Since compat version 1.43 the VirtualSize field in the
GET /images/{name}/json, GET /images/json, and
GET /system/df responses is deprecated and will no
longer be included in API v1.44. Use the Size field
instead, which contains the same information.
Signed-off-by: Nicola Sella <nsella@redhat.com>
Add the Go bindings implementation necessary to support Artifacts.
Implement the tunnel interface that consumes the Artifacts Go bindings.
With this patch, users of the Podman remote clients will now be able to
manage OCI artifacts via the Podman CLI and Podman machine.
Jira: https://issues.redhat.com/browse/RUN-2714#
Signed-off-by: Lewis Roy <lewis@redhat.com>
- Remove redundant exact match checks in ancestor filter implementations
- Add comprehensive test coverage for both prefix and non-prefix substring matching
- Fix missing output verification in ID filter test
- Improve test reliability with proper length checks and consistent flags
- Remove unnecessary length check to ensure tests fail properly if image ID is too short
- Add -q and --no-trunc flags for consistent test output format
- Focus test on substring ID matching specifically (not image names)
- Restore image name matching functionality for existing tests
- Keep substring ID matching for Docker compatibility
- Ensure both regex matching and substring ID matching work together
The ancestor filter now supports both:
1. Image name matching (existing functionality)
2. Substring ID matching (new Docker compatibility feature)
Fixes: #26623
Signed-off-by: shiavm006 <shivammittal42006@gmail.com>
CLI options have no place in pkg/domain/entities, and these
are never set anyway.
Should not change behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Add --creds flag to podman create and podman run commands to support
registry authentication during image pulling.
Without this flag, users must perform a separate `podman pull
--creds/--cert-dir` first and then remember to specify `--pull=never`.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
There is no reason for local and rmeote to use a different error that
just differs in quoting. Make them consitent to simplify the tests.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
All callers ignore the error anyways so no reason to return it as the
function itself already logs it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make use of our custom ChoiceValue flag type instead of using yet
another type. With that we can remove the StringSet type.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Deadcode should that the ShouldRestart() API endpoint was never wired
into the router so the endpoint did not existed and the bindings called
a non existing endpoint which returnd 404 which the binding code
assumed means no restart.
As such remove all this code as it didn't do anything useful. And IMO
exposing a shouldrestart API always feeled wrong to me. The client
should not have to deal with this.
This commit does not change the behavior but it also does not make an
attempt to fix the broken restart handling with the rmeote client. Given
we do not seem to have any user reports about this it seems it is not
used.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Allow users to target the most recently created container with
`podman update --latest` (short `-l`). The same option already exists
on many other commands, so this brings update in line with the rest of
the CLI and saves users from typing or looking up the newest container.
Fixes: #26380
Signed-off-by: Hayato Kihara <kai.21banana@gmail.com>
As with `volume export`, this was coded up exclusively in cmd/
instead of in libpod. Move it into Libpod, add a REST endpoint,
add bindings, and now everything talks using the ContainerEngine
wiring.
Also similar to `volume export` this also makes things work much
better with volumes that require mounting - we can now guarantee
they're actually mounted, instead of just hoping.
Includes some refactoring of `volume export` as well, to simplify
its implementation and ensure both Import and Export work with
readers/writers, as opposed to just files.
Fixes#26409
Signed-off-by: Matt Heon <mheon@redhat.com>
they allow to override the owner of the volume. Differently from
-o=uid= and -o=gid= they are not passed down to the mount operation.
Closes: https://issues.redhat.com/browse/RHEL-76452
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Previously, our approach was to inspect the volume, grab its
mountpoint, and tar that up, all in the CLI code. There's no
reason why that has to be in the CLI - if we move it into
Libpod, and add a REST endpoint to stream the tar, we can
enable it for the remote client as well.
As a bonus, previously, we could not properly handle volumes that
needed to be mounted. Now, we can mount the volume if necessary,
and as such export works with more types of volumes, including
volume drivers.
Signed-off-by: Matt Heon <mheon@redhat.com>
This patch adds a new endpoint to the REST API called "artifacts" with
the following methods:
- Add
- Extract
- Inspect
- List
- Pull
- Push
- Remove
This API will be utilised by the Podman bindings to add OCI Artifact
support to our remote clients.
Jira: https://issues.redhat.com/browse/RUN-2711
Signed-off-by: Lewis Roy <lewis@redhat.com>
Added support for "podman buildx inspect". The goal was to replicate the default output from "docker buildx inspect" as
much as possible but a problem encountered was podman not supporting BuildKit. To replicate the output I resorted to
printing the statements with default values but only changed the driver name to use podman instead of docker. Since
there was no buildkit, gave it the value of "N/A" to depict it's not supported. For Platforms, I resorted to using
the emulated architectures found on your linux system + the host architecture of your local machine or podman server. The
bootstrap flag was also added but is considered a NOP since there is no buildkit container to run before running inspect.
