Adds an `--podman-only` flag to `podman generate kube` to allow for
reserved annotations to be included in the generated YAML file.
Associated with: #19102
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Adds a `--no-trunc` flag to `podman kube generate` preventing the
annotations from being trimmed at 63 characters. However, due to
the fact the annotations will not be trimmed, any annotation that is
longer than 63 characters means this YAML will no longer be Kubernetes
compatible. However, these YAML files can still be used with `podman
kube play` due to the addition of the new flag below.
Adds a `--no-trunc` flag to `podman kube play` supporting YAML files with
annotations that were not truncated to the Kubernetes maximum length of
63 characters.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Previous tests have worked by pure chance since the client and server
ran on the same host; the server picked up the credentials created by
the client login.
Extend the gating tests and add a new integration test which is further
capable of exercising the remote code.
Note that fixing authentication support requires adding a new
`--authfile` CLi flag to `manifest inspect`. This will at least allow
for passing an authfile to be bindings. Username and password are not
yet supported.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Users may want to replace the secret used within containers, without
destroying the secret and recreating it.
Partial fix for https://github.com/containers/podman/issues/18667
Make sure podman --remote secret inspect and podman secret inspect
return the same error message.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The --authfile flag has been ignored. Fix that and add a test to make
sure we won't regress another time. Requires a new --tls-verify flag
to actually test the code.
Also bump c/common since common/pull/1538 is required to correctly check
for updates. Note that I had to use the go-mod-edit-replace trick on
c/common as c/buildah would otherwise be moved back to 1.30.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2218315
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
It is pretty complicated to display the secret on the host, but is
not really secured. This patch makes it easier to examine the secret.
Partial fix for https://github.com/containers/podman/issues/18667
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Handle more TOCTOUs operating on listed images. Also pull in
containers/common/pull/1520 and containers/common/pull/1522 which do the
same on the internal layer tree.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2216700
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Support two new wait conditions, "healthy" and "unhealthy". This
further paves the way for integrating sdnotify with health checks which
is currently being tracked in #6160.
Fixes: #13627
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Massage the internal APIs to use a string slice instead of a state slice
for passing wait conditions. This paves the way for waiting on
non-state conditions such as "healthy".
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add support for `--imagestore` in podman which allows users to split the filesystem of containers vs image store, imagestore if configured will pull images in image storage instead of the graphRoot while keeping the other parts still in the originally configured graphRoot.
This is an implementation of
https://github.com/containers/storage/pull/1549 in podman.
Signed-off-by: Aditya R <arajan@redhat.com>
Remove code duplication and use the new FilterID function from
c/common. Also remove the duplicated ComputeUntilTimestamp in podman use
the one from c/common as well.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
add routes using the --route flag.
the no_default_route option in --opt prevents a default route from
getting added automatically.
Signed-off-by: Jan Hendrik Farr <github@jfarr.cc>
For filter=id=XXX (containers, pods) and =ctr-ids=XXX (pods):
if XXX is only hex characters, treat it as a PREFIX
otherwise, treat it as a REGEX
Add tests. Update documentation. And fix an incorrect help message.
Fixes: #18471
Signed-off-by: Ed Santiago <santiago@redhat.com>
To debug a deadlock, we really want to know what lock is actually
locked, so we can figure out what is using that lock. This PR
adds support for this, using trylock to check if every lock on
the system is free or in use. Will really need to be run a few
times in quick succession to verify that it's not a transient
lock and it's actually stuck, but that's not really a big deal.
Signed-off-by: Matt Heon <mheon@redhat.com>
This is a general debug command that identifies any lock
conflicts that could lead to a deadlock. It's only intended for
Libpod developers (while it does tell you if you need to run
`podman system renumber`, you should never have to do that
anyways, and the next commit will include a lot more technical
info in the output that no one except a Libpod dev will want).
Hence, hidden command, and only implemented for the local driver
(recommend just running it by SSHing into a `podman machine` VM
in the unlikely case it's needed by remote Podman).
These conflicts should normally never happen, but having a
command like this is useful for debugging deadlock conditions
when they do occur.
Signed-off-by: Matt Heon <mheon@redhat.com>
The infra container would try to remove the pod, despite the pod
already being in the process of being removed - oops. Add a check
to ensure we don't try and remove the pod when called by the
`podman pod rm` command.
Also, wire up noLockPod - it wasn't previously wired in, which is
concerning, and could be related?
Finally, make a few minor fixes to un-break lint.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This probably should have been in the API since the beginning,
but it's not too late to start now.
The extra information is returned (both via the REST API, and to
the CLI handler for `podman rm`) but is not yet printed - it
feels like adding it to the output could be a breaking change?
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This allows for accurate reporting of dependency removal, but the
work is still incomplete: pods can be removed, but do not report
the containers they removed as part of said removal. Will add
this in a subsequent commit.
Major note: I made ignoring no-such-container errors automatic
once it has been determined that a container did exist in the
first place. I can't think of any case where this would not be a
TOCTOU - IE, no reason not to ignore them. The `--ignore` option
to `podman rm` should still retain meaning as it will ignore
errors from containers that didn't exist in the first place.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This is the initial stage of implementation. The current API
functions but does not report the additional containers and pods
removed. This is necessary to properly display results to the
user after `podman rm --all`.
