Followup to #15673 (--format with newlines). I cobbled up a test
for it, but I was sloppy, so the test had issues that I kept
having to band-aid. This is a cleaner way to handle podman-machine.
...and, another unexpected surprise with podman stats. It
fails under rootless cgroupsv1. We can't sweep it under the
rug via skip_if_ubuntu because tests will then fail on RHEL8.
So, add a similar mechanism for testing podman stats.
...plus a non-surprise, the 'search' test flakes. Try minimizing
that by searching only $IMAGE. If quay.io is down, other tests
will certainly fail.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Three tests were running 'container rm' on 'start'ed containers
that might not yet have exited. Fix. Also, tighten up the
tests themselves, to make even more sure that they test
what they're supposed to test.
Discovered, in CI, that 'podman-remote logs --timestamps'
was unimplemented. Thanks to @Luap99 for the fix to that.
Fixes: #15783Fixes: #15795
Signed-off-by: Ed Santiago <santiago@redhat.com>
The process of saving the OCI spec is not particularly
reboot-safe. Normally, this doesn't matter, because we recreate
the spec every time a container starts, but if one was to reboot
(or SIGKILL, or otherwise fatally interrupt) Podman in the middle
of writing the spec to disk, we can end up with a malformed spec
that sticks around until the container is next started. Some
Podman commands want to read the latest version of the spec off
disk (to get information only populated after a container is
started), and will break in the case that a partially populated
spec is present. Swap to just ignoring these errors (with a
logged warning, to let folks know something went wrong) so we
don't break important commands like `podman inspect` in these
cases.
[NO NEW TESTS NEEDED] Provided reproducer involves repeatedly
rebooting the system
Signed-off-by: Matthew Heon <mheon@redhat.com>
Three simple options shared among podman-create, exec, run.
I mostly went with the podman-run versions. For --tty, this
means that create and exec get the long stdout/stderr note.
(The example, though, remains only in podman-run). For -i,
mostly boldspace changes.
For --preserve-fds, podman-exec now has the "not with remote"
note (which it didn't until now)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Two PRs have been merged causing a failure in one unit test.
Fix the unit test to turn CI green again.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Similar to yesterday's --ip. No changes to content, all I did
was variableize the instances of 'container'/'pod'.
Did not touch podman-network-connect file, but if someone
wants to look at that one and tell me whether all this long
text is applicable to it (or not), I'd appreciate it.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The default ip is 10.0.2.2 but is always the second ip from the
slirp4netns subnet, which can be changed via the cidr option.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2090166
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When creating a new pod without the `--name` flag, e.g.:
`podman pod create foobar`
it will get the name `foobar` implicitly and this will be recorded as the in the
`podCreateArgs`. Unfortunately, the implicit name only works if it appears as
the **last** argument of the startup command.
With 6e2e3a78ed we started appending the pod
security policy to the startCommand, resulting in the following `ExecStartPre=`
line:
```
/usr/bin/podman pod create --infra-conmon-pidfile %t/pod-foobar.pid --pod-id-file %t/pod-foobar.pod-id foobar --exit-policy=stop
```
This fails to launch, as the `pod create` command expects only a single
non-flag parameter, but it assumes that `exit-policy=stop` is a second and
terminates immediately instead.
This fixes https://github.com/containers/podman/issues/15592
Signed-off-by: Dan Čermák <dcermak@suse.com>
Initially just supporting just rctl_get_racct for
(*Container).GetContainerStats.
[NO NEW TESTS NEEDED] we are not running any FreeBSD tests in CI
Signed-off-by: Doug Rabson <dfr@rabson.org>
In view of https://github.com/containers/storage/pull/1337, do this:
for f in $(git grep -l stringid.GenerateNonCryptoID | grep -v '^vendor/'); do
sed -i 's/stringid.GenerateNonCryptoID/stringid.GenerateRandomID/g' $f;
done
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Ugh. This had about five different variations among twelve files.
I went with the version from podman-create, kube play, login, pull,
push, run. The others:
- manifest-add and create did not include the "true, false, missing"
text. Now they do. (If this text is N/A to these two, please yell).
Also, these two were written with "talking" instead of "contacting"
the registry.
- podman-build had "does not work with remote", but this
does not seem to be true, so I removed it. None of the
other files had that.
- the wording in podman-search is just weird, with "if needed"
and "is listed" and unclear "insecure registries". I just
nuked it all. If that wording was deliberate, for some reason
that applies only to podman-search, please yell.
- podman-container-runlabel has one diff that I like, actually
spelling out containers-registries.conf(5), but incorporating
that would make this even harder to review. I will add that
to my in-progress doc-cleanup PR.
Review recommendation: run hack/markdown-preprocess-review but
just quit out of it immediately (on both popups). Ignore it completely.
Then cd /tmp/markdown-preprocess-review.diffs/tls-verify and run
$ clear;for i in podman-*;do echo;echo $i;wdiff -t $i zzz-chosen.md;done
This will show the major diffs between each version and the chosen one.
Assumes you have wdiff installed. If you have another colorize-actual-
individual-word-diffs tool installed, use that. I like cdif[1].
[1] https://github.com/kaz-utashiro/sdif-tools
Signed-off-by: Ed Santiago <santiago@redhat.com>
Change the dependencies from a pod unit to its associated container
units from `Requires` to `Wants` to prevent the entire pod from
transitioning to a failed state. Restart policies for individual
containers can be configured separately.
Also make sure that the pod's RunRoot is always set.
Fixes: #14546
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Almost identical between podman-create, run, and pod-create.
The "Notes" are different, so I left those duplicated between
podman-create and run, and left the different one in pod-create.
podman-container-restore also has --publish but it's unrelated.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This version does a much better job of error reporting and also catches
more commands.
Changes from edsantiago.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Only shared between podman-create and run. The latter was
updated in #5192, and that is the text I chose.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Belated followup to #11829: use github labeler workflow[1] to
auto-add 'kind/api-change' label to PRs in which files are
touched under pkg/api
[1] https://github.com/actions/labeler
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only shared by podman-create, -pull, -run. No changes
made other than whitespace, so this should be a gimme.
podman-build, import, and manifest-* also have --os options,
but those are unrelated and I can't find a way to combine
any two of them.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Between podman-create, run, and pod-create. The big difference
is that I changed 'IP' to 'IPv4' in podman-pod-create, I believe
that was an oversight in #12611.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Emit a warning to the user when generating a unit with --new on a
container that was created with a custom --restart policy. As shown
in #15284, a custom --restart policy in that case can lead to issues
on system shutdown where systemd attempts to nuke the unit but Podman
keeps on restarting the container.
Fixes: #15284
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Restart the health-check timers instead of starting them. This will
surpress annoying errors stating that an already running timer cannot be
started anymore.
Also make sure that the transient units/timers are stopped and removed
when stopping a container.
Fixes: #15691
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Now that commit d10e77e1bc is merged, it will reuse the same template
logic as inspect and therefore should just work.
Also remove the FIXME from eds test.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Currently the podman command --format output code uses a mix of
report.Formatter and report.Template.
I patched report.Formatter to correctly handle newlines[1]. Since we
cannot fix this with report.Template we have to migrate all users to
report.Formatter. This ensures consistent behavior for all commands.
This change does not change the output.
[1] https://github.com/containers/common/pull/1146
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
