image sign) was not extended to support sigstore.
The test for this follows existing (podman image sign) tests
and doesn't work rootless; that could be improved by exposing
a registries.d override option.
The test for push is getting large; I didn't want to
start yet another registry container, but that would be an
alternative. In the future, Ginkgo's Ordered/BeforeAll
would allow starting a registry once and using it for two
tests.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
... primarily so that it can support OCI artifacts.
2.8 already seems to exist in the repo.
This requires changing WaitContainerReady to also check
stderr (ultimately because docker/distribution was
updated to a more recent sirupsen/logrus, which logs
by default to stderr instead of stdout).
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
... instead of hard-coding a copy of the value.
Notably this makes hack/podman_registry actually
support the documented -i option.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
htpasswd is no longer included in docker.io/library/distribution
after 2.7.0, per https://github.com/docker/distribution-library-image/issues/107 ,
and we want to upgrade to a recent version.
At least system tests currently execute htpasswd from the OS,
so it seems that it is likely to be available.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Probably a result of the Ubuntu images being bumped on Main but
not in this branch. Not worth chasing down exactly what's going
wrong, so let's just disable it.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
for podman pod create, when we are not sharing any namespaces there is no point for the infra container.
This is especially true since resources have also been decoupled from the container recently.
handle this on the cmd level so that we can still create infra if set explicitly
resolves#15048
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Option defaults in API must be the same as in CLI.
```
% podman image push --help
% podman image pull --help
% podman manifest push --help
% podman image search --help
```
All of these CLI commands them have --tls-verify=true by default:
```
--tls-verify require HTTPS and verify certificates when accessing the registry (default true)
```
As for `podman image build`, it doesn't have any means to control
`tlsVerify` parameter but it must be true by default.
Signed-off-by: Vladimir Kochnev <hashtable@yandex.ru>
Some refer to issues that are closed. Remove them.
Some are runc bugs that will never be fixed. Say so, and remove
the FIXME.
One (bps/iops) should probably be fixed. File an issue for it, and
update comment to include the issue# so my find-obsolete-skips script
can track it.
And one (rootless mount with a "kernel bug?" comment) is still
not fixed. Leave the skip, but add a comment documenting the symptom.
Signed-off-by: Ed Santiago <santiago@redhat.com>
I honestly do not understand all this extra option parsing here but
there is really no reason to exclude the option for remote, all the
other global options are also set there.
This fixes a problem with mixed cni/netavark use because the option was
unset.
Fixes#15017
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The network backend always has default config in memory so there is no
need to copy it. Also netavark cannot use it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Docker uses "bridge" as default network name so some tools expect this
to work with network list or inspect. To fix this we change "bridge" to
the podman default ("podman") name.
Fixes#14983
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman-remote push` has shown absolutely no progress at all. Fix that
by doing essentially the same as the remote-pull code does.
The get-free-out-of-jail-card for backwards compatibility is to let the
`quiet` parameter default to true. Since the --quioet flag wasn't
working before either, older Podman clients do not set it.
Also add regression tests to make sure we won't regress again.
Fixes: #11554Fixes: #14971
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
By vendoring the fixes from containers/image. Also add a test (thanks
@edsantiago) to make sure we won't regress in the future again.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Update the init container type default to once instead
of always to match k8s behavior.
Add a new annotation that can be used to change the init
ctr type in the kube yaml.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Followup to #14957, which added a new test that doesn't
actually belong in the 250-systemd.bats file. It was
copy-pasted from another test that doesn't belong there.
Move both tests to a new .bats file, because (1) they
need a custom cleanup, and (2) one of the tests should
very definitely run under podman-remote, and the 250
bats file has a global skip_if_remote().
Signed-off-by: Ed Santiago <santiago@redhat.com>
As you run --sync, please update this commit message with your
actual changes.
Changes since 2022-06-14:
- apply-podman-deltas: (minor) buildah 4057 changed the name
of a test; make corresponding change here
- apply-podman-deltas: buildah 4071 adds a new OCI-hook
test that's failing in remote. Skip it.
- apply-podman-deltas: buildah 4096 changed an error message
- apply-podman-deltas: buildah 4097 added a test that doesn't
work with podman-remote
- run-buildah-bud-tests: only run 'sudo --validate' if we
need to sudo later (for running tests). Otherwise, same
thing: I run the treadmill script, step away, and come
back to an unnecessary sudo prompt.
- system tests: the new containers-storage changes some
error messages; fix tests to reflect that. (And, unrelated,
fix a red cleanup warning)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Docker supports -H and --host for specify the listening socket. Podman
should support them also in order to match the CLI.
These will not be documented since Podman defaults to using the
--url option.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
I added the shorthand option for `podman pull --all-tags`. Like Docker,
Podman can now do `podman pull -a`.
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Filter flag is added for podman stop and podman --remote stop. Filtering logic is implemented in
getContainersAndInputByContext(). Start filtering can be manipulated to use this logic as well to limit redundancy.
Signed-off-by: Karthik Elango <kelango@redhat.com>
As part of fix for https://github.com/openshift/imagebuilder/issues/231
`FROM` does not expands `ARGS` which are not declared so
`TARGETPLATFORM`
Note: I think a patch should be added at imagebuilder to allow using
inbuilt ARGS in FROM without declaring it as well but it is something
to be discussed so lets declare it manually in our tests
[NO NEW TESTS NEEDED]
[NO TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
* Correct spelling and typos.
* Improve language.
Co-authored-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
