Update e2e tests not to expect the flag
System tests - explicitly set the log driver to be able to parse the output
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
While debugging #17904 we found the test to be missing the common podman
flags. Add them to the podman invocations and remove some clutter.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This test was added twice once for CNI and netavark, just write it once
there is no need to do this weird skip thing.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Allow users to customize the network_interface option is the network
config. For bridge this allows users to change the bridge name and for
maclvan it will be the same as `--opt parent=...`.
However the main reason for this option is to allow netavark plugins to
make use of it. I demoed the host-device plugin which makes use of this
as an example. While we could let users set them via --opt it is more
natural to just use the field which is designed for that purpose.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use the kube_generate_type from the containers.conf as
the default value for the --type flag for kube generate.
Override the default when userexplicitly sets the --type
flag.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
The "podman pull by digest and list --all" e2e test pulls an image using
a tagged reference when an image with the same ID is already present in
a read-only additional image store.
This causes a new image record to be created in read-write storage.
The test then removes this entry, pulls the image again using a digested
reference, and then expects the image to not have any tagged names in it
when it goes to look at it again.
Newer containers/storage will ensure that at the point when the
read-write image record is created, that it includes all of the data
items and naming information from the read-only copy of the image, so
that this information doesn't appear to be lost.
Change the test to use "untag" instead of "rmi", which should pass with
either the older or newer containers/storage.
The test is checking that `podman images` doesn't choke when it
encounters a digested name attached to an image, so the difference in
behavior between containers/storage versions is irrelevant.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Since commit f250560a80 the play kube command uses its own network.
this is racy be design because we create the network followed by
creating/running pod/containers. This means in the meantime another
prune or reset process could wipe out the network config because we have
to share the network config directory by design in the test.
The problem is we only have one host netns which is shared between
tests. If the network config dir is not shared we cannot make conflict
checks for interface names and ip address. This results in different
tests trying to use the same interface and/or ip address which will
cause runtime failures in CNI and netavark.
The only solution I see is to make sure only the reset/prune tests are
using a custom network dir. This makes sure they do not wipe configs
that are otherwise required by other parallel running tests.
Fixes#17946
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
At the time of making this commit, the package `github.com/ghodss/yaml`
is no longer actively maintained.
`sigs.k8s.io/yaml` is a permanent fork of `ghodss/yaml` and is actively
maintained by Kubernetes SIG.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Kube generate on pods was not checking for any underscores
in the pod name so was creating a kube yaml with an invalid
pod name when there were underscores present.
The hostname for the pod is set to the podname by default. There
is no need to set that to the container's name or the pod name
again in the generated yaml. So removed that field unless a hostname
was set for the container by the user.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
...mostly just test code that wasn't doing the required waits.
My first approach in the kube-play test was to add "--wait".
Bit mistake! The --wait flag, counterintuitively and counter to
documentation, actually destroys all pods+containers+everything
on exit. (Or tries -- see #17803). Since this violates POLA
and is undocumented, I include here a fix to the man page.
Despite my best intentions, I can't reasonably check every single
test for missing waits, especially in kube-play where failing
containers will get retried forever so we can't wait. We'll
just have to fix flakes as we see them.
Fixes: #17958Fixes: #18071
Signed-off-by: Ed Santiago <santiago@redhat.com>
Test has been flaking. Reason: container was run with -d, so
there's a small window in which podman-healthcheck ran on
a running container. Solution: remove -d
Signed-off-by: Ed Santiago <santiago@redhat.com>
I recently wanted to check which version of Quadlet I was using and
found a `-version` flag to be missing. Since Quadlet and Podman are
bundled together, it seems reasonable to me for them to share the same
version.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add the command along with the abi and tunnel support
Add e2e tests
Add man page
Add apiv2 test to ensure return codes
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
add a function to securely mount a subpath inside a volume. We cannot
trust that the subpath is safe since it is beneath a volume that could
be controlled by a separate container. To avoid TOCTOU races between
when we check the subpath and when the OCI runtime mounts it, we open
the subpath, validate it, bind mount to a temporary directory and use
it instead of the original path.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The podman kube generate command can now generate a
Deployment kind when the --ype flag is set to deployment.
By default, a Pod spec will be generated if --type flag is
not set.
Add --replicas flag to kube generate to allow users to set
the value of replicas in the generated yaml when generating a
Deployment kind.
Add e2e and minikube tests for this feature.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
If the kube yaml volumes has secret.items set, then use
the values from that to set up the paths inside the container
similar to what we do for configMap.
Add tests for this as well.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
By default go will not keep the stdout/err attach when executing
commands via exec.Command(). It is required to explicitly pass the
current stdout/err fds down to the child so we can see the error output
in the logs to debug #17966.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Some key are available only for user scope while there are no keys that
are supported only for system. So, better to run in user scope
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
If a path (Yaml, ConfigMap, EnvFile) starts with a systemd path
specifier, treat the path as absolute
Add tests - unit, e2e and bats
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
If a container with an ID starting with "db1" exists, and a
container named "db1" also exists, and they are different
containers - if I run `podman inspect db1` the container named
"db1" should be inspected, and there should not be an error that
multiple containers matched the name or id "db1". This was
already handled by BoltDB, and now is properly managed by SQLite.
Fixes#17905
Signed-off-by: Matt Heon <mheon@redhat.com>
If the volume source starts with . resolve the path relative to the
location of the unit file
Update the test code to allow verification of regex for the value in key
value arguments
Add the usage of relative paths to the volume and mount test cases
Update the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
The default_ulimits field is currently ignored in podman run commands.
This PR fixes this.
Fixes: https://github.com/containers/podman/issues/17396
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
