The buildah buil kill trick is bad as we have to sleep and wait to aboid
flakes which takes time. Instead it is possible to redo this build part
manually with buildah commands. It is not trival and harder to
understand but it safes 2-3s so I think it is worth it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
First, as root don't wait 5s for the timeout, 1s is enough. Also switch
to use the curl --max-time option instead, that way we know we do not
kill curl before it had the chance to do anything possibly.
Second, combine podman inspect commands into one. This makes the test
faster by over one second as we safe a bunch of podman commands.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Another case of contianer does not exit with SIGTERM so we waste 10s.
Now because our contianer reacts to sigterm and exits 0 the systemd unit
status changed to inactive from failed.
And most importantly add Notify=yes because the socat call always failed
as the default is to not leak the notify socket into the container.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It is not clear at all why the count of 30 was choosen, this seems a
lot and of course takes quite a while. The test takes over 16s in CI.
To speed it up reduce the count to 10. I think this should still be good
enough to ensure there are no races IMO.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It makes the test a bit uglier but I cannot see a good way to sped this
up otherwise. I chnaged the created test to only start/stop the
contianer once instead of every test case iteration. This makes it about
2s faster locally.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Overall just combine several container runs into one. Every RUN
instruction will run a new container which is quite expensive so chain
the commands together. The same for podman run's.
I could have combined a bit more but I think this leaves it still
readable. This speeds up the test about 4s locally from 8s before.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use podman version over podman info because info has to query a lot of
internal state, e.g. contianer and image count, so it is slower than a
simple info. This speeds the test up by about 600ms locally.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Issue #11825 was fixed a long time ago. Also we no longer test
cni/dnsname so there is really no point in having this.
Speeds up the test by 1 second.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Another case of contianer does not exit with SIGTERM so we waste 10s.
Now because our contianer reacts to sigterm and exits 0 the systemd
unit status changed to inactive from failed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We don't have two loop twice for the stat call we can just stat both
dirs at once. This means we only have to create half of the containers
so the test is twice as fast.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Testing `podman system check` requires that we have a way to
intentionally introduce storage corruptions. Add a hidden `podman
testing` command that provides the necessary internal logic in
subcommands. Stub out the tunnel implementation for now.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
debian's man (5) hostname page states "The file should contain a single newline-terminated hostname
string."
[NO NEW TESTS NEEDED]
fix#22729
Signed-off-by: Bo Wang <wangbob@uniontech.com>
The e2e tests already depend on skopeo anyway and pulling a over 300
MB image is not helpful for flakes but most importantly we see ENOSPC
flakes. I see them around the skopeo test so I assume the big image is
pushing the tmpfs limits so other tests running in parallel can start
failing because of it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The expectation with --cgroups=disabled is that the current cgroup is
used by the container.
Currently the --cgroups=disabled is passed directly to the OCI
runtime, but it doesn't stop Podman from creating a new cgroup when it
doesn't own the current one.
Closes: https://github.com/containers/podman/issues/20910
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
the condition doesn't work when the runtime to use is specified
through its absolute path as the error message contains that.
Simplify the check and just look for "read from the init process".
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The command does not react on sigterm, so kube down needs to wait 10s.
To fix it first use a command that does but also write the yaml
directly instead of doing the podman create && kube generate dance.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
use a command that stops on SIGTERM not sleep, that way the tests can
continue to use podman kube down without waiting for the full stop
timeout every time.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This test is by far the slowest one taking over minute, the reason is
that it is checking every single podman command for shell completions.
The test is useful but it does not need to check the "..." argument 3
times. Test a second time to make sure not only the first arg is
completed. This change makes it about 15 seconds faster.
Long term we should get this test out of the main system tests together
with other cli only tests as they do not need to run on each OS, etc...
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The current logic used podman logs I don't understand way, all we care
about is the container output and we can just read the same with a
attached podman run, of course we have to move it into the background
but it did the some with logs.
This also allows us to remove the extra log-driver checks and because
podman logs seems to be much slower than the extra run we safe over 10s
with this change.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use only one retry and a short stop timeout to speed them up. I am not
sure if this will cause flakes, I have not seen any after trying for
some time so I think this works just as well. And is about 2-3 seconds
faster for both tests.
If it does start to flake we can revert this commit again or write the
test differently.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Do not wait 5 seconds, just stop the container directly.
This speeds up the test by more than 4 seconds.
