This option causes Podman to not only remove the specified containers
but all of the containers that depend on the specified
containers.
Fixes: https://github.com/containers/podman/issues/10360
Also ran codespell on the code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Remove hard code use of the DefaultInfraImage and rely on
getting this from containers.conf.
Fixes: https://github.com/containers/podman/issues/12771
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Podman often has to run behind an http/https proxy, often in corporate environments.
This proxy may or may not include SSL inspection capabilities, requiring a trusted SSL CA certificate to be added to a system's trust store.
Copy the file referred to by SSL_CERT_FILE on the host into the podman machine's OS trust store, overriding the built-in single-file trust store certificate.
Also set the `SSL_FILE_CERT` on remote machine
[NO NEW TESTS NEEDED]
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Podman often has to run behind an http/https proxy, often in corporate environments.
This proxy may or may not include SSL inspection capabilities, requiring a trusted SSL CA certificate to be added to a system's trust store.
Solve this by reading standard proxy variables (HTTP_PROXY HTTPS_PROXY NO_PROXY http_proxy https_proxy no_proxy) and injecting them into the machine at init.
[NO NEW TESTS NEEDED]
Signed-off-by: Aditya Rajan <arajan@redhat.com>
If the pod yaml has env from secret and condifg map but they are optional
and the secret cannot be found, don't add the env key as well
as the env value will not be found. Matches behavior with k8s.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
this commit fixes two bugs and adds regression tests.
when getting healthcheck values from an image, if the image does not
have a timeout defined, this resulted in a 0 value for timeout. The
default as described in the man pages is 30s.
when inspecting a container with a healthcheck command, a customer
observed that the &, <, and > characters were being converted into a
unicode escape value. It turns out json marshalling will by default
coerce string values to ut8.
Fixes: bz2028408
Signed-off-by: Brent Baude <bbaude@redhat.com>
We enforce the naming scheme "<podname>-<containername>" here [1].
Therefore we must not rename the pod in case of a naming conflict
between pod name and container name. Not renaming the pod increases the
usability for the user and easies scripting based on the name. Otherwise
a user must set some label to reliable find a pod after creation. Or
have to implement the renaming logic in the script.
[1] https://github.com/containers/podman/blob/main/pkg/specgen/generate/kube/kube.go#L140Fixes#12722
Signed-off-by: Christoph Petrausch <chrobbert@gmail.com>
We are hard coding mounts to return nil in compat API,
since we have the data, we should return it.
Fixes: https://github.com/containers/podman/issues/12734
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
For Status = "die", Docker sets the exit code of the container
to a field "exitCode". Podman uses "containerExitCode".
Copy the value into "exitCode" as well, for compatibility.
Signed-off-by: Leah Neukirchen <leah@vuxu.org>
Use the same type of mounts for all the machine volumes.
The default could change in the future, depending on OS.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
There are other mount types available, such as NFS or SMB,
or one could use reverse sshfs for better compatibility.
It could either be a global option, or it could perhaps be
overridden for each volume (like the container volumes).
Refactor the creation of the options string or array.
Allow specifying the volume as read-only, if desired.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Allow using the built-in 9pfs feature of qemu,
mounting host directories into vm mountpoints.
The volumes are generic, the mounts are specific.
Wait for the machine to be "running", otherwise
the SSH function might throw an error instead.
Increase the default msize from 8 KiB to 128 KiB
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Added support for pod security options. These are applied to infra and passed down to the
containers as added (unless overridden).
Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit`
This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create
code and pod creation.
resolves#12173
Signed-off-by: cdoern <cdoern@redhat.com>
Following PR ensures that certs from `~/.config/containers/certs.d` or `~/.config/docker/certs.d`
are copied into the remote machine at `/etc/containers/certs.d/`
As a result on platforms like `macOS` where podman works with a remote
machine setup. User's local certs must be transferd to VM without any
plumbing needed by user.
[NO-NEW-TESTS-NEEDED]
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Podman image scp should never enter the Podman UserNS unless it needs to. This allows for
a sudo exec.Command to transfer images to and from rootful storage. If this command is run using sudo,
the simple sudo podman save/load does not work, machinectl/su is necessary here.
This modification allows for both rootful and rootless transfers, and an overall change of scp to be
more of a wrapper function for different load and save calls as well as the ssh component
Signed-off-by: cdoern <cdoern@redhat.com>
Some containers require certain user account(s) to exist within the
container when they are run. This option will allow callers to add a
bunch of passwd entries from the host to the container even if the
entries are not in the local /etc/passwd file on the host.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Do not apply reserved annotations from the image to the container.
Reserved annotations are applied during container creation to retrieve
certain information (e.g., custom seccomp profile or autoremoval)
once a container has been created.
Context: #12671
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
CRIU's pre-copy migration support relies on the soft dirty page tracking
in the Linux kernel:
https://www.kernel.org/doc/Documentation/vm/soft-dirty.txt
This functionality is not implemented for all architectures and it can
also be turned off in the kernel.
CRIU can check if the combination of architecture/kernel/CRIU supports
the soft dirty page tracking and exports this feature checking
functionality in go-criu.
This commit adds an early check if the user selects pre-copy
checkpointing to error out if the system does not support it.
Signed-off-by: Adrian Reber <areber@redhat.com>
It has been deprecated and is no longer supported. Fully remove it and
only print a warning if a user uses it.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2011695
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for a new flag --passwd which, when false prohibits podman from creating entries in
/etc/passwd and /etc/groups allowing users to modify those files in the container entrypoint
resolves#11805
Signed-off-by: cdoern <cdoern@redhat.com>
When normalizing image names on the compat API, make sure to take the
`sha256:` prefix into account when matching against the image ID.
Otherwise, the name will mistakingly be subject to docker.io
normalization.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when using the default userns value, make sure its value is parsed so
that userns=auto is parsed and the options for the storage are filled.
Closes: https://github.com/containers/podman/issues/12615
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Since #10168, on the event "died", the Status is set to "die"
for compatibility with the Docker API. Docker also sets
the field Action to "died", so do the same here.
Signed-off-by: Leah Neukirchen <leah@vuxu.org>
include the arguments used to create the user namespace to help
debugging.
[NO NEW TESTS NEEDED] it changes a debug message
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Added an option to podman machine init to declare the timezone of the
resulting machine. the default is to use the value of the host name or
else a given timezone name like America/Chicago.
Fixes: #11895
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
The libpod/images/remove endpoint is not very REST-ish but, after some
debate, was decided to be implemented as for the following reasons.
First, it allows for batch removing images which improves performance
significantly. Note that Docker does support `rmi -a`!
Second, it allows for hiding the logic of setting the right exit code to
use from the client and keep all the logic on the server.
Hence, when removing an image that does not exist, the server will
return a 200. The response, however, includes the error message to be
used *and* the exit code that podman-remote will use.
Fixes: #12441
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
