We can vendor the test dependencies such as go-md2man, git-validation
and goimports. This allows us to always install the same version as
specified in go.mod. Also we do not rely on a network connection for
this.
The advantage with this method is that dependabot will also update the
dependencies for us and we do not have to hardcode versions in the
Makefile.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Unless specified in the create command of the pod, enforce the exit
policy to "stop". With "stop", a pod is stopped when the last container
exits and does not continue running. This behavior integrates much
better into systemd which is now able to tell whether the service
running as pod is actually running/active or not.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Situation encountered just now after buildah #3949 but
before podman #14084: go.mod changed in such a way that
other modules were updated, not just buildah, and those
changes weren't git-added by 'make vendor'. This resulted
in the dirty-tree CI test failing.
Solution: check for untracked vendor files after 'make vendor',
and git-add them. Show a friendly message that we're doing so:
+---> Adding untracked files under containers/image, containers/storage, klauspost/compress, x/sys
In order to do this safely, we run an untracked-files check
under vendor as one of the first sanity checks. If there are
any when we start the script, fail early.
Signed-off-by: Ed Santiago <santiago@redhat.com>
In support of podman machine and its counterpart desktop, we have added
new stats to podman info.
For storage, we have added GraphRootAllocated and GraphRootUsed in
bytes.
For CPUs, we have added user, system, and idle percents based on
/proc/stat.
Fixes: #13876
Signed-off-by: Brent Baude <bbaude@redhat.com>
Major revamp: instead of stacking a vendor commit on top of
the treadmill changes, do it the other way around: vendor,
then apply treadmill diffs.
Reason: the build-all-new-commits test. Sigh. It fails in the
common case where our treadmill changes include a new struct
element in cmd/podman/images/build.go
Why this is good: well, superficially, it's more intuitive.
Why this is horrible: omg the rebasing games are a nightmare.
When the vendor commit is on top (HEAD), it's ultra-trivial
to drop it, rebase the treadmill changes on main, then add
a new vendor-buildah commit on top. As you can see from the
diffs in this PR, treadmill-as-HEAD introduces all sorts
of complex dance steps in which things can go catastrophically
wrong and you can lose all your treadmill patches. I try very
hard to prevent this, and to offer hints if there's a problem,
and heck in the worst case it's still git so it's still possible
to find lost commits... but it's still much riskier than the
old way.
Alternative I considered: using sed magic to disable the
build-all-new-commits test. So tempting... but that would
also disable the bloat check.
Signed-off-by: Ed Santiago <santiago@redhat.com>
go get is deprecated, we should use go install instead.
Also for some reason go get -u golang.org/x/tools/cmd/goimports is
broken at the moment, thus failing CI jobs where we have to install
this. Switching to go install seems to fix it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the notion of an "exit policy" to a pod. This policy controls the
behaviour when the last container of pod exits. Initially, there are
two policies:
- "continue" : the pod continues running. This is the default policy
when creating a pod.
- "stop" : stop the pod when the last container exits. This is the
default behaviour for `play kube`.
In order to implement the deferred stop of a pod, add a worker queue to
the libpod runtime. The queue will pick up work items and in this case
helps resolve dead locks that would otherwise occur if we attempted to
stop a pod during container cleanup.
Note that the default restart policy of `play kube` is "Always". Hence,
in order to really solve #13464, the YAML files must set a custom
restart policy; the tests use "OnFailure".
Fixes: #13464
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Since networks must always be read from the db bucket directly we should
unset them in config to avoid caller from accidentally using them.
I already tried this but it didn't work because the networks were unset
after the config was marshalled.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
More safety checks for the treadmill script:
* for --sync:
- issue warning if HEAD is not a vendor commit
- if run-buildah-bud-tests fails, leave the working dir
for user to investigate. And offer a long helpful warning.
- tweak .cirrus.yml so buildah-bud tests run early, so
we can fail early. (Remember, the top commit will never
ever ever ever be merged)
* for --pick:
- check branch merge-base (of your vendor-update branch),
compare against that of the treadmill PR. If treadmill
is newer, bail, and suggest rebasing. This would've
saved us some time in #14005.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When a container is run in the host network namespace we have to keep
the same resolv.conf content and not use the systemd-resolve detection
logic.
But also make sure we still allow --dns options.
Fixes#14055
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The files /etc/hosts, /etc/hostname and /etc/resolv.conf should always
be owned by the root user in the container. This worked correct for
/etc/hostname and /etc/hosts but not for /etc/resolv.conf.
A container run with --userns keep-id would have the reolv.conf file
owned by the current container user which is wrong.
Consolidate some common code in a new helper function to make the code more
cleaner.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Since the decoder is shared registering the decoder inside a single
endpoint will also register it for all others. Also the problem with
that is the it will register it everytime this endpoint is called which
is wrong.
Instead we should register it once like the other custom decoder
functions.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The test has been broken since it was added 4 years ago. Instead of
using hardcoded paths we should use tmp files.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It solves a race where a container cleanup process launched because of
the container process exiting normally would hang.
It also solves a problem when running as rootless on cgroup v1 since
it is not possible to force pids.max = 1 on conmon to limit spawning
the cleanup process.
Partially copied from https://github.com/containers/podman/pull/13403
Related to: https://github.com/containers/podman/issues/14057
[NO NEW TESTS NEEDED] it doesn't add any new functionality
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
I was asked to refactor machine inspect output to represent more common
and basic information. machine inspect now has information that would
be appropriate for different machines.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
`pod.CgroupPath()` currently includes a codepath that is never accessed,
which is supposed to start the infra ctr and obtain the cgroup path from there
that is never necessary/safe because p.state.CgroupPath is never empty
[NO NEW TESTS NEEDED]
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
podman image search accepts a go template, we can use the same shell
completion logic which is used everywhere else in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
For the AutocompleteFormat function we expect the correct template
struct which is used in the golang template. The function can handle
both struct and pointer to a struct. Using the reference is more
efficient since it doe snot have to copy the whole struct.
Also change some structs to use he actual type from the template instead
of some nested one to make sure it has to correct fields.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It used the wrong struct so not all fields were listed in the
completion.
Fixes podman images --format and podman image history --format
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
