This commit was automatically cherry-picked
by buildah-vendor-treadmill v0.3
from the buildah vendor treadmill PR, #13808
* Fix conflict caused by Ed's local-registry PR in buildah
* Wire in "new" --retry and --retry-delay, these existed for longer
but where non functional.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
These flags can affect the output of the HealtCheck log. Currently, when a container is configured with HealthCheck, the output from the HealthCheck command is only logged to the container status file, which is accessible via `podman inspect`.
It is also limited to the last five executions and the first 500 characters per execution.
This makes debugging past problems very difficult, since the only information available about the failure of the HealthCheck command is the generic `healthcheck service failed` record.
- The `--health-log-destination` flag sets the destination of the HealthCheck log.
- `none`: (default behavior) `HealthCheckResults` are stored in overlay containers. (For example: `$runroot/healthcheck.log`)
- `directory`: creates a log file named `<container-ID>-healthcheck.log` with JSON `HealthCheckResults` in the specified directory.
- `events_logger`: The log will be written with logging mechanism set by events_loggeri. It also saves the log to a default directory, for performance on a system with a large number of logs.
- The `--health-max-log-count` flag sets the maximum number of attempts in the HealthCheck log file.
- A value of `0` indicates an infinite number of attempts in the log file.
- The default value is `5` attempts in the log file.
- The `--health-max-log-size` flag sets the maximum length of the log stored.
- A value of `0` indicates an infinite log length.
- The default value is `500` log characters.
Add --health-max-log-count flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-max-log-size flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-log-destination flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
* podman manifest remove doesn't accept references as descriptions of
what to remove from a list or index; only use digests in the man page
* podman manifest remove only removes one thing at a time; correct the
man page examples
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
When the user specifies a Containerfile or Dockfile with the -f flag in podman build, if the file does not exist, the error should be intuitive to the user.
Fixed: #22940
Signed-off-by: Kevin Cui <bh@bugs.cc>
The pod was set after we checked the namespace and the namespace code
only checked the --pod flag but didn't consider --pod-id-file option.
As such fix the check to first set the pod option on the spec then use
that for the namespace. Also make sure we always use an empty default
otherwise it would be impossible in the backend to know if a user
requested a specific userns or not, i.e. even in case of a set
PODMAN_USERNS env a container should still get the userns from the pod
and not use the var in this case. Therefore unset it from the default
cli value.
There are more issues here around --pod-id-file and cli validation that
does not consider the option as conflicting with --userns like --pod
does but I decided to fix the bug at hand and don't try to fix the
entire mess which most likely would take days.
Fixes#22931
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is the same as what --squash-all is doing, and we already support
--squash with --layers=true since this is the default.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The expectation with --cgroups=disabled is that the current cgroup is
used by the container.
Currently the --cgroups=disabled is passed directly to the OCI
runtime, but it doesn't stop Podman from creating a new cgroup when it
doesn't own the current one.
Closes: https://github.com/containers/podman/issues/20910
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is something Docker does, and we did not do until now. Most
difficult/annoying part was the REST API, where I did not really
want to modify the struct being sent, so I made the new restart
policy parameters query parameters instead.
Testing was also a bit annoying, because testing restart policy
always is.
Signed-off-by: Matt Heon <mheon@redhat.com>
The logic here is more complex than I would like, largely due to
the behavior of `podman inspect` for running containers. When a
container is running, `podman inspect` will source as much as
possible from the OCI spec used to run that container, to grab
up-to-date information on things like devices. We don't want to
change this, it's definitely the right behavior, but it does make
updating a running container inconvenient: we have to rewrite the
OCI spec as part of the update to make sure that `podman inspect`
will read the correct resource limits.
Also, make update emit events. Docker does it, we should as well.
Signed-off-by: Matt Heon <mheon@redhat.com>
Follow up to 493179be45 which only fixed the issue on the server despite
me trying to fix it on the client as well, with this change here we
always correctly unset the default on the remote client as the
root/rootless status will be wrong.
This means it is enough for users to either have a new server or client
with the bug fix which should make the update process easier.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I am really not sure why the caller even should have the option to set
this. We should always use the correct isolation type based on the
privileges the server runs under never the client. podman-remote build
seems to send the default based on its local privs which was wrong as
well. To fix this I also changed the client to send the default if the
isolation flag is not set.
