* Support `checkpoint --pre-checkpoint`
* Support `checkpoint --with-previous`
* Disable `restore --import-previous` for the remote client since we had
to send two files which in turn would require to tar them up and hence
be a breaking change. Podman 4.0 would be the chance and I hope we'll
find time before that to remote-restore prettier.
Note that I did not run over swagger yet to check whether all parameters
are actually documented due to time constraints.
Fixes: #12334
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Our fedora-minimal image on Quay bases on fedora-minimal:latest which
starting with F35 removed a number of binaries that our CI depends on.
Fix that by pulling `fedora-minimal:34` from the Fedora registry
directly.
Once the build bot on Quay has been disabled, we move the image over
there to make sure that it will not change over time.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Nothing was working before, and it's too much to summarize. To make
sure we're not regressing in the future again, enable the remote e2e
tests.
Fixes: #12007
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Honor custom `target` if specified while running or creating containers
with secret `type=mount`.
Example:
`podman run -it --secret token,type=mount,target=TOKEN ubi8/ubi:latest
bash`
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Podman has been using catatonit for a number of years already.
Thanks to @giuseppe, catatonit is now able to run as a pause
process which allows us to replace the pause binary entirely.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
'--memory-swappiness=0' used to work. This patch fixes the regression
issue, which was caused by the change of infra container creation
process.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
We need to use the config network mode when no network mode was set. To
do so we have to keep the nsmode empty, MakeContainer() will use the
correct network mode from the config when needed.
Fixes#12248
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixed syntax so that podman image scp transfer works with no user specified.
This command can only be executed as root so to obtain the default user, I searched for
the SUDO_USER environmental variable. If that is not found, we error out and inform the user
to set this variable and make sure they are running as root
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
When run as rootless the podman network reload command tries to reload
the rootlessport ports because the childIP could have changed.
However if the containers has no ports we should skip this instead of
printing a warning.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Print out the headers even if the system connection list
is empty to match the behavior of other list commands.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Health checks may be defined in the container config or the config of an
image. So far, Podman only looked at the container config.
The plumbing happened in libimage but add a regression test to Podman as
well to make sure the glue code will not regress.
Note that I am pinning github.com/onsi/gomega to v1.16.0 since v1.17.0
requires go 1.16 which in turn is breaking CI.
Fixes: #12226
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When we create a pod we have to parse the network mode form the config
file. This is a regression in commit d28e85741f.
Fixes#12207
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Added functionality for users to transfer images from root storage to rootless storage without using sshd. This is
done through rootful podman by running `sudo podman image scp root@localhost::image user@localhost:: the user is needed
in order to find and use their uid/gid to exec a new process.
added necessary tests, and functions for this implementation. Created new image function Transfer so that
the underlying code is majorly removed from CLI
Signed-off-by: cdoern <cdoern@redhat.com>
Since we want to use the rootless cni ns also for netavark we should
pick a more generic name. The name is now "rootless network namespace"
or short "rootless netns".
The rename might cause some issues after the update but when the
all containers are restarted or the host is rebooted it should work
correctly.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
the --cgroups=split test changes the current cgroup as it creates a
sub-cgroup. This can cause a race condition in tests that are reading
the current cgroup.
Closes: https://github.com/containers/podman/issues/11191
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is a cosmetic change. The help message for `podman version` is in
title case whereas all other command help messages are not in title
case. This stands out as inconsistent when looking at the output of
`podman help`.
Signed-off-by: Praveen Kumar <praveen+git@kumar.in>
The OCICNI port format has one big problem: It does not support ranges.
So if a users forwards a range of 1k ports with podman run -p 1001-2000
we have to store each of the thousand ports individually as array element.
This bloats the db and makes the JSON encoding and decoding much slower.
In many places we already use a better port struct type which supports
ranges, e.g. `pkg/specgen` or the new network interface.
Because of this we have to do many runtime conversions between the two
port formats. If everything uses the new format we can skip the runtime
conversions.
This commit adds logic to replace all occurrences of the old format
with the new one. The database will automatically migrate the ports
to new format when the container config is read for the first time
after the update.
The `ParsePortMapping` function is `pkg/specgen/generate` has been
reworked to better work with the new format. The new logic is able
to deduplicate the given ports. This is necessary the ensure we
store them efficiently in the DB. The new code should also be more
performant than the old one.