One could make the case here that we want to check podman wait but
there are so many other podman wait tests that it should not matter.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Instead of iterating over all tmp dirs and creating test containers for
each one we can just pass all files to one touch call. With that we have
to create much less containers while still checking the same thing. This
speeds up the test by about 4 seconds.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The test used sleep to synchronize log output between both containers
which is slow. There is actually no way to guarantee the ordering on
the reading side so just remove the sleep's and check the the lines
within the same container are in the right order.
Trying to preserve the orignal ordering is just not possible if we speed
up the test as it would flake to often.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There is no reason for this check to wait 4 seconds for the container to
run, instead make sure to have a running process and then stop it
directly with -t0 not have any delay.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
As agreed in Planning meeting of 2024-03-20, Podman 5.x will
drop support for cgroups v1 and for runc. Make it so.
CI images built in https://github.com/containers/automation_images/pull/338
Signed-off-by: Ed Santiago <santiago@redhat.com>
This container did not react to sigterm thus we always waited 10s for it
to stop. Also do not wait 2s for the logs instead use a retry loop.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The test does a normal stop on a command that does not react to sigterm.
As I cannot fix the system stop logic use a command which does. This
safes us 10s as it no longer waits for the timeout.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Both tests take 10s longer than they need to because they run the sleep
command int he container which does not react to sigterm, as such podman
waits 10s before killing it with sigkill.
To fix it just stop them with podman rm -fa -t0 to avoid the wait and do
not use podman kube down as we cannot set a timeout there. podman kube
down is still covered in many other tests so this is not an issue.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
IMO it is not important to cover each case with each sdnotify policy, to
speed them up we run all the exit code cases only once just twice for
each policy while switching the sdnotify policy between each case. This
way we safe 50% of runs and should still have sufficient coverage.
Before it took around 24 seconds, with this it is around 12 seconds now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There is really no point in waiting 10s for the kill, let's use 2 this
should be good enough to observe the timing.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This test waits 15 seconds to send sigterm for no good reason, we can
just make the timeout shorter. Also make sure the podman command quit on
sigterm by looking for the output message.
While at it fix the tests to use $PODMAN_TMPDIR not /tmp and define the
yaml in the test instead of using the podman create && podman kube
generate && podman rm way to create the yaml as it is a bit slower as we
have to call three podman commands for it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Merge two podman event tests into one to speed them up as they did
mostly the same anyway. This way we only have to do the setup/teardown
once and only run one container.
Second, add the --since option because reading the journal can be slow
if you have thousands of event entries. This is not so critical in CI as
we run on fresh systems but on local dev machines I have almost 100k
events in the journal so parsing all of them makes this test slow (like
30s), with this change I can get it under 1s.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
.build files allow to build an image via Quadlet. The keys from a .build
file are translated to arguments of a `podman build` command by Quadlet.
Minimal keys for .build files are `ImageTag=` and a context directory,
see `SetWorkingDirectory=`, or a `File=` pointing to a Containerfile.
After sorting .build files into the Quadlet dependency order, there
remains a possible dependency cycle issue between .volume and .build
files: A .volume can have `Image=some.build`, and a .build can have
`Volume=some.volume:/some/volume`.
We solve this dependency cycle by prefilling resourceNames with all
image names from .build files before converting all the unit files.
This results in an issue for the test suite though: For .volume's
depending on *.image or *.build, we need to copy these additional
dependencies to the test's quadletDir, otherwise the test will fail.
This is necessary, because `handleImageSource()` actually needs to know
the image name defined in the referenced *.{build,image} file. It cannot
fall back on the default names, as it is done for networks or volumes,
for example.
Signed-off-by: Johannes Maibaum <jmaibaum@gmail.com>
Defining a timer with a fixed interval is not a good idea as we first
have to wait until the timer triggers, while the interval was every two
seconds it means that we have to wait at least 2s for it to start.
However much worse it means it triggers the unit over and over, this
seems to cause some soft of race with the output check. I have seen
this test run 10-60s which does not make much sense.
Switching the timer to trgger once on start seem to make the test run
consistently in 7s locally for me so this is much better.
There still is the question if we really have to test this at all on
each upstream PR but I left it for now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It takes over 10 seconds for this test as it uses --wait 5 twice which
runs into the timeout. IMO this tests is just redundant as it is already
covered in the e2e tests much better. Thus remove it here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
