always use the direct mapping when writing the mappings for an
idmapped mount. crun was previously using the reverse mapping, which
is not correct and it is being addressed here:
https://github.com/containers/crun/pull/1147
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
(cherry picked from commit af8d649da7)
Pulls in fixes to add back the SYS_CHROOT to the default set of
capabilities and to pull in fixes for the Docker-compat /auth endpoint
which will be cherry-picked in a subsequent commit.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
As described in #17777, the `restart` on-failure action did not behave
correctly when the health check is being run by a transient systemd
unit. It ran just fine when being executed outside such a unit, for
instance, manually or, as done in the system tests, in a scripted
fashion.
There were two issue causing the `restart` on-failure action to
misbehave:
1) The transient systemd units used the default `KillMode=cgroup` which
will nuke all processes in the specific cgroup including the recently
restarted container/conmon once the main `podman healthcheck run`
process exits.
2) Podman attempted to remove the transient systemd unit and timer
during restart. That is perfectly fine when manually restarting the
container but not when the restart itself is being executed inside
such a transient unit. Ultimately, Podman tried to shoot itself in
the foot.
Fix both issues by moving the restart logic in the cleanup process.
Instead of restarting the container, the `healthcheck run` will just
stop the container and the cleanup process will restart the container
once it has turned unhealthy.
Backport of commit 9563415430.
Fixes: #17777
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When run with --cgroups=split mode (e.g. quadlet) we do not use the a
separate cgroup for the container and just run in the unit cgroup.
When we filter logs we thus must match the unit name.
Added a small test to the quadlet test to make sure it will work.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
It makes little sense to create a log line string from the entry just to
parse it again into a LogLine. We have the typed fields so we can
assemble the logLine direclty, this makes things simpler and more
efficient.
Also entries from the passthrough driver do not use the CONTAINER_ID_FULL
field, instead we can just access c.ID() directly.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The passthrough driver is designed for use in systemd units. By default
we can expect systemd to log the output on journald unless the unit sets
differen StandardOutput/StandardError settings.
At the moment podman logs just errors out when the passthrough driver is
used. With this change we will read the journald for the unit messages.
The logic is actually very similar to the existing one, we just need to
change the filter. We now filter by SYSTEMD_UNIT wich equals to the
contianer cgroup, this allows us the actually filter on a per contianer
basis even when multiple contianers are started in the same unit, i.e.
via podman-kube@.service.
The only difference a user will see is that journald will merge
stdout/err into one stream so we loose the separation there.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Since commit 06241077cc we use the aardvark per container dns
functionality. This means we should only have the aardvark ip in
resolv.conf otherwise the client resolver could skip aardvark, thus
ignoring the special dns option for this container.
Fixes#17499
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
If the name already exists and CheckDuplicate is set we need to return
409, if CheckDuplicate is not set we return the network without error.
Fixes#17585
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The test should make sure the logs --follow call will log entries that
are created in the future when --since is used and doe not include the
container start event. However it seems the timing is to tight. I think
it was possible that CI logged the line before the logs call was made,
thus it is missing because --since excluded it.
I cannot reproduce so I am not 100% on this but we can reopen the issue
if it still happens.
Fixes#17616
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When the service is running with trace log level it wraps the
`http.ResponseWriter` to log extra information. The problem is that the
new type does not keep all the functions from the embedded type.
Instead we have to implement them ourselves, however only Write() was
implemented. Thus `Hijack()`could not be called on the writer. To
prevent these issues we would implement all the interfaces that the
inner type supports (Header, WriteHeader, Flush, Hijack).
Fixes#17749
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Do not set the runtime when processing a .container file
Let Podman choose the runtime based on its configuration
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Signed-off-by: Dan Čermák <dcermak@suse.com>
(cherry picked from commit 0d75854c52)
Only enforce the passthrough log driver for Quadlet. Commit 68fbebf
introduced a regression on the `podman-kube@` template as `podman logs`
stopped working and settings from containers.conf were ignored.
Fixes: #17482
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Tests constantly fail with zero indication of why. Fix that.
- add correct default for $QUADLET path
- add check to make sure it exists
- log quadlet commands and their output
Signed-off-by: Ed Santiago <santiago@redhat.com>
Install the signal proxy before attaching to/starting the container to
make sure there's no race-condition as revealed in the failing start/run
tests in #16901. The tests had the valid expectation that signal
forwarding works once the container is running.
