When a container is run in the host network namespace we have to keep
the same resolv.conf content and not use the systemd-resolve detection
logic.
But also make sure we still allow --dns options.
Fixes#14055
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The files /etc/hosts, /etc/hostname and /etc/resolv.conf should always
be owned by the root user in the container. This worked correct for
/etc/hostname and /etc/hosts but not for /etc/resolv.conf.
A container run with --userns keep-id would have the reolv.conf file
owned by the current container user which is wrong.
Consolidate some common code in a new helper function to make the code more
cleaner.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we connect or disconnect from a network we also have to update
/etc/hosts to ensure we only have valid entries in there.
This also fixes problems with docker-compose since this makes use of
network connect/disconnect.
Fixes#12533
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we lookup the hostname for a given container we have to check if
the container is joined to another utsns and use this hostname then
instead.
This fixes a problem where the `hostname` command would use the correct
name but /etc/hostname would contain a different name.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use the new logic from c/common to create the hosts file. This will help
to better allign the hosts files between buildah and podman.
Also this fixes several bugs:
- remove host entries when container is stopped and has a netNsCtr
- add entries for containers in a pod
- do not duplicate entries in the hosts file
- use the correct slirp ip when an userns is used
Features:
- configure host.containers.internal entry in containers.conf
- configure base hosts file in containers.conf
Fixes#12003Fixes#13224
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
From a security point of view, it would be nice to be able to map a
rootless usernamespace that does not use your own UID within the
container.
This would add protection against a hostile process escapping the
container and reading content in your homedir.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Problem: the system test 'is()' checker was poorly thought out.
For example, there is no way to check for inequality or for
absence of a substring.
Solution, step 1: introduce new assert(), copied almost verbatim
from buildah, where it has been successful in addressing the
gaps in is().
The logical next step is to search the tests for 'die' and
for 'run', looking for negative assertions which we can
replace with assert(). There were a lot, and in the process
I found a number of ugly bugs in the tests themselves. I've
taken the liberty of fixing these.
Important note: at this time we have both assert() and is().
Replacing all instances of is() would be impossible to review.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The slirp4netns port forwarder was not updated to make use of the new
port format. This results in a problem when port ranges are used since
it does not read the range field from the port.
Update the logic to iterate through all ports with the range and
protocols. Also added a system test for port ranges with slirp4netns,
rootlesskit and the bridge network mode.
Fixes#13643
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Append the podman dns seach domain to the host search domains when we
use the dnsname/aardvark server. Previously it would only use podman
seach domains and discard the host domains.
Fixes#13103
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This reverts commit a1bc8cb52c.
Please see resolv.conf(5) search domains must be on the same line. If
you use multiple seach key words only the last one is used. I tested this
with alpine and it works correctly when they are on the same line so I
am not sure what issues Dan had with it but this is not correct.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Alpine does not seem to use search correctly when there are multiple
search domains on the same line. It only uses the first with the advent.
When podman runs within a separate network we are appending on
dns.podman as a search, if you add a search domain, then this causes the
local search on network to fail.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add first non localhost ipv4 of all host interfaces as destination
for host.contaners.internal for rootless containers.
Fixes: https://github.com/containers/podman/issues/12000
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The new network backend stores the networks in a map so the returned
order is not deterministic. Lets sort the network names alphabetically
to ensure a deterministic order.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Followup to #12229, in which I added a podman unshare for
flake debugging. Turns out that doesn't work in podman-remote.
It was not caught because CI doesn't run podman-remote rootless.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When run as rootless the podman network reload command tries to reload
the rootlessport ports because the childIP could have changed.
However if the containers has no ports we should skip this instead of
printing a warning.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
A rootless container created with a custom userns and forwarded ports
did not work. I refactored the network setup to make the setup logic
more clear.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
- remove 'NO TESTS NEEDED' as a valid bypass string. Henceforth
only 'NO NEW TESTS NEEDED' will work.
- add a debugging aid for #11871, in which bodhi tests time out
in nslookup.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Volume test: add a sequence of stat()s to confirm that volumes
are mounted as a different device than root.
Network test: add debugging code for #11825 (dnsmasq inotify
failure in bodhi only).
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fix day-one sloppiness: when I first wrote this framework
it compared strings using 'expr', not '=', to be more
forgiving of extra cruft in output. This was a bad decision.
