Previously podman was using "MB" and "GB" (binary) for input but
"MB" and "GB" (decimal) for output, which was causing confusion.
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Make sure that starting a qemu machine uses proper exponential backoffs
and that a single variable isn't shared across multiple backoffs.
DO NOT BACKPORT: I want to avoid backporting this PR to the upcoming 4.6
release as it increases the flakiness of machine start (see #17403). On
my M2 machine, the flake rate seems to have increased with this change
and I strongly suspect that additional/redundant sleep after waiting for
the machine to be running and listening reduced the flakiness. My hope
is to have more predictable behavior and find the sources of the flakes
soon.
[NO NEW TESTS NEEDED] - still too flaky to add a test to CI.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The --authfile flag has been ignored. Fix that and add a test to make
sure we won't regress another time. Requires a new --tls-verify flag
to actually test the code.
Also bump c/common since common/pull/1538 is required to correctly check
for updates. Note that I had to use the go-mod-edit-replace trick on
c/common as c/buildah would otherwise be moved back to 1.30.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2218315
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When working on Linux emulation on FreeBSD, I assumed that
SpecGenerator.ImageOS was always populated from the image's OS value but
in fact, this value comes from the CLI --os flag if set, otherwise "".
This broke running FreeBSD native containers unless --os=freebsd was
also set. Fix the problem by getting the value from the image itself.
This is a strong incentive for me to complete a stalled project to enable
podman system tests on FreeBSD.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
GetKeepIDMapping never read the gid (as it intended) but reused the uid.
Most likely a typo that never bothered anybody as uid and gid usually
match.
Signed-off-by: Simon Brakhane <simon@brakhane.net>
When debugging #17403, the logs of sshd indicates that Podman tried to
ssh into the machine too soon as the `core` user has not yet been fully
set up:
> error: kex_exchange_identification: Connection closed by remote host
> fatal: Access denied for user core by PAM account configuration [preauth]
@dustymabe found that the we may have to wait for systemd-user sessions
to be up. Doing that reduces the flake rate on my M2 machine but does
not entirely fix the issue.
Since I have seen multiple symptoms of flakiness, I think it does not
hurt to add the systemd-user sessions to the dependencies of the ready
service and continue investigating.
[NO NEW TESTS NEEDED] - once we have a fix out, I want to exercise
frequent stop/start in the machine tests but they won't pass now.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This adds the 'system service' command to the build on FreeBSD and
suppresses the call to servicereaper.Start which is only needed to
support slirp4netns on Linux. A stub for compat.StatsContainer is also
added - stats are still supported via the libpod.StatsContainer API
call.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
Make sure we use the config field to know if we should use pasta or
slirp4netns as default.
While at it fix broken code which sets the default at two different
places, also do not set in Validate() as this should not modify the
specgen IMO, so set it directly before that.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It is pretty complicated to display the secret on the host, but is
not really secured. This patch makes it easier to examine the secret.
Partial fix for https://github.com/containers/podman/issues/18667
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This adds define.BindOptions to declare the mount options for bind-like
mounts (nullfs on FreeBSD). Note: this mirrors identical declarations in
buildah and it may be preferable to use buildah's copies throughout
podman.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
There was a huge cut and paste of mount options which were not constent
in parsing tmpfs, bind and volume mounts. Consolidated into a single
function to guarantee all parse the same.
Fixes: https://github.com/containers/podman/issues/18995
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This is limited to images that don't depend on complex cgroup or capability
setups but does cover enough functionality to be useful.
[NO NEW TESTS NEEDED]
Signed-off-by: Doug Rabson <dfr@rabson.org>
After[1] c/image no longer prints "Storing signatures" so we should
not check for it.
[1] https://github.com/containers/image/pull/2001
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
we were silently ignoring --device-cgroup-rule in rootless mode. Make
sure an error is returned if the user tries to use it.
Closes: https://github.com/containers/podman/issues/18698
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Handle more TOCTOUs operating on listed images. Also pull in
containers/common/pull/1520 and containers/common/pull/1522 which do the
same on the internal layer tree.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2216700
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Ensures that for each hypervisor implementation, their `config.go` file
deals with implementing the `VirtProvider` interface while the
`machine.go` file is for implementing the `VM` interface.
Moves the `Virtualization` type into a common file and
created wrappers for the individual hypervisors. Allows for shared
functions that are exactly the same while providing the flexibility to
create hypervisor-specific implementations of the functions.
[NO NEW TESTS NEEDED]
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Somehow my error message in top was never printed for the compat API,
the libpod one using the same code worked fine. Turns out the compat one
is using this buffered writter instaed but never made sure to flush it
before closing the connection.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Wait before sending status code 200 for the first top call and if that
fails return a proper error code.
This was leading to some confusion in [1] because podman just reported
200 but did not wirte anything back.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2215572
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Support two new wait conditions, "healthy" and "unhealthy". This
further paves the way for integrating sdnotify with health checks which
is currently being tracked in #6160.
Fixes: #13627
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Massage the internal APIs to use a string slice instead of a state slice
for passing wait conditions. This paves the way for waiting on
non-state conditions such as "healthy".
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Most of the code moved there so if from there and remove it here.
Some extra changes are required here. This is a bit of a mess. The pipe
handling makes this a bit more difficult.
[NO NEW TESTS NEEDED] This is just a rework, existing tests must pass.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make sure that the create endpoint does not always return 200 even in
case of a failure. Some of the code had to be massaged since encoding a
report implies sending a 200.
Fixes: #15828
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the push endpoint does not always return 200 even in case
of a push failure. Some of the code had to be massaged since encoding a
report implies sending a 200.
Fixes: #18751
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The platform parameter has been ignored such that images have been
looked up by name only.
Fixes: #18951
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
