Disable the args requirement of `image load`. Instead of requiring a
lower bound, we really need an upper one with at most 1 argument.
Extend the system tests to prevent future regressions.
Fixes: #6718
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The `--privileged` flag does not conflict with `--group-add`
(this one was breaking Toolbox) and does not conflict with most
parts of `--security-opt` (this was breaking Openstack).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This was lost during the Podman 2.0 migration. Turns out to be a
very easy fix, fortunately - we want to use the environment var
if not explicitly overridden.
Fixes#6705
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Previously, if an image was tagged with the format
$REGISTRY:$PORT/$REPO:$TAG,
then `podman images` would display $PORT/$REPO:$TAG under the "TAG"
field.
This commit correctly displays $REGISTRY:$PORT/$REPO under the
"REPOSITORY" field while the "TAG" field only displays $TAG.
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
Fixes: gh#6665
Pretty print the JSON output when listing images. We regressed on that
during v2 development. The indentation is now identical to the one of
Podman v1.9.3.
Fixes: #6687
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
These were part of Podman v1.9, but were lost in the transition
to using Specgen to create containers. Most resource limits are
checked via the sysinfo package to ensure they are safe to use
(the cgroup is mounted, kernel support is present, etc) and
removed if not safe. Further, bounds checks are performed to
ensure that values are valid.
Ensure these warnings are printed client-side when they occur.
This part is a little bit gross, as it happens in pkg/infra and
not cmd/podman, which is largely down to how we implemented
`podman run` - all the work is done in pkg/infra and it returns
only once the container has exited, and we need warnings to print
*before* the container runs. The solution here, while inelegant,
avoid the need to extensively refactor our handling of run.
Should fix blkio-limit warnings that were identified by the FCOS
test suite.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This started as a small fix to `podman inspect` where a container
and image, with the same name/tag, were present, and
`podman inspect` was run on that name. `podman inspect` in 1.9
(and `docker inspect`) will give you the container; in v2.0, we
gave the image. This was an easy fix (just reorder how we check
for image/container).
Unfortunately, in the process of testing this fix, I determined
that we regressed in a different area. When you run inspect on
a number of containers, some of which do not exist,
`podman inspect` should return an array of inspect results for
the objects that exist, then print a number of errors, one for
each object that could not be found. We were bailing after the
first error, and not printing output for the containers that
succeeded. (For reference, this applied to images as well). This
required a much more substantial set of changes to properly
handle - signatures for the inspect functions in ContainerEngine
and ImageEngine, plus the implementations of these interfaces,
plus the actual inspect frontend code needed to be adjusted to
use this.
Fixes#6556
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add a `--replace` flag to the `pod create` command. If another pod with
the same name already exists, it will be replaced and removed.
Adding this flag is motivated by #5485 to make running Podman in systemd
units (or any other scripts/automation) more robust. In case of a
crash, a pod may not be removed by a sytemd unit anymore. The
`--replace` flag allows for supporting crashes.
Note that the `--replace` flag does not require the `--name` flag to be
set, so it can be set unconditionally in `podman generate systemd`.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a `--replace` flag to the `container {create,run}` commands.
If another container with the same name already exists, it will
be replaced and removed.
Adding this flag is motivated by #5485 to make running Podman in systemd
units (or any other scripts/automation) more robust. In case of a
crash, a container may not be removed by a sytemd unit anymore. The
`--replace` flag allows for supporting crashes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the
infra container's conmon process ID to a specified path. Several
container sub-commands already support `--conmon-pidfile` which is
especially helpful to allow for systemd to access and track the conmon
processes. This allows for easily tracking the conmon process of a
pod's infra container.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Allow containers to join an existing pod via the `--pod-id-file` which
is already supported by a number of `podman-pod` subcommands. Also add
tests to make sure it's working and to prevent future regressions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support the `--pod-id-file` flag in the rm, start and stop pod commands.
This completes the already support flag in pod-create and is another
prerequisite for generating generic systemd unit files for pods.
Also add completions, docs and tests.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Two areas needed tweaking to accomplish this: port parsing and
binding ports on the host.
Parsing is an obvious problem - we have to accomodate an IPv6
address enclosed by [] as well as a normal IPv4 address. It was
slightly complicated by the fact that we previously just counted
the number of colons in the whole port definition (a thousand
curses on whoever in the IPv6 standard body decided to reuse
colons for address separators), but did not end up being that
bad.
Libpod also (optionally) binds ports on the host to prevent their
reuse by host processes. This code was IPv4 only for TCP, and
bound to both for UDP (which I'm fairly certain is not correct,
and has been adjusted). This just needed protocols adjusted to
read "tcp4"/"tcp6" and "udp4"/"udp6" based on what we wanted to
bind to.
Fixes#5715
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Unless `--since` or `--until` is specified, `podman events` will stream
new events. Clarify this behavior in the `--help` message and man page
to avoid confusion.
Fixes: #6536
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This is the other command that benefits greatly from being run in
parallel, due to the potential 15-second timeout for containers
that ignore SIGTERM.
While we're at it, also clean up how stop timeout is set. This
needs to be an optional parameter, so that the value set when the
container is created with `--stop-timeout` will be respected.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Systemd enablement has to happen on the server side, since we need
check if the image is running systemd.
Also need to make sure user setting the StopSignal is not overriden on the
server side. But if not set and using systemd, we set it correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This code will run container operations in parallel, up to a
given maximum number of threads. Currently, it has only been
enabled for local `podman rm` as a proof of concept.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We were picking up defaults from the client's containers.conf,
which broke pod namespaces. The server-side code already checks
containers.conf when not explicitly overridden by the user, or by
the container being part of a pod (the last bit being our bug).
This only manifested on systems with a containers.conf installed,
so RHEL 8 and Fedora 32 (which means our F32 CI VMs likely should
have caught it, but didn't, which is concerning).
This prevents defaults for these flags being shown, but they were
incorrect anyways for `podman-remote`, so I'm not terribly
concerned.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Namespace fields were being set with their option names
unless overriden by the user. This was causing issues
with podman-remote on userns.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We need to default to building podman. If you specify no build
tags you will not build podman, not podman-remote.
Just using remote flag to indicate podman-remote and !remote for
podman.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