An extra field was added to the HostInfo struct so when you run "podman info" the emulated architectures will show, this
was used so you can grab the information from the podman engine.
Fixes#13014
Signed-off-by: Joshua Arrevillaga <2004jarrevillaga@gmail.com>
Netavark v1.15 added new warnings on some invalid names and that
triggerd a new test failure in podman e2e test.
The "Podman kube play with disabled cgroup" case now complains about an
empty name:
podman [options] kube play /tmp/CI_aM20/podman-e2e-3156601197/subtest-3441376193/p/kube.yaml
[WARN netavark::network::bridge] invalid network alias "": name is empty, ignoring this name
This is because this test does not set a container name thus the code
was adding an empty string so to fix it check if the name is not empty
first.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The conditions are always true so they can be removed. And in the case
of exportCheckpoint() the scope means addToTarFiles was overwritten and
thus when it looped over it later the slice was always empty.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Instead of catching all signals and then ignoring them inside the loop
again just don't register them in Notify() to begin with.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
If the container is already removed do not log a warning as this happens
in parallel so it is possible the container was already removed. The
flake was shown in https://github.com/containers/podman/pull/26017.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add `--swap` argument to `podman machine init` command.
Passing an int64 value to this flag will trigger the Podman machine
ignition file to be generated with a zram-generator.conf file containing
the --swap value as the zram-size argument.
This file is read by the zram-generator systemd service on boot
resulting in a zram swap device being created.
Fixes: https://github.com/containers/podman/issues/15980
Signed-off-by: Lewis Roy <lewis@redhat.com>
The Docker `-XDELETE image/$name?force=true` endpoint only removes
containers using an image if they are in a non running state.
In Podman, when forcefully removing images we also forcefully delete
containers using the image including running containers.
This patch changes the Docker image force delete compat API to act like the
Docker API while maintaining commands like `podman rmi -f $imagename`
It also corrects the API return code returned when an image is requested
to be deleted with running containers using it.
Fixes: https://github.com/containers/podman/issues/25871
Signed-off-by: Lewis Roy <lewis@redhat.com>
Like podman run --rm, start --attach must also ensure the contianer is
removed before it exist. Otherwise there is a race where the container
still exist after the command exits, because removal would only happen
by the cleanup process in the background.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This looks like debug leftover, in any case this is not an error so
simply remove the line.
Fixes#25965
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
in #25884, it was pointed out that the standard detection used to
determine the artifact's file type can be wrong. in those cases, it
would be handy for the user to be able to override the media type of the
layer. as such, added a new option called `--file-type`, which is
optional, and allows users to do just that.
`podman artifact add --file-type text/yaml
quay.io/artifact/config:latest ./config.yaml `
Fixes: #25884
Signed-off-by: Brent Baude <bbaude@redhat.com>
This commit removes the code to build a local pause
image from the Containerfile. It is replaced with
code to find the catatonit binary and include it in
the Rootfs.
This removes the need to build a local pause container
image.
The same logic is also applied to createServiceContainer
which is originally also based on the pause image.
Fixes: #23292
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This `--config` option was initially added here:
4e4c3e3dbf
Under the hood this simply modifies env to set DOCKER_CONFIG=<passed
in string>
The DOCKER_CONFIG env var is used as a directory that contains
multiple config files... of which podman and container libs probably
only use `$DIR/config.json`.
See: https://docs.docker.com/reference/cli/docker/#environment-variables
The old CMD and help text was misleading... if we point the at a
regular file we can see errors like:
```
$ touch /tmp/foo/tmpcr9zrx71
$ /bin/podman --config /tmp/foo/tmpcr9zrx71 build -t foobar:latest
Error: creating build container: initializing source docker://quay.io/centos/centos:stream9: getting username and password: reading JSON file "/tmp/foo/tmpcr9zrx71/config.json": open /tmp/foo/tmpcr9zrx71/config.json: not a directory
```
^^ In this case we had created `/tmp/foo/tmpcr9zrx71` as a regular file.
Signed-off-by: Ian Page Hands <iphands@gmail.com>
Since commit 945aade38b we do tear down the kube units if all pods
failed to start. This however broke the use case of an empty pod as we
did not consider that being starting successfully which is wrong and
caused a regression for at least one user.
To fix this special case the empty pod and consider that running.
Fixes: #25786
Fixes: 945aade38b ("quadlet kube: correctly mark unit as failed")
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
No change in functionality.
I might be missing something here, but it appears to be unfinished and
unused.
Fixes: bbd085ad1e ("Podman Pod Create --cpus and --cpuset-cpus flags")
Fixes: 2d86051893 ("Pod Device-Read-BPS support")
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This was added by commit 84e42877a ("make lint: re-enable revive"),
making nolintlint became almost useless.
Remove the ungodly amount of unused nolint annotations.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