It means that warnings or additional text are ignored:
is "all is ok, NOT!" "all is ok" <-- this would pass
Solution: tighten up the 'is' check. Use '=' (direct
compare) first. If it fails, look for wild cards ('*')
or character classes ('[') in the expect string. If
so, and only then, use 'expr'. And, thanks to a clever
suggestion from Luap99, include '(using expr)' in the
error message when we do so; this could make it easier
for a developer to understand a string mismatch.
This change exposes a lot of instances in which we weren't
doing proper comparisons. Fix those. Thankfully, there
weren't as many as I'd feared.
Also, and completely unrelated, add '-T' flag to bats
helper, for showing timing results. (I will open this
as a separate PR if requested. I too find it offensive
to jumble together unrelated commits.)
Signed-off-by: Ed Santiago <santiago@redhat.com>
This matches what docker does. Also make sure the net aliases are also
shown when the container is stopped.
docker-compose uses this special alias entry to check if it is already
correctly connected to the network. [1]
Because we do not support static ips on network connect at the moment
calling disconnect && connect will loose the static ip.
Fixes#11748
[1] 0bea52b18d/compose/service.py (L663-L667)
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make use of the new network interface in libpod.
This commit contains several breaking changes:
- podman network create only outputs the new network name and not file
path.
- podman network ls shows the network driver instead of the cni version
and plugins.
- podman network inspect outputs the new network struct and not the cni
conflist.
- The bindings and libpod api endpoints have been changed to use the new
network structure.
The container network status is stored in a new field in the state. The
status should be received with the new `c.getNetworkStatus`. This will
migrate the old status to the new format. Therefore old containers should
contine to work correctly in all cases even when network connect/
disconnect is used.
New features:
- podman network reload keeps the ip and mac for more than one network.
- podman container restore keeps the ip and mac for more than one
network.
- The network create compat endpoint can now use more than one ipam
config.
The man pages and the swagger doc are updated to reflect the latest
changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a container is automatically restarted due its restart policy and
the container uses rootless cni networking with ports forwarded we have
to start a new rootlessport process since it exits with conmon.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a host uses systemd-resolved but not the resolved stub resolver the
following symlinks are created: `/etc/resolv.conf` ->
`/run/systemd/resolve/stub-resolv.conf` -> `/run/systemd/resolve/resolv.conf`.
Because the code uses filepath.EvalSymlinks we put the new resolv.conf
to `/run/systemd/resolve/resolv.conf` but the `/run/systemd/resolve/stub-resolv.conf`
link does not exists in the mount ns.
To fix this we will walk the symlinks manually until we reach the first
one under `/run` and use this for the resolv.conf file destination.
This fixes a regression which was introduced in e73d482990.
Fixes#11222
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The rootlessport forwarder requires a child IP to be set. This must be a
valid ip in the container network namespace. The problem is that after a
network disconnect and connect the eth0 ip changed. Therefore the
packages are dropped since the source ip does no longer exists in the
netns.
One solution is to set the child IP to 127.0.0.1, however this is a
security problem. [1]
To fix this we have to recreate the ports after network connect and
disconnect. To make this work the rootlessport process exposes a socket
where podman network connect/disconnect connect to and send to new child
IP to rootlessport. The rootlessport process will remove all ports and
recreate them with the new correct child IP.
Also bump rootlesskit to v0.14.3 to fix a race with RemovePort().
Fixes#10052
[1] https://nvd.nist.gov/vuln/detail/CVE-2021-20199
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Wow did I screw up. #10982 introduced (at my suggestion) a
new wait_for_port() helper, with the goal of eliminating a
race condition. It didn't work.
First: wait_for_port() tests by connecting to the port, which
is a Bad Idea when you have a one-shot server that exits upon
the first connection closing. We should've caught that, but:
Second: I wrote wait_for_port() for a non-BATS test framework,
and used the conventional file descriptor 3. BATS uses fd3
for internal control. Overriding that made the test silently
just disappear, no "not ok" message, no warnings, nothing
except vanishing into the ether.
Third: this was caught by my log-colorizer script, which
loudly yelled "WARNING: expected 234" (tests) at the
bottom of the log. Unfortunately, since this wasn't
my PR, I didn't actually look at the test logs.
Solution: we can't use wait_for_port() in the network port
test. Use wait_for_output() instead, triggering on the
'listening' message emitted by netcat in the container.
Also: fix wait_for_port() to use fd5 instead of 3. Although
no code currently uses wait_for_port() as of this PR, it's
a useful helper that we may want to keep.
