podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
Remove hard code use of the DefaultInfraImage and rely on
getting this from containers.conf.
Fixes: https://github.com/containers/podman/issues/12771
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
It has been deprecated and is no longer supported. Fully remove it and
only print a warning if a user uses it.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2011695
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2030599
When you create pod, it shares the UTS namespace with Containers.
Currently the --hostname is not passed to the pod created when
you create a container and pod in the same command.
Also fix error message on supported --share flags
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
'--memory-swappiness=0' used to work. This patch fixes the regression
issue, which was caused by the change of infra container creation
process.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Make sure that the value is only set if specified on the CLI. c/image
already defaults to true but if set in the system context, we'd skip
settings in the registries.conf.
Fixes: #11933
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
So far, the infra containers of pods required pulling down an image
rendering pods not usable in disconnected environments. Instead, build
an image locally which uses local pause binary.
Fixes: #10354
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Users can set --pids-limit to -1 now to set unlimited
pids limit for a container - this matches the convention.
[NO TESTS NEEDED]
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
it allows to pass the current std streams down to the container.
conmon support: https://github.com/containers/conmon/pull/289
[NO TESTS NEEDED] it needs a new conmon.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
When `--pod-id-file` is used do not parse the default network namespace
and let specgen handle it instead.
This regression was introduced in commit 7ef3981abe.
Fixes#11303
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
after the init containers pr merged, it was suggested to use `once`
instead of `oneshot` containers as it is more aligned with other
terminiology used similarily.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
this is the first pass at implementing init containers for podman pods.
init containersare made popular by k8s as a way to run setup for pods
before the pods standard containers run.
unlike k8s, we support two styles of init containers: always and
oneshot. always means the container stays in the pod and starts
whenever a pod is started. this does not apply to pods restarting.
oneshot means the container runs onetime when the pod starts and then is
removed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
The global flag will work in either location, and this flag just breaks
users expectations, and is basically a noop.
Also fix global storage-opt so that podman-remote can use it.
[NO TESTS NEEDED] Since it would be difficult to test in ci/cd.
Fixes: https://github.com/containers/podman/issues/10264
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for --pid flag. User can specify ns:file, pod, private, or host.
container returns an error since you cannot point the ns of the pods infra container
to a container outside of the pod.
Signed-off-by: cdoern <cdoern@redhat.com>
Added logic and handling for two new Podman pod create Flags.
--cpus specifies the total number of cores on which the pod can execute, this
is a combination of the period and quota for the CPU.
--cpuset-cpus is a string value which determines of these available cores,
how many we will truly execute on.
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Much to my regret, there is a number of images in the wild with invalid
platforms breaking the platform checks in libimage that want to make
sure that a local image is matching the expected platform.
Imagine a `podman run --arch=arm64 fedora` with a local amd64 fedora
image. We really shouldn't use the local one in this case and pull down
the arm64 one.
The strict platform checks in libimage in combination with invalid
platforms in images surfaced in Podman being able to pull an image but
failing to look it up in subsequent presence checks. A `podman run`
would hence pull such an image but fail to create the container.
Support images with invalid platforms by vendoring the latest HEAD from
containers/common. Also remove the partially implemented pull-policy
logic from Podman and let libimage handle that entirely. However,
whenever --arch, --os or --platform are specified, the pull policy will
be forced to "newer". This way, we pessimistically assume that the
local image has an invalid platform and we reach out to the registry.
If there's a newer image (i.e., one with a different digest), we'll pull
it down.
Please note that most of the logic has either already been implemented
in libimage or been moved down which allows for removing some clutter
from Podman.
[NO TESTS NEEDED] since c/common has new tests. Podman can rely on the
existing tests.
Fixes: #10648Fixes: #10682
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Using the gvproxy application on the host, we can now port forward from
the machine vm on the host. It requires that 'gvproxy' be installed in
an executable location. gvproxy can be found in the
containers/gvisor-tap-vsock github repo.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO TESTS NEEDED]
This commit cleans up two issues:
* Most commands support all EngineModes so default to that. Let
outlayers declare their intent.
* Use cobra.Annotations to set supported EngineMode. This simplies
instantiating commands as there is now one method to communicate a
commands requirements rather than two.
* Combined aliased commands into one file
* Fixed aliased commands where Args field did not match
* Updated examples in README.md for writing commands
* Remove redundant flag DisableFlagsInUseLine in cobra.Command
initialization.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently we have rootless users who want to leak their groups access
into containers, but this group access is only able to be pushed in by
a hard to find OCI Runtime annotation. This PR makes this option a lot
more visable and hides the complexity within the podman client.
This option is only really needed for local rootless users. It makes
no sense for remote clients, and probably makes little sense for
rootfull containers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
[NO TESTS NEEDED] This PR is mainly documentation and some code cleanup.
Also cleanup and consolidate handling of other hanlding of podman-remote
hidden options.
Fixes: https://github.com/containers/podman/issues/9874
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Since we have no good way to enable this on the server side, we will
just allow it to be set on the client side. This should solve almost all
cases.
Partially fixes: https://github.com/containers/podman/issues/9500
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently podman implements --override-arch and --overide-os
But Podman has made these aliases for --arch and --os. No
reason to have to specify --override, since it is clear what
the user intends.
Currently if the user specifies an --override-arch field but the
image was previously pulled for a different Arch, podman run uses
the different arch. This PR also fixes this issue.
Fixes: https://github.com/containers/podman/issues/8001
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For docker compatibility we need to support --platform
flag.
podman create --platform
podman run --platform
podman pull --platform
Since we have --override-os and --override-arch already
this can be done just by modifying the client to split
the --platform call into os and arch and then pass those
options to the server side.
Fixes: https://github.com/containers/podman/issues/6244
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow automatic generation for shell completion scripts
with the internal cobra functions (requires v1.0.0+).
This should replace the handwritten completion scripts
and even adds support for fish. With this approach it is
less likley that completions and code are out of sync.
We can now create the scripts with
- podman completion bash
- podman completion zsh
- podman completion fish
To test the completion run:
source <(podman completion bash)
The same works for podman-remote and podman --remote and
it will complete your remote containers/images with
the correct endpoints values from --url/--connection.
The completion logic is written in go and provided by the
cobra library. The completion functions lives in
`cmd/podman/completion/completion.go`.
The unit test at cmd/podman/shell_completion_test.go checks
if each command and flag has an autocompletion function set.
This prevents that commands and flags have no shell completion set.
This commit does not replace the current autocompletion scripts.
Closes#6440
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Currently if you run an interactive session of podman run and
specifiy the --cidfile option, the cidfile will not get created
until the container finishes running. If you run a detached
container, it will get created right away. This Patch creates
the cidfile as soon as the container is created. This could allow
other tools to use the cidefile on all running containers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Want to have man pages match commands, since we have lots of printed
man pages with using Options, we will change the command line to use
Options in --help.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
These options are now fully supported in the remote API and should no
longer be hidden and/or documented as non supported.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently the --pull missing|always|never is ignored
This PR implements this for local API. For remote we
need to default to pullpolicy specified in the containers.conf
file.
Also fixed an issue when images were matching other images names
based on prefix, causing images to always be pulled.
I had named an image myfedora and when ever I pulled fedora, the system
thought that it there were two images named fedora since it was checking
for the name fedora as well as the prefix fedora. I changed it to check
for fedora and the prefix /fedora, to prefent failures like I had.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Enables podman create, pull, run, import to use --signature-policy option. Set it as hidden flag to be consistent with other commands.
Signed-off-by: Qi Wang <qiwan@redhat.com>