To prove that the code is fast enough I added go benchmarks. Parsing
1 million ports took less than 0.5 seconds on my laptop.
Benchmark normalize PortMappings in specgen:
Please note that the 1 million ports are actually 20x 50k ranges
because we cannot have bigger ranges than 65535 ports.
```
$ go test -bench=. -benchmem ./pkg/specgen/generate/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/pkg/specgen/generate
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
BenchmarkParsePortMappingNoPorts-12 480821532 2.230 ns/op 0 B/op 0 allocs/op
BenchmarkParsePortMapping1-12 38972 30183 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMapping100-12 18752 60688 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMapping1k-12 3104 331719 ns/op 223840 B/op 3018 allocs/op
BenchmarkParsePortMapping10k-12 376 3122930 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMapping1m-12 3 390869926 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingReverse100-12 18940 63414 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMappingReverse1k-12 3015 362500 ns/op 223841 B/op 3018 allocs/op
BenchmarkParsePortMappingReverse10k-12 343 3318135 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMappingReverse1m-12 3 403392469 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingRange1-12 37635 28756 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange100-12 39604 28935 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1k-12 38384 29921 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange10k-12 29479 40381 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1m-12 927 1279369 ns/op 143022 B/op 164 allocs/op
PASS
ok github.com/containers/podman/v3/pkg/specgen/generate 25.492s
```
Benchmark convert old port format to new one:
```
go test -bench=. -benchmem ./libpod/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/libpod
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
Benchmark_ocicniPortsToNetTypesPortsNoPorts-12 663526126 1.663 ns/op 0 B/op 0 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1-12 7858082 141.9 ns/op 72 B/op 2 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10-12 2065347 571.0 ns/op 536 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts100-12 138478 8641 ns/op 4216 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1k-12 9414 120964 ns/op 41080 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10k-12 781 1490526 ns/op 401528 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1m-12 4 250579010 ns/op 40001656 B/op 4 allocs/op
PASS
ok github.com/containers/podman/v3/libpod 11.727s
```
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make sure that the value is only set if specified on the CLI. c/image
already defaults to true but if set in the system context, we'd skip
settings in the registries.conf.
Fixes: #11933
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Previously this test used an ad-hoc timeout mechanism to synchronize
with output of the container ID. However, depending on runtime
conditions this may not correctly correspond with complete startup
of the systemd process. Consequently this test fails under some
conditions with an error like:
`System has not been booted with systemd as init system (PID 1). Can't
operate. Failed to connect to bus: Host is down`
Fix this by using the more appropriate `WaitContainerReady()`
against output from system startup, close to finalization. In this way,
the test status command cannot run until systemd is fully operational.
Signed-off-by: Chris Evich <cevich@redhat.com>
Duplicate Address Detection slows the ipv6 setup down for 1-2 seconds.
Since slirp4netns is run it is own namespace and not directly routed
we can skip this to make the ipv6 address immediately available.
We change the default to make sure the slirp tap interface gets the
correct value assigned so DAD is disabled for it.
Also make sure to change this value back to the original after slirp4netns
is ready in case users rely on this sysctl.
Fixes#11062
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The following problems regarding `logs --tail` with the journald log
driver are fixed:
- One more line than a specified value is displayed.
- '--tail 0' displays all lines while the other log drivers displays
nothing.
- Partial lines are not considered.
- If the journald events backend is used and a container has exited,
nothing is displayed.
Integration tests that should have detected the bugs are also fixed. The
tests are executed with json-file log driver three times without this
fix.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Trying to restore a container that was started with '--ipc host' fails
with:
Error: error creating container storage: ProcessLabel and Mountlabel must either not be specified or both specified
We already fixed this exact same error message for containers started
with '--privileged'. The previous fix was to check if the to be restored
container is a privileged container (c.config.Privileged). Unfortunately
this does not work for containers started with '--ipc host'.
This commit changes the check for a privileged container to check if
both the ProcessLabel and the MountLabel is actually set and only then
re-uses those labels.
Signed-off-by: Adrian Reber <areber@redhat.com>
So far, the infra containers of pods required pulling down an image
rendering pods not usable in disconnected environments. Instead, build
an image locally which uses local pause binary.
Fixes: #10354
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