Signed-off-by: Ed Santiago <santiago@redhat.com>
It was observed during periodic testing, this test can fail due to the
container process being not fully running and listening on the expected
port:
```
[+1069s] not ok 220 podman networking: port with --userns=keep-id
[+1069s] # (in test file test/system/500-networking.bats, line 144)
[+1069s] # `echo "$teststring" | nc 127.0.0.1 $myport' failed
[+1069s] # # /var/tmp/go/src/github.com/containers/podman/bin/podman rm
--all --force
[+1069s] # # /var/tmp/go/src/github.com/containers/podman/bin/podman ps
--all --external --format {{.ID}} {{.Names}}
[+1069s] # # /var/tmp/go/src/github.com/containers/podman/bin/podman
images --all --format {{.Repository}}:{{.Tag}} {{.ID}}
[+1069s] # quay.io/libpod/testimage:20210610 9f9ec7f2fdef
[+1069s] # # /var/tmp/go/src/github.com/containers/podman/bin/podman run
-d --userns=keep-id -p 127.0.0.1:54322:54322
quay.io/libpod/testimage:20210610 nc -l -n -v -p 54322
[+1069s] #
252c562c9a3c96892d867d1d72fb52b2efdfe62855ebedbccd2d281c472c2988
[+1069s] # Ncat: No route to host.
```
Fix this by using a new `wait_for_port()` function (thanks @edsantiago)
before attempting to communicate with the service.
Signed-off-by: Chris Evich <cevich@redhat.com>
On EOF of STDIN, we need to perform a one-sided close of the
attach connection on the client side, to ensure that STDIN
finishing will also cause the exec session to terminate, instead
of hang.
Fixes#7360
Signed-off-by: Matthew Heon <mheon@redhat.com>
The container name should have the slirp interface ip set in /etc/hosts
and not the gateway ip. Commit c8dfcce6db introduced this regression.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1972073
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The containers /etc/resolv.conf allways preserved the ipv6 nameserves
from the host even when the container did not supported ipv6. Check
if the cni result contains an ipv6 address or slirp4netns has ipv6
support enabled and only add the ipv6 nameservers when this is the case.
The test needs to have an ipv6 nameserver in the hosts /etc/hosts but we
should never mess with this file on the host. Therefore the test is
skipped when no ipv6 is detected.
Fixes#10158
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
selinux-policy-34.9-1.fc34 breaks a behavior we've relied on
since (at least) January 2020:
- Revert "Add permission open to files_read_inherited_tmp_files()
interface"
That's probably the correct thing to do, but it breaks our
existing tests. Solution: add ':Z' where needed.
Tested on Ed's laptop, which has the offending selinux-policy
as of 2021-05-31. Tests pass root and rootless. (I mention
this because tests will obviously pass in CI, which has a
much older selinux-policy).
Also: add a 'podman rmi' for cleanup in one test, to avoid
noise in test logs.
Fixes: #10522
Signed-off-by: Ed Santiago <santiago@redhat.com>
This change adds the entry `host.containers.internal` to the `/etc/hosts`
file within a new containers filesystem. The ip address is determined by
the containers networking configuration and points to the gateway address
for the containers networking namespace.
Closes#5651
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
Allow podman network reload to be run as rootless user. While it is
unlikely that the iptable rules are flushed inside the rootless cni
namespace, it could still happen. Also fix podman network reload --all
to ignore errors when a container does not have the bridge network mode,
e.g. slirp4netns.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The added test in 30544f225e is flaking. Podman inspect is always
working so we have to check the pid instead.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When a container is automatically restarted due its restart policy and
the container used the slirp4netns netmode, the slirp4netns process
died. This caused the container to lose network connectivity.
To fix this we have to start a new slirp4netns process.
Fixes#8047
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Basically, add 'podman wait' before 'podman rm'. See if this
fixes gating tests run on ppc64le (possibly very very slow hosts)
Signed-off-by: Ed Santiago <santiago@redhat.com>
The source ip for the rootlesskit port forwarder was hardcoded to the
standard slirp4netns ip. This is incorrect since users can change the
subnet used by slirp4netns with `--network slirp4netns:cidr=10.5.0.0/24`.
The container interface ip is always the .100 in the subnet. Only when
the rootlesskit port forwarder child ip matches the container interface
ip the port forwarding will work.
Fixes#9828
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