Fixes#22109
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Commit 03f6589f3 added basic support for pull-error event from libimage
but it contains several problems:
1. storing the error as error type prevents it from being unmarshalled,
thus change it to a string
2. the error was never propagated from the libimage event to the podman
event struct
3. the error message was not wired into the cli and API
This commit fixes these problems.
Fixes#21458
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Like docker podman network inspect should output the information of
running container with their ip/mac address on this network.
However the output format is not docker compatible as this cannot
include all the info we have and the previous output was already not
compatible so this is not new.
New example output:
```
[
{
...
"containers": {
"7c0d295779cee4a6db7adc07a99e635909413a390eeab9f951edbc4aac406bf1": {
"name": "c2",
"interfaces": {
"eth0": {
"subnets": [
{
"ipnet": "10.89.0.4/24",
"gateway": "10.89.0.1"
},
{
"ipnet": "fda3:b4da:da1e:7e9d::4/64",
"gateway": "fda3:b4da:da1e:7e9d::1"
}
],
"mac_address": "1a:bd:ca:ea:4b:3a"
}
}
},
"b17c6651ae6d9cc7d5825968e01d6b1e67f44460bb0c140bcc32bd9d436ac11d": {
"name": "c1",
"interfaces": {
"eth0": {
"subnets": [
{
"ipnet": "10.89.0.3/24",
"gateway": "10.89.0.1"
},
{
"ipnet": "fda3:b4da:da1e:7e9d::3/64",
"gateway": "fda3:b4da:da1e:7e9d::1"
}
],
"mac_address": "f6:50:e6:22:d9:55"
}
}
}
}
}
]
```
Fixes#14126
Fixes https://issues.redhat.com/browse/RHEL-3153
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
Just like all the other inspect commands that accept multiple args we
should just make podman pod inspect output a json array.
This makes the code more consistent and removes the extra workaround
which was needed before to support this.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The pasta network mode has been added in podman v4.4 and this causes a
conflict with named networks that could also be called "pasta". To not
break anything we had special logic to prefer the named network over the
network mode. Now with 5.0 we can break this and remove this awkward
special handling from the code.
Containers created with 4.X that use a named network pasta will also
continue to work fine, this chnage will only effect the creation of new
containers with a named network pasta and instead always used the
network mode pasta. We now also block the creation of networks with the
name "pasta".
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We now no longer write containers.conf, instead system connections and
farms are written to a new file called podman-connections.conf.
This is a major rework and I had to change a lot of things to get this
to compile again with my c/common changes.
It is a breaking change for users as connections/farms added before this
commit can now no longer be removed or modified directly. However because
the logic keeps reading from containers.conf the old connections can
still be used to connect to a remote host.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Update farm build to directly push images to a registry
after all the builds are complete on all the nodes.
A manifest list is then created locally and pushed to
the registry as well.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Cut is a cleaner & more performant api relative to SplitN(_, _, 2) added in go 1.18
Previously applied this refactoring to buildah:
https://github.com/containers/buildah/pull/5239
Signed-off-by: Philip Dubé <philip@peerdb.io>
Add podman farm build command that sends out builds to
nodes defined in the farm, builds the images on the farm
nodes, and pulls them back to the local machine to create
a manifest list.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
As requested in containers/podman/issues/20000, add a `privileged` field
to the containers table in containers.conf. I was hesitant to add such
a field at first (for security reasons) but I understand that such a
field can come in handy when using modules - certain workloads require a
privileged container.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add --rdt-class=COS to the create and run command to enable the
assignment of a container to a Class of Service (COS). The COS
represents a part of the cache based on the Cache Allocation Technology
(CAT) feature that is part of Intel's Resource Director Technology
(Intel RDT) feature set. By assigning a container to a COS, all PID's of
the container have only access to the cache space defined for this COS.
The COS has to be pre-configured based on the resctrl kernel driver.
cat_l2 and cat_l3 flags in /proc/cpuinfo represent CAT support for cache
level 2 and 3 respectively.
Signed-off-by: Wolfgang Pross <wolfgang.pross@intel.com>