The existing remove-dependencies code has been removed in favor
of this more native solution.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Implement means for reflecting failed containers (i.e., those having
exited non-zero) to better integrate `kube play` with systemd. The
idea is to have the main PID of `kube play` exit non-zero in a
configurable way such that systemd's restart policies can kick in.
When using the default sdnotify-notify policy, the service container
acts as the main PID to further reduce the resource footprint. In that
case, before stopping the service container, Podman will lookup the exit
codes of all non-infra containers. The service will then behave
according to the following three exit-code policies:
- `none`: exit 0 and ignore containers (default)
- `any`: exit non-zero if _any_ container did
- `all`: exit non-zero if _all_ containers did
The upper values can be passed via a hidden `kube play
--service-exit-code-propagation` flag which can be used by tests and
later on by Quadlet.
In case Podman acts as the main PID (i.e., when at least one container
runs with an sdnotify-policy other than "ignore"), Podman will continue
to wait for the service container to exit and reflect its exit code.
Note that this commit also fixes a long-standing annoyance of the
service container exiting non-zero. The underlying issue was that the
service container had been stopped with SIGKILL instead of SIGTERM and
hence exited non-zero. Fixing that was a prerequisite for the exit-code
propagation to work but also improves the integration of `kube play`
with systemd and hence Quadlet with systemd.
Jira: issues.redhat.com/browse/RUN-1776
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure that the directory formats are not just substituted with their
archive counterparts but actually tar'ed up directories. Also make sure
that the clients don't get chown errors by setting rootless user and
group ID instead of O when running in the user namespace.
Fixes: #15897
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Read the entire YAML file in case of a multi-doc file
Adjust the unit test
Add a system test
Add comment in the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
In rootFsSize(), instead of calculating the size of the diff for every
layer of the container's base image, ask the storage library for the sum
of the values it recorded when it first wrote those layers.
In a similar fashion, teach rwSize() to use the library's
ContainerSize() method instead of trying to roll its own.
Replace calls to pkg/util.SizeOfPath() with calls to
github.com/containers/storage/pkg/directory.Size(), which does the same
thing.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
initContainers in kubernetes deployments had no call to CompleteSpec in the
generation, which means that the default environment is not configured for
these. This causes issues with missing default environment variables like $HOME
or $PÄTH.
Also, switch to using logrus.Warn() instead of fmt.Fprintf(os.Stderr)
This fixes https://github.com/containers/podman/issues/18384
Co-authored-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Dan Čermák <dcermak@suse.com>
Podman kube generate now uses the pod's restart policy
when generating the kube yaml. If generating from containers
only, use the restart policy of the first non-init container.
Podman kube play applies the pod restart policy from the yaml
file to the pod. The containers within a pod inherit this restart
policy.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add Restarts column to the podman pod ps output to show the total number
of times the containers in a pod were restarted. This is the same as the
restarts column displayed by kubernetes with kubectl get pods. This will
only be displayed when --format={{.Restarts}}.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add Restarts column to the podman ps output to show how many times a
container was restarted based on its restart policy. This column will be
displayed when --format={{.Restarts}}.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add --restart flag to pod create to allow users to set the
restart policy for the pod, which applies to all the containers
in the pod. This reuses the restart policy already there for
containers and has the same restart policy options.
Add "never" to the restart policy options to match k8s syntax.
It is a synonym for "no" and does the exact same thing where the
containers are not restarted once exited.
Only the containers that have exited will be restarted based on the
restart policy, running containers will not be restarted when an exited
container is restarted in the same pod (same as is done in k8s).
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Requires vendoring fixes from c/common and to update the transformation
code. Also add a test to avoid future regressions.
Fixes: #17763
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
By default podman save tries to write to /dev/stdout, this file doe snot
exists on windows and cannot be opened. Instead we should just use fd 1
in such case.
[NO NEW TESTS NEEDED]
Fixes#18147
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we encounter an error while pushing a manifest list, don't claim
that we encountered an error while adding an item to the list.
[NO NEW TESTS NEEDED]
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Wire in support for writing the digest of the pushed image to a
user-specified file. Requires some massaging of _internal_ APIs
and the extension of the push endpoint to integrate the raw manifest
(i.e., in bytes) in the stream.
Closes: #18216
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The Report will be used in a future change as a new return value for the
internal Push API.
Note: this change is only breaking internal APIs while user-facing
external ones remain unchanges.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Fix a number of bugs wrt. filtering remote containers and how to
process specified names or IDs. I _really_ do not like the duplication
between remote and local Podman but want to focus on fixing #18153
for now.
What I desire in the future is to consolidate all functionality of
looking up containers (all, latest, filters, specified names/IDs, etc.)
and for remote clients to just call containers/list etc.
Fixes: #18153
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The documentation says
> The new Buffer takes ownership of buf, and the
> caller should not use buf after this call.
so use the more directly applicable, and simpler, bytes.Reader instead, to avoid this potentially risky use.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