Further update the tests to account for the attach test where the
expectation is that signal forwarding works once Podman has attached to
container (or even before).
Fixes: #16901
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Signed-off-by: Ed Santiago <santiago@redhat.com>
Primarily, add skip_if_journald_unavailable because RHEL.
Secondarily, reverse a flipped actual/expect assertion
that made it difficult to understand the RHEL failure.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Commit 2f29639bd3 added a UX improvement to cleanup/teardown when
running the specified YAML has failed. However, the teardown happens
unconditionally such that rerunning the same YAML file will teardown the
previously created workload instead of just failing with a name-conflict
error (e.g., "pod already exists"). The regression popped up testing
the Ansible system role with Podman v4.4.0.
For now, do not teardown at all on error to quickly fix this regression
for the upcoming Podman v4.4.1 release. The UX improvement is still
desired but must be conditional and only happen on newly created
resources, which probably requires moving it down to the backend.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Quadlet should not exit with failure if no files to process have been
found. Otherwise, even simple operations such as reloading systemd
will fail as it retriggers generators.
Fixes: #17374
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add test to verify that updates without a pids-limit specified no longer
overwrite the previous value.
Also fixes erroneous warning generated by remote clients:
"Resource limits are not supported and ignored on cgroups V1 rootless
systems"
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
We had a number of references, mostly in docs, to the word master that
can now be changed to main. This PR does that and makes the project a
bit more inclusive.
[NO NEW TESTS NEEDED]
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
If the image being used has a user set that is a positive
integer greater than 0, then set the securityContext.runAsNonRoot
to true for the container in the generated kube yaml.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
The Device, Type, Copy and Options keys are now supported in
quadlet .volume files. This allows users to create filesystem
based volumes with quadlets .volume files.
Signed-off-by: Ingo Becker <ingo@orgizm.net>
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
(podman push) and (podman manifest push) now support --sign-by-sigstore=param-file,
using the containers-sigstore-signing-params.yaml(5) file format.
That notably adds support for Fulcio and Rekor signing.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
The test was added in commit 1424f0958f, it can flake because the
attach test needs the message in the log. On slow CI systems this can
take longer. Add a retry logic which checks the container log every
second for up to 5 seconds. That should be plenty of time.
Fixes#17204
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
After https://github.com/containers/netavark/pull/452 `netavark` is
incharge of deciding `custom_dns_servers` if any so lets honor that and
libpod should not set these manually.
This also ensures docker parity
Podman populates container's `/etc/resolv.conf` with custom DNS servers ( specified via `--dns` or `dns_server` in containers.conf )
even when container is connected to a network where `dns_enabled` is `true`.
Current behavior does not matches with docker, hence following commit ensures that podman only populates custom DNS server when container is not connected to any network where DNS is enabled and for the cases where `dns_enabled` is `true`
the resolution for custom DNS server will happen via ( `aardvark-dns` or `dnsname` ).
Reference: https://docs.docker.com/config/containers/container-networking/#dns-services
Closes: containers#16172
Signed-off-by: Aditya R <arajan@redhat.com>
`default` is already used as network mode, i.e. podman run --network
default will choose the default mode not a network named `default`.
We already block names from other network modes, default was forgotten.
Fixes#17169
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Output from podman system service, on system tests, is
being saved... it just hasn't been collected as an artifact.
Start collecting it. And, remove obsolete-unused-misleading
code that made me think it _was_ being collected.
Also: log system-service output for bud tests, and set
log-level to info per suggestion from @Luap99
Signed-off-by: Ed Santiago <santiago@redhat.com>
July 2022: test was flaking on new VM images. We needed new
images, so I filed #15014 and skipped the test.
January 2023: no attention from anyone, so I'll try bumping up
a dd timeout from 10s to 30s. But in the interim, the test
has broken: it used to expect "Containerfile" in output (this
was deliberately added in #13655)... but #16810 changed that
so Containerfile no longer appears. @flouthoc argues that
this too is deliberate (#17059). Okay, so let's change the
test then. All I care about is not adding more regressions.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Reserved annotations are used internally by Podman and would effect
nothing when run with Kubernetes so we should not be generating these
annotations.
Fixes: https://github.com/containers/podman/issues/17105
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Unify the functions used to detect rootless to "isRootless()".
This function can detect to join the user namespace by mistake.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
